Fuxtec FX-MH123ECO Thermal Hedge Trimmer User Manual

Bubuka

The Fuxtec FX-MH123ECO is a powerful and efficient thermal hedge trimmer designed for precise and effortless trimming of hedges and shrubs. Equipped with a 2-stroke 25.4 cm³ engine, it delivers 0.7 kW of power, capable of cutting branches up to 28 mm thick. Its 560 mm blade length allows for quick and accurate work on large areas. The centrifugal clutch ensures safe operation by stopping the blades automatically at idle. With an ergonomic design and reduced vibration levels (2.56 m/s²), it offers optimal comfort even during extended use. The large 650 ml fuel tank provides maximum autonomy without interruption. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Fuxtec hedge trimmer.

Image: The Fuxtec FX-MH123ECO thermal hedge trimmer, showcasing its engine, handles, and long cutting blade.

Émbaran Kasalametan

Utamakeun kasalametan nalika ngoperasikeun alat-alat listrik. Baca sareng pahami sadaya peringatan sareng pitunjuk kaamanan sateuacan dianggo.

• Alat Pelindung Diri (APD): Always wear safety glasses, hearing protection, gloves, and sturdy footwear. Long pants and sleeves are recommended.
• Penanganan BBM: Handle fuel in a well-ventilated area, away from ignition sources. Do not smoke while refueling.
• Wewengkon Gawé: Keep the work area clear of bystanders, children, and pets. Ensure good footing and balance.
• Kasalametan sabeulah: The blades are extremely sharp. Never touch the blades when the engine is running. Ensure the engine is off and the blade has stopped before performing any adjustments or maintenance.
• Geter: Prolonged exposure to vibrations can cause injury. Take regular breaks and use anti-vibration gloves if available.
• Stopan Darurat: Familiarize yourself with the location and operation of the emergency stop switch.

Komponén Langkungview

Familiarize yourself with the main components of your Fuxtec FX-MH123ECO hedge trimmer.

Image: Diagram illustrating key components including the 2-stroke engine, practical handle, flexible 90° pivoting handle, integrated blade protection, and precise cutting blade with 56cm cutting length.

• Unit Mesin: The 2-stroke 25.4 cm³ engine provides power for cutting.
• Tangki BBM: 650 ml capacity for fuel mixture.
• Gagang hareup: Ergonomic handle for stable grip and control.
• Rear Handle (Pivoting): Flexible handle that pivots 90° to the left or right for comfortable cutting in various directions.
• Sabeulah motong: 560 mm long, made of hardened steel for precise and clean cuts.
• Perlindungan sabeulah: Integrated protection for safe transport and storage.
• Throttle pemicu: Controls engine speed and blade movement.
• Stop Switch: For immediate engine shutdown.

Disetél

1. Fuel Mixture Preparation

The FX-MH123ECO uses a 2-stroke engine and requires a specific fuel mixture. Use unleaded gasoline mixed with high-quality 2-stroke engine oil at a ratio of 1:40 (1 part oil to 40 parts gasoline).

• Always mix fuel in a clean, approved fuel container.
• Shake the container well before filling the hedge trimmer's fuel tank.
• Do not store mixed fuel for extended periods.

2. Filling the Fuel Tank

1. Pastikeun mesin pareum sareng tiis.
2. Teundeun trimmer pager hirup dina datar, permukaan stabil.
3. Buka tutup tangki bahan bakar kalawan ati-ati.
4. Pour the prepared fuel mixture into the tank using a funnel to prevent spills. Do not overfill.
5. Securely close the fuel tank cap. Wipe away any spilled fuel immediately.

Parentah Operasi

1. Mimitian Mesin

1. Place the hedge trimmer on a firm, flat surface. Ensure the blade is clear of any obstructions.
2. Set the stop switch to the "ON" position.
3. Pasangkeun cok (upami dihurungkeun tiis).
4. Pencét bohlam primer sababaraha kali dugi suluh katingali.
5. Pull the starter cord firmly and smoothly until the engine fires (usually 1-3 pulls).
6. Once the engine fires, disengage the choke.
7. Pull the starter cord again until the engine runs smoothly.
8. Ngidinan mesin pikeun haneut nepi sababaraha moments saméméh ngalakonan throttle nu.

2. Operasi motong

• Tahan trimmer pager hirup pageuh ku duanana leungeun.
• Maintain a stable stance and balance.
• Start cutting from the bottom of the hedge and work your way up for vertical cuts. For horizontal cuts, move the trimmer in a sweeping motion.
• Do not force the blade through thick branches. The maximum cutting capacity is 28 mm.
• Utilize the 90° pivoting rear handle for ergonomic cutting angles. Unlock, rotate, and lock the handle as needed.

3. Ngeureunkeun Mesin

To stop the engine, simply move the stop switch to the "OFF" position. The centrifugal clutch will ensure the blades stop moving when the engine idles down.

Pangropéa

Pangropéa rutin ngajamin umur panjang sareng kinerja optimal tina trimmer pager hirup anjeun.

1. Pangropéa sabeulah

• beberesih: After each use, clean the blades of sap, debris, and resin. Use a stiff brush and a suitable cleaning agent.
• Lubrication: Larapkeun jaket lampu tina minyak mesin atawa pelumas sabeulah kana wilah sanggeus beberesih pikeun nyegah karat tur mastikeun operasi mulus.
• Asah: If the blades become dull, they can be sharpened by a qualified technician or with appropriate sharpening tools. Always ensure the engine is off and the spark plug cap is removed before handling blades for sharpening.

Gambar: A close-up view of the hardened steel cutting blades, highlighting their sharp edges and robust construction.

2. Saringan hawa

Check and clean the air filter regularly, especially in dusty conditions. A clogged air filter can reduce engine performance and increase fuel consumption. Clean with warm soapy water, rinse, and allow to dry completely before reinstallation, or replace if heavily soiled.

3. Spark Colokkeun

Inspect the spark plug periodically. Clean any carbon deposits and adjust the gap if necessary. Replace the spark plug if it is worn or damaged.

4. Panyimpenan

When storing the hedge trimmer for an extended period:

• Drain the fuel tank completely or run the engine until it runs out of fuel.
• Bersihkeun sakabéh unit sacara saksama.
• Apply a rust preventative to the blades.
• Store in a dry, well-ventilated area, out of reach of children.

Pamérésan masalah

spésifikasi

Technical specifications for the Fuxtec FX-MH123ECO Thermal Hedge Trimmer.

Image: Visual representation of key technical data including weight, fuel mixture, engine displacement, blade length, engine type, max cutting thickness, power, and starter type.

Garansi sareng Rojongan

For warranty information, technical support, or spare parts, please contact Fuxtec customer service. Keep your purchase receipt as proof of purchase.

• Fuxtec Customer Service: Refer to the contact information provided with your product packaging or visit the official Fuxtec websitus.
• Suku cadang: Fuxtec aims to provide long-term availability of spare parts for their products.