1. Bubuka
This manual provides detailed instructions for the safe and effective use of your Dasqua 220° Digital Angle Finder Protractor. Please read this manual thoroughly before operating the device and retain it for future reference. This tool is designed for precise angle measurement in various applications, including woodworking, metalworking, and construction.
2. Produk Langkungview
The Dasqua Digital Angle Finder Protractor is a versatile measuring instrument featuring a 425mm sliding leg, dual bubble levels, and a backlit LCD for clear readings. It is built for durability and accuracy in demanding environments.
2.1 Fitur konci
- Precise Angle Measurement: Measures angles up to 220° with an accuracy of ±0.2°.
- MTR/COM Modes: Dedicated modes for calculating double miter angles and compound errors.
- 425mm Sliding Leg: Facilitates measurements in tight spaces and offers smooth adjustments.
- Mékanisme ngonci: Ensures angles are securely held for transfer.
- Tingkat Gelembung Ganda: For horizontal and vertical leveling, providing 1.5mm/m accuracy.
- LCD backlit: 0.1° resolution display for clear visibility in various lighting conditions.
- Konstruksi awét: IP54 waterproof housing, resistant to dust, water, and oil.
2.2 Komponén
- Badan Utama: Houses the digital display and primary measuring arm.
- Sliding Leg (Extension Plate): Extends from the main body for measuring larger angles or reaching into confined spaces.
- Lock Knob: Secures the sliding leg at a desired angle.
- Layar LCD: Shows digital angle readings and mode indicators.
- Tombol kontrol: (On-Off, Hold, 180°, MTR, COM) for various functions.
- Tingkat gelembung: One horizontal and one vertical for traditional leveling.
3. Setélan
3.1 Pamasangan batré
The device requires 2 x 1.5V LR6 (AA) batteries for the digital display. To install:
- Locate the battery compartment cover, typically on the side or back of the main body.
- Buka panutup.
- Pasangkeun dua batré AA, pastikeun polaritasna bener (+/-).
- Tutup panutup kompartemen batré aman.
The bubble levels operate mechanically and do not require batteries.
3.2 Daya Awal Hurung
Pencét éta Hurung-Pareum button to power on the device. The backlit LCD will illuminate, displaying "0.0" or the current angle.
4. Parentah Operasi
4.1 Basic Angle Measurement
- Daya dina alat.
- Place the main body and the sliding leg against the surfaces whose angle you wish to measure.
- Adjust the sliding leg until it aligns perfectly with the second surface.
- Read the angle directly from the backlit LCD display.
- Use the lock knob to secure the angle for transfer if needed.
4.2 MTR (Simple Miter) Mode
Pencét éta MTR button to enter Simple Miter Mode. This mode is useful for calculating the miter angle required for a joint. The display will show the miter angle (half of the measured angle) needed for a perfect joint.
4.3 COM (Compound Bevel Cutting) Mode
Pencét éta COM button to enter Compound Bevel Cutting Mode. This mode assists in calculating compound angles for complex cuts, such as crown molding or roof rafters. Refer to specific project requirements for interpreting the displayed values in this mode.
4.4 Fungsi Tahan
Pencét éta Tahan button to freeze the current angle reading on the LCD. This is useful when measuring in awkward positions where reading the display directly is difficult. Press Tahan again to release the reading.
4.5 180° Supplementary Angle Display
Pencét éta 180° button to display the supplementary angle (180° minus the measured angle). This is useful for certain applications where the inverse angle is required.
4.6 Nol Setélan
To set the current position as the zero reference, fully close the angle finder and press the Hurung-Pareum button briefly. The display will reset to "0.0". This allows for relative angle measurements.
4.7 Using the Bubble Levels
The angle finder includes two traditional bubble levels for quick horizontal and vertical leveling. These levels operate independently of the digital display and do not require batteries. Align the tool with the surface and observe the bubble to determine level or plumb.
5. Pangropéa
- beberesih: Wipe the device with a soft, dry cloth after each use. For stubborn dirt, a slightly damp lawon bisa dipaké. Hindarkeun pembersih atawa pangleyur anu abrasif.
- Panyimpenan: Store the angle finder in its included storage bag in a dry, clean environment when not in use.
- Ngagantian batré: Replace batteries when the display becomes dim or unresponsive. Remove batteries if the device will not be used for an extended period to prevent leakage.
- Peunteun IP54: The device is IP54 rated, meaning it is protected from dust ingress and splashing water from any direction. While durable, avoid submerging the device in water.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pintonan kosong atanapi taram. | batré lemah atawa maot; pamasangan batré salah. | Ganti batré ku batré AA anyar, mastikeun polaritasna bener. |
| Inaccurate angle readings. | Device not properly zeroed; obstruction; damaged sensor. | Perform zero-setting procedure. Ensure surfaces are clean and flat. If problem persists, contact support. |
| Sliding leg does not lock securely. | Lock knob not tightened sufficiently; debris in mechanism. | Ensure lock knob is fully tightened. Clean any debris from the sliding mechanism. |
7. Spésifikasi
- Rentang ukur: 0-220 °
- Akurasi: ± 0.2°
- Resolusi: 0.1°
- Sliding Leg Length: 425 mm
- Bubble Level Accuracy: 1.5 mm/m
- Sumber Daya: 2 x 1.5V LR6 (AA) batteries (for digital display)
- Bahan: alumunium
- Rating panyalindungan: IP54 (Tahan cai tina lebu sareng cipratan)
- Beurat barang: 1.28 pon
- Ukuran Paket: 17.87 x 9.17 x 1.77 inci
8. Garansi jeung Rojongan
Dasqua products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Dasqua websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen resi pameseran anjeun salaku bukti pameseran.
Pikeun pitulung salajengna, anjeun tiasa nganjang ka Dasqua Store on Amazon.
