1. Bubuka
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. Naon dina Box
- 1x Dimmer Light Switch
- 1x Wall Plate
- 4x Kawat Kacangan
- 2x Screws Panjang
- 2x Screws pondok
- 1x Manual Pamaké (dokumén ieu)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. Spésifikasi
| Fitur | Rincian |
|---|---|
| Modeu Operasi | HIRUP |
| Peunteun ayeuna | 3 Amps |
| Operasi Voltage | 125 volt |
| Alat nu cocog | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| Tipe Kontrol | Tombol Push Manual |
| Protokol konektipitas | N.A (No WiFi) |
| Ukuran (L x W x H) | 4.49 x 2.76 x 1.34 inci |
| Item Beurat | 5 ons |
| Warna | Bodas |
Image: Product dimensions of the dimmer switch.
4. Pamasangan
penting: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- Pareuman Daya: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltage panguji.
- Hapus Switch Old: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
- Identipikasi Kawat: Identify the following wires in your electrical box:
- Line Wire: Ngabawa daya tina pemutus sirkuit.
- Kawat beban: Disambungkeun kana lampu.
- Kawat nétral: Typically white, required for this dimmer switch.
- Kawat taneuh: Tambaga bulistir atawa héjo.
- Pasangkeun Saklar Dimmer: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- Dimmer Pindah Kawat Bodas to Wall Box Kawat Netral
- Dimmer Pindah Kawat Hideung to Wall Box Power Supply's Line (Live)
- Dimmer Pindah Kawat Beureum to Wall Box Beban Kawat
- Dimmer Pindah Kawat Héjo to Wall Box Lemah Kawat
- Pasang saklar: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- Pasang Plat Tembok: Attach the new wall plate over the dimmer switch.
- Mulangkeun Daya: Hurungkeun deui kakuatan dina circuit breaker.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. Operasi
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
Paké munggaran
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
Kadali Langkungview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- Tombol Daya: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- adjustment alus: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- adjustment alus: Press and hold to gradually decrease brightness by 1% each time. - Lampu Indikator: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
Fungsi mémori
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. Kasaluyuan
This dimmer switch is compatible with various dimmable light sources:
- Dimmable LED: 3-150W, 125V/60Hz
- Dimmable CFL: 3-150W, 125V/60Hz
- Pijar Lamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp jeung LED lamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.
