FOXWELL BT630 Bluetooth Battery Monitor & BT705 Plus Car Battery Tester User Manual

1. Bubuka

This manual provides detailed instructions for the FOXWELL BT630 Bluetooth Battery Monitor with Shunt and the FOXWELL BT705 Plus Car Battery Tester. The BT630 offers real-time battery monitoring via Bluetooth, while the BT705 Plus is a comprehensive 12V and 24V car battery analyzer. Please read this manual thoroughly before operating the devices to ensure proper usage and safety.

2. Produk Langkungview

2.1 FOXWELL BT705 Plus Car Battery Tester

The BT705 Plus is designed for comprehensive battery health testing, supporting 12V and 24V systems. It performs various tests to assess the condition of different battery types, including Flooded (Regular), EFB, GEL, AGM Flat Plate, and Spiral batteries. It is suitable for a wide range of vehicles and equipment.

Image: The BT705 Plus display showing various battery health tests including State of Health (SOH), State of Charge (SOC), Charging Test, Voltage Test, Ripple Analysis, Cranking Test, Resistance Test, and Load Test.

Image: The BT705 Plus features a 2.8-inch color LCD display for easier navigation and clearer results, offering step-by-step guidance during testing.

Image: The BT705 Plus is compatible with 12V and 24V batteries, including EFB, GEL, Flooded, and AGM types, and can be used for Cars, RVs, SUVs, ATVs, Motorcycles, Tractors, Trucks, Boats, Mowers, and Yachts.

2.2 FOXWELL BT630 Bluetooth Battery Monitor with Shunt

The BT630 is a Bluetooth-enabled battery monitor designed for real-time tracking of battery performance. It supports high-current monitoring up to 600A and a wide voltage range from 10V to 120V. This device is ideal for RVs, EVs, marine systems, off-grid setups, portable power stations, and outdoor devices, providing critical data through a dedicated mobile application.

Image: The BT630 app displays real-time metrics such as Voltage, Current, Battery Level, Remaining Capacity, Estimated Time of Use, Estimated Full Time, Temperature, Power, Cumulative Charge, and Cumulative Discharge.

Image: The BT630 shunt features an 8-layer safety protection system, including safeguards against low voltage, leuwih voltage, discharge overcurrent, charging overcurrent, overpower, over temperature, low temperature, and low State of Charge (SoC).

Image: The BT630 is engineered for high precision, featuring a built-in shunt with an error margin of only ±0.4% for accurate measurements.

3. Setup jeung Instalasi

3.1 FOXWELL BT705 Plus Car Battery Tester Setup

1. Sambungkeun Clamps: Ensure the vehicle ignition is off. Connect the red positive (+) clamp to the positive terminal of the battery and the black negative (-) clamp ka terminal négatip.
2. Daya Hurung: The BT705 Plus will power on automatically once connected to the battery.
3. Pilih Jenis Batré: Use the navigation buttons to select the correct battery type (e.g., Flooded, EFB, GEL, AGM) from the menu.

3.2 FOXWELL BT630 Bluetooth Battery Monitor with Shunt Installation

The BT630 requires careful installation of the shunt for accurate monitoring. Professional installation is recommended if you are unfamiliar with electrical systems.

1. Mount the Shunt: Choose a dry, secure location near the battery bank for mounting the shunt. Ensure good ventilation.
2. Pegatkeun sambungan batré: Before wiring, disconnect the negative terminal of your battery bank to prevent electrical hazards.
3. Wire the Shunt:
   • Connect the main negative cable from your battery bank to the 'BATTERY' terminal of the shunt.
   • Connect the main negative cable from your load/charger system to the 'LOAD' terminal of the shunt.
   • Connect the small positive wire from the BT630 unit to the positive terminal of your battery bank.
   • Connect the small negative wire from the BT630 unit to the 'BATTERY' terminal of the shunt (or a dedicated negative terminal on the shunt if available for the monitor).
4. Sambungkeun deui Batré: Once all wiring is secure, reconnect the main negative terminal of your battery bank.
5. Pamasangan & Pamasangan Aplikasi: Download the dedicated BMS app from your device's app store. Enable Bluetooth on your mobile device and pair with the BT630 monitor. Follow the in-app instructions for initial setup and calibration.

