EZVALO EZV-4PACK-UCL-3200 12-inch Under Cabinet Lighting Instruction Manual

Bubuka

Thank you for choosing EZVALO Under Cabinet Lighting. This manual provides detailed instructions for the installation, operation, and maintenance of your new motion sensor lights. Please read this manual thoroughly before use and retain it for future reference.

Naon dina Box

• Under cabinet lighting (4 units)
• Adhesive metal plate (8 units)
• Type C Charging Cable (4 units)
• Buku Panduan (1 unit)

Image: The package contents including four light bars, charging cables, adhesive metal plates, and the instruction manual.

Fitur

• Motion-Activated Light with Multiple Modes: Detects motion within 12 ft and a 120° field, automatically turning on and then switching off after 20 seconds of no movement. Features Night Mode (activates only in low-light), Day Mode (activates anytime motion is detected), and Always-On Mode for continuous light.
• Long-Lasting & Rechargeable: Built-in 3200mAh battery provides up to 13.5 hours of continuous lighting at maximum brightness or 16-49 days in motion-sensing mode (depending on usage frequency). Fully recharges in approximately 4.5 hours. Four Type-C cables are included.
• Three Adjustable Color Temperatures & Dimmable: Choose from Warm White (3000K), Natural White (4500K), and Cool White (6500K). Brightness is adjustable from 10% to 100%.
• Easy Installation & Multi-Use: Features super-strong built-in magnets for instant installation on metal surfaces. Includes adhesive iron plates for mounting on non-metal surfaces. Ideal for kitchens, cabinets, closets, counters, stairs, hallways, pantries, basements, and shelves.

Setup sareng Instalasi

1. Nyiapkeun permukaan: Pastikeun permukaan pamasangan bersih, garing, sareng rata.
2. Attach Metal Plates (for non-metal surfaces): If installing on a non-metal surface (e.g., wood, glass, ceramic tile), peel off the protective film from the adhesive metal plate. Stick the metal plate firmly to the desired location. For each light, use two metal plates aligned with the magnetic areas on the back of the light.
3. Pasang Lampu: The EZVALO light bars have built-in magnets. Simply attach the light bar directly to a metal surface or onto the previously installed adhesive metal plates. The magnetic attachment allows for easy removal for charging.

Image: Visual guide for magnetic installation using adhesive metal plates.

Tips Instalasi:

• Maintain a distance of more than 20 inches between multiple lights to avoid interference.
• Avoid placing lights facing each other.
• Do not install too close to the edge of a surface, as this may affect motion detection.

Image: Guidelines for optimal light placement and common installation errors to avoid.

Parentah Operasi

Kontrol Panel Langkungview:

Gambar: Detil view of the control panel showing the PIR motion sensor, mode button, and light adjustment button.

• Hurungkeun ON / OFF: Located on the side of the light bar. Slide to 'ON' to activate, 'OFF' to power down completely.
• Tombol Mode (M): Single press to cycle through lighting modes: Always-On, Day Mode, Night Mode.
• Tombol Pangaluyuan Lampu:
  • Pers Tunggal: Cycles through 3 color temperatures: Warm White (3000K), Natural White (4500K), Cool White (6500K).
  • Pencét Panjang: Adjusts brightness from 10% to 100%. The light has a brightness memory function.

Modeu cahaya:

• Modeu Salawasna Hurung: Nyayogikeun cahaya anu terus-terusan.
• Mode poé: Activates with motion detection at any time, regardless of ambient light.
• Modeu wengi: Activates only in low-light environments when motion is detected.

Image: Visual representation of the three operational modes for the EZVALO lights.

Color Temperature and Dimming:

Gambar: Examples of the three adjustable color temperatures and dimmable brightness settings.

Ngecas

When the battery is low, the light indicator will turn red. Connect the included Type-C charging cable to the charging port on the side of the light bar and to a USB power source. The indicator light will turn green when fully charged.

Image: Illustration of the charging process, highlighting the Type-C port and indicator lights.

Pangropéa

• beberesih: Wipe the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Perawatan batré: For optimal battery life, avoid fully depleting the battery frequently. Recharge when the indicator light turns red.
• Panyimpenan: If storing the lights for an extended period, charge them fully and then turn them off using the side switch. Recharge every 3-6 months to maintain battery health.

Pamérésan masalah

• Lampu teu hurung:
  • Pariksa naha saklar ON/OFF aya dina posisi 'ON'.
  • Pastikeun batréna geus dieusian.
  • Verify the selected mode (Day Mode, Night Mode, Always-On) is appropriate for the current environment.
• Sénsor gerak henteu jalan:
  • Ensure the light is not in 'Always-On' mode.
  • Check for obstructions blocking the PIR motion sensor.
  • Confirm the ambient light conditions are suitable for 'Night Mode' if selected.
• Light falls off:
  • Ensure the installation surface was clean and dry before applying adhesive metal plates.
  • Press the adhesive plates firmly for at least 10 seconds during installation.
  • If using on a metal surface, ensure the magnets are making full contact.

spésifikasi

Video Produk Resmi

Video: An official product video demonstrating the features and uses of the EZVALO Under Cabinet Lighting.

Garansi sareng Rojongan

This product comes with a Limited Warranty. For specific warranty details and support, please refer to the warranty information included in your product packaging or visit the official EZVALO websitus.

Kanggo bantosan salajengna, anjeun ogé tiasa nganjang ka EZVALO Store on Amazon.