PetJoy 3 Dog Shock Collar User Manual

Bubuka

The PetJoy 3 Dog Shock Collar system is designed to assist in training up to three dogs simultaneously or individually. It features both automatic bark detection and remote-controlled training modes, including beep, vibration, and static stimulation. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure effective and safe use of the device.

Émbaran Kasalametan

• This device is intended for training purposes only. Do not use it as a punishment tool.
• Not suitable for aggressive dogs. Consult a professional dog trainer if your dog exhibits aggressive behavior.
• Ulah ngantepkeun kalung dina anjing anjeun langkung ti 12 jam per dinten pikeun nyegah iritasi kulit.
• Regularly check your dog's neck for signs of irritation or sores. If irritation occurs, discontinue use until the skin heals.
• Jauhkeun tina jangkauan barudak.
• Ensure proper fit; the collar should be snug but not overly tight.
• Always start with the lowest stimulation level and gradually increase as needed.

Eusi pakét

Punten parios yén sadaya barang anu didaptarkeun di handap kalebet kana pakét anjeun:

• 3 x Tali Kerah
• 1 x Clicker
• 3 x Shock Collar Receivers
• 1 x Kadali Jauh
• 2 x Charging Wires
• 1 x Lanyard

Image: All components included in the PetJoy 3 Dog Shock Collar package.

Produk Leuwihview

Familiarize yourself with the main components of your PetJoy training system.

Image: The PetJoy 3 Dog Shock Collar system, including three receiver collars and the remote control.

Kadali jauh

• Layar tampilan: Shows battery level, selected dog channel, mode, and intensity level.
• Tombol Mode: Separate buttons for Beep, Vibration, and Static Stimulation.
• +/- Tombol: Adjust intensity levels for Vibration and Static Stimulation.
• Tombol Saluran: Switch between dog channels (1, 2, 3) or control all simultaneously.
• Tombol Daya: Turns the remote on/off and activates/deactivates Auto Mode on the receiver.

Kerah panarima

• Titik Kontak: Deliver static stimulation. Ensure proper contact with the dog's skin.
• Auto Mode Sensor Hole: Detects barking for automatic correction.
• Port ngecas: For recharging the receiver battery.
• Indikator LED: Shows power status, charging status, and mode activation.

Guide Setup

1. Ngecas Alat

Before first use, fully charge the remote control and all receiver collars. Use the provided charging cables.

• Connect the charging cable to the charging port on the remote and receivers.
• Plug the USB end into a USB power adapter (not included), computer, or power bank.
• The LED indicator on the receiver will show charging status (e.g., red while charging, green when full). The remote display will show battery icon filling up.
• Charging typically takes 2-3 hours. A full charge provides approximately 90 days of work time for the remote and 30 days for receivers.

Image: Charging the remote and receiver collars.

2. Pairing the Remote and Collars

Each receiver collar needs to be paired with the remote control.

1. Hurungkeun kadali jauh.
2. Select the desired channel (1, 2, or 3) for the collar you are pairing using the Channel button.
3. With the receiver collar turned off, press and hold its power button until the LED indicator flashes rapidly.
4. While the receiver LED is flashing, press any mode button (Beep, Vibration, or Shock) on the remote control.
5. If pairing is successful, the receiver LED will stop flashing and remain solid, and the remote will confirm the connection.
6. Repeat for additional collars, selecting a different channel for each.

3. Nyocogkeun Kerah

Proper fit is crucial for effective and safe operation.

• Position the receiver on the underside of your dog's neck, directly below the chin.
• Ensure the contact points touch your dog's skin. You may need to trim long fur for better contact.
• Adjust the strap so it is snug, allowing only one finger to fit comfortably between the strap and your dog's neck.
• The collar should not be too loose, as this can cause inconsistent stimulation and rubbing. It should not be too tight, as this can restrict breathing or cause discomfort.

Parentah Operasi

Modeu Latihan

The PetJoy collar offers four training modes:

• Modeu bip: Delivers an audible tone. This is often used as a warning or positive reinforcement signal.
• Modeu Geter: Delivers a non-harmful vibration. Intensity is adjustable from 1-100 levels.
• Modeu shock: Delivers a static stimulation. Intensity is adjustable from 1-100 levels. Always start at the lowest level and increase gradually.
• Modeu Otomatis: The collar automatically detects and corrects barking. It has 5 sensitivity levels and a sequence of corrections (Beep, then Vibration, then Static Stimulation) if barking persists.

Image: Detailed activation sequences for the automatic bark detection mode.

Image: The collar's ability to operate in Auto Mode independently.

Controlling Multiple Dogs

The remote allows you to control up to three collars individually or all at once.

• Ngagunakeun éta Tombol saluran on the remote to switch between Dog 1, Dog 2, Dog 3, or a universal channel to control all paired collars simultaneously.
• Ensure each collar is paired to a unique channel for individual control.

Image: Controlling multiple dogs with the remote.

Adjusting Sensitivity (Auto Mode)

To adjust the sensitivity of the automatic bark detection mode:

• With the receiver collar turned on, quickly press its power button 3 times.
• The LED indicator will flash a certain number of times to indicate the current sensitivity level (1-5 flashes).
• Continue pressing the power button 3 times in quick succession to cycle through the 5 sensitivity levels. Level 1 is the least sensitive, and Level 5 is the most sensitive.
• Select a sensitivity level appropriate for your dog's barking habits and environment.

Activating/Deactivating Auto Mode

You can turn the automatic bark detection mode on or off via the remote control.

• Ensure the remote and receiver are paired and within range.
• Press and hold the remote control's power button.
• You will hear the receiver beep once to confirm Auto Mode is turned ON, or twice to confirm it is turned OFF.

Pangropéa

beberesih

• Rutin ngabersihan kerah panarima sareng titik kontak sareng iklanamp lawon.
• Ensure the contact points are free of dirt, debris, or corrosion.
• Entong nganggo bahan kimia kasar atanapi beberesih kasar.

Perawatan batré

• Charge the devices fully before long periods of inactivity.
• Simpen dina tempat anu tiis, garing.
• Hindari suhu anu ekstrim, anu tiasa mangaruhan umur batré.

Waterproofing

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for use in rainy conditions or during swimming.

Image: The collar's IPX7 waterproof capability.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

The PetJoy 3 Dog Shock Collar comes with a 2-Taun Garansi ti tanggal dibeuli, ngawengku defects manufaktur sarta malfunctions dina pamakéan normal.

For detailed warranty information, technical support, or any inquiries, please refer to the official user guide or contact PetJoy customer service.

Pituduh Pamaké Resmi (PDF): Unduh Di dieu

PetJoy Brand Store: Nganjang ka Toko