4. Parentah Operasi

4.1 Operating the FOXWELL BT705 Plus Car Battery Tester

1. Menu utama: After powering on, the main menu will appear. Use the 'MENU' and arrow buttons to navigate.
2. Select Test: Choose the desired test from options such as 'Battery Test', 'Cranking Test', 'Charging Test', 'Voltage Test', 'Ripple Analysis', 'Resistance Test', or 'Load Test'.
3. Turutan ajakan dina layar: The device provides step-by-step guidance for each test. For example, during a 'Cranking Test', it will prompt you to start the engine.
4. View Hasil: After the test is complete, the results will be displayed on the screen. Interpret the State of Health (SOH), State of Charge (SOC), and other relevant metrics.
5. Print/Save Results: If connected to a printer or computer (optional), you may be able to print or save test reports.

4.2 Operating the FOXWELL BT630 Bluetooth Battery Monitor

1. Ngajalankeun App: Open the dedicated BMS app on your paired mobile device.
2. Pangimeutan Real-Time: The app will display real-time battery metrics including SOC%, Voltage, Current, Remaining Capacity, Power, Temperature, Estimated Runtime, and Charge/Discharge History.
3. Data Graphs: View historical data and trends in clear graphical format to understand battery performance over time.
4. Tanda anu tiasa disaluyukeun: Set up alerts for various parameters such as over/under-voltage, overcurrent, overpower, and temperature extremes. The app can notify you when these thresholds are met.
5. Power Cutoff (Optional): If an external relay is integrated, the app can be configured to trigger a power cutoff based on predefined safety parameters.
6. Kalibrasi: The BT630 features dual-calibration precision. It uses an automatic error calibration system based on a long-term model database. Manual calibration for Voltage, Current, and Temperature can also be performed via the app for fine-tuning.

Image: The BT630 supports both automatic SOC calibration and manual calibration for Voltage, Current, and Temperature, allowing for precise adjustments.

5. Pangropéa

5.1 Perawatan Umum

• Keep both devices clean and dry. Use a soft, damp lawon pikeun ngusap beungeut. Entong nganggo pembersih atanapi pangleyur anu abrasif.
• Simpen alat-alat dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim nalika henteu dianggo.
• Hindarkeun ngaragragkeun atanapi matuhkeun alat-alatna kana dampak anu kuat.

5.2 BT705 Plus Maintenance

• Inspect the test clamps and cables regularly for any signs of damage, fraying, or corrosion. Replace if necessary.
• Ensure the display screen is free from scratches or cracks that could impair readability.

5.3 BT630 Maintenance

• Periodically check all wiring connections to the shunt and the BT630 unit to ensure they are secure and free from corrosion.
• Ensure the shunt's ventilation holes are clear of debris to maintain optimal thermal management.
• Keep the mobile app updated to the latest version for optimal performance and new features.

6. Cara ngungkulan

• Device Not Powering On (BT705 Plus): Pastikeun clamps are correctly and securely connected to the battery terminals. Check battery voltage; upami handap teuing, alat panginten moal tiasa dihurungkeun.
• Inaccurate Readings (BT630): Verify all shunt wiring connections are correct and tight. Perform a manual calibration via the app if automatic calibration does not resolve the issue. Ensure the app is updated.
• Bluetooth Connectivity Issues (BT630): Ensure Bluetooth is enabled on your mobile device. Restart both the BT630 (by temporarily disconnecting power) and your mobile device. Ensure the BT630 is within range.
• Test Failure/Error Message (BT705 Plus): Refer to the specific error code or message displayed on the screen. This often indicates an issue with the battery, connections, or test parameters. Recheck connections and battery condition.
• Proactive Monitoring: The BT630's visualized data graphs can help detect potential battery issues up to 30 days in advance by monitoring trends in current, voltage, and temperature. Regularly review these graphs to preempt failures.

7. Spésifikasi

8. Garansi jeung Rojongan

For warranty information, please refer to the documentation included with your product or visit the official FOXWELL websitus. Sarat jeung kaayaan jaminan bisa rupa-rupa dumasar wewengkon jeung produk.

For technical support, troubleshooting assistance, or further inquiries, please visit the official FOXWELL support page or contact their customer service directly. Contact details are typically available on the FOXWELL websitus.