KaiDi KDYJT006-20 Power Lift Recliner Actuator Motor Replacement Instruction Manual

Model: KDYJT006-20

1. Bubuka

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your KaiDi KDYJT006-20 Power Lift Recliner Actuator Motor. Please read this manual thoroughly before installation and retain it for future reference.

2. Émbaran Kasalametan

Always disconnect power to the recliner before attempting any installation, maintenance, or repair.
Ensure all connections are secure and correctly oriented to prevent electrical hazards.
Do not operate the actuator beyond its specified load capacity (Max Load 800N).
Avoid operating the actuator continuously beyond its rated duty cycle (2 minutes ON, 18 minutes OFF, 10%).
Use only the specified KD Power Supply.
Tetep leungeun jeung pakean leupas tina bagian nu gerak salila operasi.
Upami anjeun henteu yakin kana léngkah naon waé, konsultasi ka teknisi anu mumpuni.

3. Naon dina Box

1 x KaiDi KDYJT006-20 Power Lift Recliner Actuator Motor

Note: Power supply and remote control are typically sold separately or are part of the existing recliner system.

4. Setup jeung Instalasi

penting: Before proceeding, ensure the recliner is unplugged from the power outlet.

Identify the Old Actuator: Locate the existing actuator motor under your recliner. Note how it is mounted and connected.
Disconnect Power and Remote: Carefully disconnect the 2-pin round power connector and the 5-pin remote port connector from the old actuator.
Cabut Aktuator Lawas: Unbolt or unclip the old actuator from its mounting points on the recliner frame. Keep any mounting hardware.
Compare Actuators: Compare the new KaiDi KDYJT006-20 actuator with the old one. Verify that the stroke length (266mm) and mounting points are compatible.
Pasang Aktuator Anyar: Mount the new actuator into the recliner frame using the original hardware or suitable replacements. Ensure it is securely fastened.
Connect Power and Remote:
- Nyambungkeun 2-pin round power connector from your power supply to the corresponding port on the new actuator.
- Nyambungkeun 5-pin remote port connector from your hand control to the corresponding port on the new actuator.
Manajemén Kabel: Route all cables safely to prevent pinching or damage during recliner operation.

KaiDi KDYJT006-20 Actuator Motor with cables

Figure 1: KaiDi KDYJT006-20 Actuator Motor with its power and remote connectors. This image shows the overall appearance of the actuator and its wiring.

Close-up of KaiDi KDYJT006-20 Actuator Motor label

angka 2: Tutup-up view of the product label on the KaiDi KDYJT006-20 actuator, displaying model number, specifications, and safety warnings. Verify these details match your requirements.

Close-up of 5-pin remote connector and 2-pin power connector

Gambar 3: Detil view of the 5-pin remote control connector and the 2-pin round power connector. Ensure these match your existing recliner's connections.

5. Parentah Operasi

Daya Hurung: Once the actuator is securely installed and all connections are made, plug the recliner's power cord into a wall outlet.
Operasi tés: Use the recliner's hand control to slowly extend and retract the actuator. Observe for smooth movement and listen for any unusual noises.
Full Range of Motion: Test the recliner through its full range of motion to ensure the actuator operates correctly and does not bind or interfere with any parts of the recliner mechanism.
Siklus tugas: Remember the duty cycle of 2 minutes ON and 18 minutes OFF. Avoid continuous operation to prevent overheating and damage.

6. Pangropéa

Inspeksi rutin: Periodically inspect the actuator and its mounting points for any signs of wear, damage, or loose connections.
beberesih: Keep the actuator free from dust and debris. Wipe with a dry cloth. Do not use liquid cleaners directly on the motor or electrical components.
Lubrication: The actuator is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.
Cék kabel: Ensure all cables are intact and not frayed or pinched.

7. Cara ngungkulan

Masalah	Mungkin Cukang lantaranana	Solusi
Aktuator teu gerak.	Taya kakuatan pikeun recliner. Sambungan dayana leupas atanapi teu leres. Faulty hand control. Actuator motor failure.	Check if the recliner is plugged in and the outlet has power. Pariksa konektor kakuatan 2-pin geus aman napel. Test with a known working hand control if available. Contact customer support if motor failure is suspected.
Actuator moves slowly or with difficulty.	Overload on the recliner. Binding in the recliner mechanism. Vol handaptage tina catu daya.	Reduce weight on the recliner. Inspect the recliner mechanism for obstructions or damage. Ensure the power supply is providing adequate voltage (29V DC).
Noise mahiwal salila operasi.	Hardware dipasangan leupas. Internal actuator issue. Interference with recliner frame.	Check and tighten all mounting bolts. Inspect for any parts rubbing against the actuator. Upami aya sora anu terus-terusan, eureunkeun panggunaan sareng hubungi layanan palanggan.

8. Spésifikasi

Fitur	Rincian
Modél	KDYJT006-20
Panjang Stroke	266 mm
Laju	36 mm/s
Beban Max	800N
Dipeunteun Masukan Voltage	DC 29V
Sambungan Daya	2-pin round connector
Sambungan Jauh	5-pin port connector
Siklus tugas	2 minutes ON, 18 minutes OFF (10%)
Produsén	Kaidi

9. Garansi jeung Rojongan

For warranty information or technical support, please refer to the documentation provided with your original recliner or contact the retailer from whom you purchased this replacement actuator. Ensure you have your model number (KDYJT006-20) and purchase details available when contacting support.

For further assistance, you may visit the KaiDi Store on Amazon: KaiDi Store

	KAIDI KDDYM002A+ KDHM003A+ spésifikasi fungsi Dokumén ieu ngajéntrékeun spésifikasi fungsi pikeun sistem kontrol KAIDI KDDYM002A + sareng KDHM003A +, kalebet diagram sambungan sistem, fungsi kontrol leungeun, metode papasangan sareng unpairing, sareng catetan operasional anu penting.
	KDDYM002B + KDH144 Manual Fungsional: System Control Pesanggrahan Listrik Manual fungsional ieu nyadiakeun parentah lengkep pikeun sistem kontrol KAIDI KDDYM002B na KDH144, ngawengku spésifikasi, konfigurasi sistem, fungsi kontrol leungeun, papasangan, clearing, resets pabrik, sarta precautions pikeun aplikasi ranjang listrik.
	KDDY036-Y003 + KDH139-012 spésifikasi fungsi spésifikasi fungsi jeung parentah operasi pikeun sistem kotak kontrol KDDY036-Y003 + KDH139-012, detailing diagram sambungan, fungsi konci manual, métode papasangan, sarta tinimbangan kaamanan penting.
	KAIDI 19-Key Single Bed Control Box System Manual - KDH283C Comprehensive user manual for the KAIDI 19-Key Single Bed Single Control Box System (KDH283C). Learn about system setup, components, remote functions, performance specs, and safety guidelines.
	KAIDI KDDY036-Y003 + KDH139-012 Function Specification and User Manual User manual and function specification for the KAIDI KDDY036-Y003 and KDH139-012 control system by Changzhou Kaidi Electrical Co., Ltd. Details system connection, hand controller functions, pairing methods, and important operational notes.
	KDDY109C (B) + KDH281 Manual Fungsi pikeun Hiji Control jeung Genep Control Systems Manual ieu nyadiakeun parentah lengkep pikeun kotak kontrol KDDY109C(B) jeung KDH281 controller leungeun, ngawengku konfigurasi sistem, fungsi controller leungeun, papasangan, resets pabrik, sarta precautions pikeun pamakéan ku ranjang listrik.