GDFStudio Full Size Floor Platform Bed with Fence and Door - Instruction Manual

1. Bubuka

Thank you for choosing the GDFStudio Full Size Floor Platform Bed with Fence and Door. This manual provides detailed instructions for the assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Émbaran Kasalametan

• Majelis Dewasa Diperlukeun: Produk ieu kedah dirakit ku déwasa. Tetep barudak jauh salila assembly.
• Baca pituduh: Ensure all instructions are read and understood before assembly and use.
• Pariksa Sadaya Bagian: Verify that all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Use on Level Surface: Assemble and use the bed on a flat, stable, and level surface to prevent tipping.
• Kencangkeun Fasteners: Periodically check and tighten all fasteners to ensure the bed remains stable. Do not overtighten.
• Batesan Beurat: Do not exceed the recommended weight limit for a full-size bed frame.
• Taya Box Spring Diperlukeun: This platform bed is designed for use without a box spring. Using a box spring may raise the mattress height excessively.

3. Eusi Paket

Before assembly, please ensure all components listed below are present in your package. If any parts are missing or damaged, please contact customer support.

Image: Detailed diagram illustrating all components and their respective dimensions for the bed frame.

Daptar komponén:

• Headboard/Footboard Panels
• Side Rails with Fence
• Panel Panto
• Rojongan Slats
• Center Support Legs (if applicable)
• Pakét Hardware (sekrup, baut, konci Allen)
• Instruksi Manual

4. Setup jeung Majelis

Follow these steps carefully for a smooth assembly process. It is recommended to assemble the bed with two adults.

1. Ngabongkar komponén: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (like a carpet) to prevent scratches.
2. Pasang rel samping: Attach the side rails to the headboard and footboard panels using the provided hardware. Ensure all connections are secure but do not fully tighten until the frame is complete.
3. Pasang Pintu: Attach the door panel to the designated opening on the side rail using the hinges and latch provided. Ensure the door swings freely and latches securely.


Image: Detail of the door's hinge and latch for secure closure.

4. Pasangkeun bilah pangrojong: Lay the wooden support slats across the bed frame. Ensure they are evenly spaced and secured to the side rails as per the instructions. These slats provide mattress support and eliminate the need for a box spring.


Gambar: View of the sturdy wooden slats providing mattress support.

5. Panyegelan ahir: Once all parts are assembled, go back and fully tighten all screws and bolts. Do not overtighten to avoid damaging the wood.
6. Posisi ranjang: Pindahkeun rangka ranjang anu parantos dipasang kalayan ati-ati ka lokasi anu dipikahoyong.

5. Parentah Operasi

This floor platform bed is designed for direct mattress placement. No box spring is required. The integrated fence and door provide a secure and enclosed sleeping area.

• Penempatan kasur: Place your full-size mattress directly onto the wooden support slats.
• Fungsi Panto: The small door allows for easy entry and exit. Ensure the latch is properly engaged when the door is closed to keep it secure.
• Pro lowfile Desain: The low height of the bed makes it easily accessible.

Image: The assembled bed frame with a mattress and decorative items, showcasing éta pro-rendahfile design and fence.

6. Pangropéa

• beberesih: Lap rangka kai ku kaén nu lemes,amp lawon. Hindarkeun bahan kimia anu kasar atanapi pembersih abrasive anu tiasa ngaruksak finish.
• Inspeksi rutin: Périodik pariksa sagala bolts na screws pikeun mastikeun aranjeunna kedap. Retighten lamun perlu.
• Hindarkeun Uap: Keep the bed away from excessive moisture or direct sunlight to prevent warping or fading of the wood.

7. Cara ngungkulan

Masalah umum sareng Solusi:

• Ranjang karasa goyah: Ensure all bolts and screws are fully tightened. Check that the bed is on a level surface.
• Slats are not fitting: Double-check that the side rails are correctly installed and that the slats are oriented properly.
• Panto teu nutup kalawan bener: Inspect hinges and latch for any obstructions or misalignment. Adjust if needed.

8. Spésifikasi

9. Garansi jeung Rojongan

GDFStudio products are manufactured with quality and care. For any questions regarding assembly, missing parts, or product defects, please contact GDFStudio customer support. Please have your model number (326331W) and purchase information ready when contacting support.

For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official GDFStudio websitus.