PeakTech P1072 True RMS Smart Digital Multimeter User Manual

Bubuka

The PeakTech P1072 is a compact, smart True RMS digital multimeter designed for accurate electrical measurements. It features automatic function recognition (Auto-Scan) and auto-ranging, simplifying operation for various tasks. This device is suitable for students, technicians, and DIY enthusiasts, offering a wide range of measurement functions including voltage, resistance, continuity, diode test, and temperature.

Émbaran Kasalametan

Always observe standard safety precautions when using electrical testing equipment. This multimeter is rated for CAT III 600 V, indicating its suitability for measurements in building installations. Ensure the device and test leads are in good condition before use. Do not attempt to measure voltagngaleuwihan wates anu ditangtukeun.

• Entong nganggo alat upami katingalina ruksak.
• Ensure correct connection of test leads for each measurement.
• Hindarkeun kontak sareng sirkuit langsung.
• Ganti batréna gancang-gancang nalika indikator batré lemah némbongan.

Eusi pakét

Pastikeun yén sadaya item aya dina bungkusan:

• PeakTech P1072 Digital Multimeter
• Kabel Tés (Beureum sareng Hideung)
• Sénsor Suhu
• Batré AAA (2x)
• Instruksi Manual

Image: The PeakTech P1072 multimeter shown with its included test leads, temperature sensor, and two AAA batteries.

Produk Leuwihview

Familiarize yourself with the components of your PeakTech P1072 multimeter:

Image: A detailed diagram highlighting the LCD display, function buttons, input jacks, NCV sensor, and LED light on the PeakTech P1072 multimeter.

• Layar LCD: 4000 count display with blue backlight for clear readings. Changes to red for NCV or Live Test detection.
• O/FUNC Button: Power On/Off and function selection in certain modes.
• HOLD/* Button: Freezes the current reading on the display. Also activates the backlight/LED flashlight.
• Input Jacks:
  • COM (Umum): For black test lead.
  • VΩHzLIVE: For red test lead for voltage, resistance, frequency, Live Test, diode, continuity, and temperature measurements.
• Sénsor NCV: Tempatna di luhur pikeun voltase non-kontaktage deteksi.
• Lampu LED: Integrated flashlight on the back for illuminating dark work areas.
• Kickstand: Foldable stand on the back for hands-free operation.

Disetél

1. Pamasangan batré

The multimeter requires two AAA batteries. To install or replace them:

1. Pastikeun multimeter dipareuman sareng kabel uji dipegatkeun.
2. Tangtukeun lokasi kompartemen batré dina tonggong alat.
3. Open the battery cover using a screwdriver if necessary.
4. Pasangkeun dua batré AAA, bari tetep merhatikeun polaritasna (+/-) anu bener.
5. Tutup panutup batre aman.

2. Nyambungkeun Test Leads

Connect the test leads as follows for most measurements:

• Selapkeun lead test hideung kana COM jack.
• Selapkeun lead test beureum kana VΩHzLIVE jack.

Parentah Operasi

Daya Hurung/Pareuman

Pencét éta O/FUNC button to turn the multimeter on. Press and hold the O/FUNC button for approximately 5 seconds to turn it off.

Auto-Scan and Auto-Range Function

The P1072 features an intelligent SCAN otomatis function. When powered on, the device automatically detects the type of measurement (AC/DC voltage, resistance, continuity) based on the connected circuit. The AUTO-RANGE function automatically selects the appropriate measurement range for optimal accuracy.

Image: The PeakTech P1072 multimeter in use, demonstrating its ability to measure voltage, resistance, frequency, capacitance, diode, and temperature.

Fungsi Pangukuran

• Voltage Measurement (ACV/DCV):

  Connect the test leads to the circuit in parallel. The multimeter will automatically detect AC or DC voltage. Max input: 600V AC/DC.
• Pangukuran Résistansi (Ω):

  Ensure the circuit is de-energized. Connect the test leads across the component to measure resistance.

• Uji Kontinuitas ()))):

  For checking circuit continuity. If resistance is below a certain threshold, an audible beep will sound.

• Diode Test (→|):

  Connect the test leads across the diode. The display will show the forward voltage teundeun.
• Temperature Measurement (°C):

  Connect the included temperature sensor to the VΩHzLIVE and COM jacks. The display will show the temperature reading.

• Pangukuran Kapasitansi (F):

  Ensure the capacitor is discharged before testing. Connect the test leads across the capacitor terminals.

• Pangukuran Frékuénsi (Hz):

  Connect the test leads to the signal source. The multimeter will display the frequency.
• NCV (Non-Kontak Voltage) Deteksi:

  Hold the top part of the multimeter near a live AC voltage source. The display backlight will turn red, and an audible alarm will sound if voltage dideteksi.

• Tes LIVE:

  Insert the red test lead into the VΩHzLIVE jack and touch the probe to a live conductor. The display backlight will turn red, indicating a live phase. The black lead is not used for this test.

HOLD Function and Backlight/LED

Pencét éta HOLD/* button briefly to freeze the current reading on the display. Press it again to release. Press and hold the HOLD/* button to activate the display backlight and the integrated LED flashlight. Press and hold again to turn them off.

Pangropéa

Ngagantian batré

When the low battery indicator appears on the display, replace the batteries as described in the "Setup" section to ensure accurate measurements.

beberesih

Usap alat ku iklanamp lawon sareng deterjen anu hampang. Entong nganggo bahan abrasif atanapi pangleyur. Pastikeun alatna garing pisan sateuacan dianggo.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

The PeakTech P1072 Digital Multimeter comes with a 3-taun jaminan produsén urang. For technical support, service, or warranty claims, please contact your retailer or PeakTech customer service. Refer to the official PeakTech website for contact information and further resources.

Kanggo inpo nu leuwih lengkep, buka di PeakTech Brand Store.