Elitech Digital Manifold Gauge Set DMG-2SE Instruction Manual

Bubuka

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the Elitech Digital Manifold Gauge Set, model DMG-2SE. This device is designed for precise measurement of pressure and temperature in HVAC, refrigeration, and air conditioning systems. Please read this manual thoroughly before use to ensure proper functionality and safety.

Émbaran Kasalametan

Salawasna nganggo alat pelindung diri (APD) anu merenah, kalebet kacamata kaamanan sareng sarung tangan, nalika ngolah refrigeran.
Ensure all hose connections are secure and leak-free before applying pressure or vacuum to a system.
Do not exceed the maximum working pressure of the hoses (500 PSI) or the gauge (800 PSI). Exceeding these limits can cause equipment damage or personal injury.
Use the device in a well-ventilated area to prevent the accumulation of refrigerant vapors.
Refer to local and national regulations for proper refrigerant handling, recovery, and disposal procedures.
Keep the device away from moisture, direct sunlight, and extreme temperatures to prevent damage to electronic components.
Ulah nyobian ngabongkar atawa ngaropéa alat. Rujuk sadayana jasa ka tanaga anu mumpuni.

Produk Leuwihview jeung Komponén

The Elitech DMG-2SE is a digital manifold gauge designed for HVAC/R professionals, offering accurate pressure and temperature measurements. It features a high-definition LCD screen, intuitive controls, and robust construction for reliable performance.

Elitech Digital Manifold Gauge Set DMG-2SE with refrigerant hoses — *Figure 1: Elitech Digital Manifold Gauge Set DMG-2SE with included refrigerant charging hoses.*

Key features of Elitech DMG-2SE including 88 refrigerant types, real-time pressure, multi-unit toggle, observation window, refrigerant charge/recovery, 1% accuracy, rugged design, and 200H battery life. — Gambar 2: Leuwihview of key features including support for 88 refrigerant types, real-time pressure and saturation temperature display, multi-unit toggle, observation window, refrigerant charge/recovery functions, ±1% accuracy, rugged design, and 200-hour battery life.

Diagram of Elitech DMG-2SE showing LCD display, control buttons, valve knobs, refrigerant hose connection ports, sight glass, battery compartment, information label, and hanging mount. — Figure 3: Labeled diagram of the DMG-2SE showing the LCD display, control buttons, valve knobs, refrigerant hose connection ports (1/4" SAE), sight glass, battery compartment, information label, and hanging mount.

Hoses Refrigerant

The included refrigerant charging hoses are color-coded for easy identification and proper connection.

Three refrigerant charging hoses in red, yellow, and blue, each 59 inches long with 1/4 inch SAE screw threads. — *Figure 4: The included 59-inch (1.5m) refrigerant charging hoses with 1/4" SAE screw threads.*

Close-up of refrigerant hose connections, indicating red for high pressure, blue for low pressure, and yellow for refrigerant. — *Figure 5: Color coding for refrigerant hoses: Red for high pressure, Blue for low pressure, and Yellow for refrigerant.*

spésifikasi

Rentang tekanan: -14 nepi ka 800 psi
Akurasi: ±1% FS (Full Scale)
Resolusi: 1 psi
Unit tekanan: psi, kg/cm², kPa, MPa, bar, inHg
Unit Suhu: ° C / ° F
Refrigerants cocog: Supports 88 types (e.g., R11, R12, R22, R134a, R410a, R404a, R407c, R507, R32, R290, R600a, R1234yf, etc.). The device defaults to 18 types and can be updated via an app.
Panjang selang: 59 inci (1.5m)
Sambungan selang: 1/4" SAE
Hose Working Pressure: 500 PSI (Yellow, Blue, Red)
Hose Burst Pressure: 4000 PSI (Yellow, Blue, Red)
kakuatan: 2 x AAA batteries (replaceable)
Kahirupan batré: Kurang leuwih 200 jam
ukuran: Approximately 4.3 inches (11 cm) width, 5.3 inches (13.5 cm) height, 2.9 inches (7.4 cm) depth.
beurat: Kira-kira 1.5 lbs (680g)

Disetél

Pamasangan batré: Open the battery compartment located on the back of the unit. Insert two AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
Daya mimiti Hurung: Pencét tombol kakuatan (U symbol) to turn on the device. The LCD screen will illuminate.
Pilihan Unit: Use the "MODE" button to cycle through available measurement units (psi, kg/cm², kPa, MPa, bar, inHg for pressure; °C/°F for temperature). Select your preferred units by stopping on the desired option.
Refrigerant Selection: Press the "MODE" button repeatedly until the refrigerant type (e.g., R134a) flashes on the display. Use the up/down arrow buttons to scroll through the list of supported refrigerants. Confirm your selection by pressing "MODE" again or by waiting a few seconds for the selection to auto-confirm.
Zeroing the Pressure: Before connecting the gauge to any system, ensure it is at atmospheric pressure (not connected to any pressure source). Press the "ZERO" button to calibrate the pressure reading to zero. This ensures accurate measurements.

