Buku Panduan Pangguna Kit Pangwangunan Mini IoT M5Stack M5StickC PLUS2 ESP32-PICO-V3-02

1. Bubuka

The M5Stack M5StickC PLUS2 is a compact, versatile IoT development kit powered by the ESP32-PICO-V3-02 chip. It integrates essential components such as a 1.14-inch TFT display, IMU, IR emitter, RTC, microphone, buzzer, and programmable buttons, making it suitable for rapid prototyping, wearable devices, smart home applications, and STEM education.

Gambar 1: Hareupeun view of the M5Stack M5StickC PLUS2 device.

2. Produk Langkungview jeung Komponén

2.1 Fitur konci

• Powerful ESP32 Chip & Wi-Fi: Features ESP32-PICO-V3-02 dual-core 240MHz with 2MB PSRAM and 8MB Flash for efficient processing and stable wireless connectivity.
• All-in-One Compact Design: Integrates IMU, IR emitter, RTC, microphone, buzzer, buttons, and a 1.14-inch TFT display within a 48×24×13.5mm form factor.
• Batré 200mAh ditingkatkeun: Built-in rechargeable Li-ion battery for extended operation.
• Pangwangunan Multi-Platform: Compatible with UiFlow1/UiFlow2, Arduino IDE, ESP-IDF, and PlatformIO.
• Expansion & Versatile Applications: Supports HAT and Unit series modules via an expansion connector, suitable for STEM education, smart home devices, and DIY IoT projects.

Figure 2: Summary of M5StickC PLUS2 key features including battery, buzzer, and expansion capabilities.

2.2 Idéntifikasi komponén

Familiarize yourself with the various components and interfaces of the M5StickC PLUS2:

Figure 3: Detailed diagram identifying buttons, ports, and internal components of the M5StickC PLUS2.

• Buttons A, B, C: User-programmable input buttons. Button C also functions as the power switch (press for 6 seconds to turn off).
• Palabuhan USB-C: Used for charging the device and programming/data transfer.
• Konektor HY2.0-4P: Expansion port for connecting M5Stack Unit series modules.
• Layar TFT 1.14 inci: Color LCD for visual output.
• IR Emitter (G19): Pemancar infrabeureum pikeun aplikasi kontrol.
• LED (G19): Indikator status LED.
• Microphone (SPM1423): Pikeun input audio.
• Buzzer (G2): Pikeun eupan balik audio.
• External 8-Pin Connector: Provides access to GPIO pins (GND, 5V, G26, G36/G25, G0, BAT, 3V3, 5V).

Gambar 4: Top view of the M5StickC PLUS2 showing the pinout for the external 8-pin connector.

angka 5: Tutup-up view of the USB-C port and HY2.0-4P expansion connector.

3. Setup jeung ngamimitian

3.1 Daya Awal Hurung sareng Ngecas

To power on the M5StickC PLUS2, press the side button (Button C) briefly. To turn off, press and hold Button C for approximately 6 seconds. Charge the device using the USB-C port and a standard 5V USB power adapter. The built-in 200mAh battery provides portable power.

3.2 Setelan Lingkungan Pangwangunan

The M5StickC PLUS2 supports multiple development platforms. For detailed instructions on setting up your preferred environment (UiFlow, Arduino IDE, ESP-IDF, PlatformIO), please refer to the official M5Stack documentation websitus.

Figure 6: Steps to access tutorials and documentation on the M5Stack websitus.

1. Nganjang m5stack.com.
2. Click on "DOCUMENT".
3. Milarian pikeun your product (M5StickC PLUS2).
4. Scroll down and find the "Learn" section for guides and examples.

4. Operasi

4.1 Interaksi Dasar

The M5StickC PLUS2 features a 1.14-inch TFT display for visual feedback and three programmable buttons (A, B, C) for user input. The specific functions of these buttons and the display content will depend on the firmware loaded onto the device.

4.2 Programming and Applications

The M5StickC PLUS2 is designed for a wide range of IoT and embedded applications. Its Wi-Fi capabilities enable network connectivity, while the IR emitter allows for remote control functionalities. The integrated IMU (MPU6886) provides motion sensing for various projects. Detailed programming examples and application guides are available on the M5Stack documentation portal.

Gambar 7: Kelamples of M5StickC PLUS2 applications, including smart home devices, DIY projects, STEM education, and wearable devices.

Figure 8: The M5StickC PLUS2 configured as a wearable device.

5. Spésifikasi

The following table details the technical specifications of the M5Stack M5StickC PLUS2:

Figure 9: Visual representation of M5StickC PLUS2 specifications.

5.1 Diménsi Fisik sareng Beurat

Figure 10: Dimensions of the M5StickC PLUS2 (48mm x 24mm x 13.5mm).

Figure 11: The M5StickC PLUS2 device weighing 16.7 grams.

6. Pangropéa

To ensure the longevity and proper functioning of your M5StickC PLUS2, follow these general maintenance guidelines:

• Jaga alat tetep beresih sareng bebas tina lebu sareng lebu. Anggo kaén anu lemes sareng garing pikeun beberesih.
• Hindarkeun alat ka suhu ekstrim, kalembaban, atanapi sinar panonpoé langsung.
• Ulah neuleumkeun alat dina cai atawa cairan séjén.
• Handle with care to prevent physical damage to the screen or connectors.
• Cas alat sacara rutin, khususna upami bakal disimpen kanggo waktos anu lami, pikeun ngajaga kasehatan batréna.

7. Cara ngungkulan

This section addresses common issues you might encounter with your M5StickC PLUS2.

Figure 12: Frequently Asked Questions and troubleshooting steps.

Q1: Why is my StickC/CPlus/CPlus2 black screen/won't boot/can't burn firmware/can't connect to my computer?

Mangga turutan parentah ieu:

1. Observe whether there are any obvious physical damage marks on the device.
2. Install the device driver:
   • Windows: CH9102_VCP_SER_Windows.exe
   • macOS: CH9102_VCP_MacOS_v1.7.zip
3. Connect the device using a USB cable and open the device manager. Check whether the device manager page refreshes when the device is inserted, and whether a new device appears in Universal Serial Bus controllers. If not:
   • If you are using USB Type-C to Type-C cable: First disconnect the StickCPlus2, turn off the device, and then plug in the cable (press and hold the power button until the green light turns on to indicate that it is turned off). Or replace it with an A to C cable.
   • If you are using USB A to C cable: "Try to change the data cable", "Try to reinstall the driver", "Try to change the PC".
4. Reburn the factory firmware: docs.m5stack.com/en/guide/restore_factory/m5stickc_plus2
5. The screen is still black after burning:
   • Press and hold the leftmost button until the green light inside turns on, then plug in the USB cable.
   • Observe whether the screen is black but has a faint backlight, and whether there is a beep sound when pressing the button.

Q2: A fatal error occurred: failed to connect to esp32: wrong boot mode detected (0xb)!: the chip needs to be in download mode.

Use a DuPont cable to connect GPIO0 and GND on the top of StickCPlus2 in the off state, then plug it into the computer, unplug the DuPont and try burning again.

8. Daptar pengiriman barang

The M5Stack M5StickC PLUS2 package includes the following items:

Figure 13: Contents of the M5StickC PLUS2 package.

• M5StickC PLUS2 x 1

9. Pangrojong sareng Jaminan

For further technical support, detailed documentation, community forums, and warranty information, please visit the official M5Stack websitus:

www.m5stack.com

M5Stack is committed to providing comprehensive resources for developers and users. Please refer to the website for the most up-to-date information regarding product support and warranty policies.