Parentah Operasi

Nyambungkeun hoses

Nyambungkeun selang biru to the low-pressure service port of the HVAC/R system.
Nyambungkeun selang beureum to the high-pressure service port of the HVAC/R system.
Nyambungkeun selang konéng to the service port of your vacuum pump, refrigerant tank, or recovery machine.
Ensure all connections are hand-tightened, then slightly snugged with a wrench to prevent refrigerant leaks.

Ngukur Tekanan sareng Suhu

With the hoses connected to the system, slowly open the appropriate valve knobs on the manifold gauge to allow system pressure to reach the internal sensors.
The LCD will display real-time pressure readings for both the high and low sides of the system.
Simultaneously, the display will show the corresponding saturation temperatures (evaporation and condensation temperatures) for the currently selected refrigerant.
The "PT" (Pressure-Temperature) mode shows pressure and saturation temperature. "Ev" (Evaporation) and "Co" (Condensation) indicate the saturation temperatures, while "PL" (Low Pressure) and "PH" (High Pressure) indicate the actual system pressures.

Close-up of the Elitech DMG-2SE digital display showing pressure and temperature readings for R134a refrigerant. — *Gambar 6: Kelample of the digital display showing pressure and saturation temperature readings.*

Refrigerant Charging/Recovery

The DMG-2SE provides accurate pressure readings essential for refrigerant charging and recovery processes. Always follow industry best practices and local regulations for these operations.

Pikeun Ngecas: Connect the yellow hose to the refrigerant tank. Purge any air from the yellow hose before opening the manifold valve to the system. Monitor the pressure readings on the DMG-2SE to ensure the correct charge is added.
For Recovery: Connect the yellow hose to a certified refrigerant recovery machine. Follow the recovery unit's instructions and monitor system pressures on the DMG-2SE during the recovery process.

Pangropéa

beberesih: Ngusap alat ku lemes, damp lawon. Ulah make cleaners abrasive, pangleyur, atawa neuleumkeun unit dina cai.
Ngagantian batré: Replace batteries when the low battery indicator appears on the display. Ensure the device is powered off before opening the battery compartment and replacing the two AAA batteries.
Inspeksi selang: Regularly inspect all refrigerant hoses for signs of wear, cracks, cuts, or damage. Replace damaged hoses immediately to prevent refrigerant leaks and ensure safety.
Panyimpenan: Store the manifold gauge set in a clean, dry place, away from direct sunlight, extreme temperatures, and corrosive environments.

Pamérésan masalah

Masalah	Mungkin Cukang lantaranana	Solusi
Alat teu hurung	Batré paéh atawa salah dipasang	Ganti batré, mastikeun polaritasna bener.
bacaan tekanan teu akurat	Gauge not zeroed; Leaking connections; Incorrect refrigerant selected	Zero the gauge before use. Check all hose connections for leaks. Verify the correct refrigerant type is selected.
Layar nunjukkeun "Err"	Sensor error or measurement out of range	Power off and restart the device. If the error persists, contact customer support.

Garansi sareng Rojongan

For detailed warranty information, technical support, or service inquiries regarding your Elitech Digital Manifold Gauge Set DMG-2SE, please contact Elitech customer service. Refer to the product packaging or the official Elitech websitus pikeun detil kontak sareng sumber pangrojong panganyarna.

Elitech Websitus: www.elitech.com

	Elitech MS-100 PLUS Smart Digital Manifold Gauge User Manual Comprehensive user manual for the Elitech MS-100 PLUS Smart Digital Manifold Gauge, covering product introduction, safety instructions, overview, button functions, technical parameters, and quick operation guides for refrigeration and HVAC systems.
	Elitech MS-100 Digital Manifold Gauge: Features, Operation, and Specifications Comprehensive guide to the Elitech MS-100 Digital Manifold Gauge, covering its features, quick operation, technical specifications, precautions, and product details for HVAC and refrigeration systems.
	Elitech MS-800 Series Digital Manifold Gauge User Manual & Specifications Comprehensive user manual for the Elitech MS-800 Series digital manifold instrument, covering product introduction, safety guidelines, environmental protection, detailed specifications, and quick operation guides for pressure and temperature measurements, hold pressure tests, and refrigerant charging for HVAC and refrigeration systems.
	Elitech MS Series Digital Manifold Gauge User Manual User manual for the Elitech MS Series digital manifold gauge, covering product description, general overview, button functions, specifications, quick start guide, operation steps, intelligent applications, and maintenance.
	Elitech MS-100 Digital Manifold Gauge Manual Pamaké Manual pamaké pikeun Elitech MS-100 Digital Manifold Gauge, detailing fitur, operasi, spésifikasi, sarta perawatan.
	Elitech MS-100 Digital Manifold: Manual pamaké sarta spésifikasi Pituduh komprehensif pikeun manifold digital Elitech MS-100, ngawengku fitur, spésifikasi téknis, operasi, parentah kaamanan, jeung ngungkulan. Diajar kumaha ngagunakeun alat pikeun pangukuran tekanan sareng suhu, tés bocor, prosés vakum, sareng logging data nganggo aplikasi Elitech Tools.

Elitech DMG-2SE