LOFREE Flow2 Low-Profile Manual pamaké keyboard mékanis

Bubuka

This manual provides comprehensive instructions for setting up, operating, and maintaining your LOFREE Flow2 Low-Profile Mechanical Keyboard. Please read this guide thoroughly before use to ensure optimal performance and longevity of your device.

Naon dina Box

• LOFREE Flow2 Mechanical Keyboard (100 Keys)
• 1.5m Kabel USB-C
• 2.4GHz panarima
• 4 Replacement Keycaps (Windows/macOS specific)
• Pituduh Pamaké (manual ieu)

Image: Contents of the LOFREE Flow2 keyboard package.

Disetél

1. Power and Connection Mode Switch

Locate the power and connection mode switch on the underside of the keyboard, behind the flip-out feet. This switch allows you to select between Wired, Bluetooth (BT), and 2.4GHz wireless modes.

Gambar: Underside view of the keyboard with the mode switch.

2. Sambungan kabel

To use the keyboard in wired mode, slide the switch to the 'Wired' position. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to your computer.

3. 2.4GHz Wireless Connection

For 2.4GHz wireless mode, slide the switch to the '2.4G' position. Insert the 2.4GHz USB receiver into an available USB port on your computer. The keyboard should connect automatically. If not, press fn+4 (for 84/100-key models) or Fn + Urang Sunda (for 68-key models) to activate it.

Image: The keyboard highlighting its 1000Hz polling rate in wired and 2.4GHz modes.

4. Sambungan Bluetooth

To connect via Bluetooth, slide the switch to the 'BT' position. On your computer or device, enable Bluetooth and search for available devices. Select 'LOFREE Flow2' from the list. To pair, press Fn + 1/2/3 (for 84/100-key models) or Fn + Q/W/E (for 68-key models) to select a Bluetooth channel.

5. Saklar Kompatibilitas Sistem

The keyboard supports both Windows/Android and macOS/iOS systems. To switch between input systems, hold down Fn + N for Windows/Android or fn+m for macOS/iOS. The keyboard comes with interchangeable keycaps for Windows and macOS layouts.

Image: Included Windows and macOS keycaps for system compatibility.

Parentah Operasi

1. Side Touch Bar Functions

The LOFREE Flow2 features a side touch bar for quick adjustments. Swipe up or down on the touch bar to control volume. Hold the Fn key and swipe up or down to adjust screen brightness. To lock the touch bar and prevent accidental touches, press and hold Fn + Spasi salila kurang leuwih 3 detik.

Image: The side touch bar for volume, brightness, and lock functions.

2. Setélan lampu tukang

Adjust the keyboard backlight by holding the Fn kenop jeung pencét éta Panah Kénca or Panah katuhu keys. There are three lighting modes: Steady On, Breathing, and Off.

3. Key Switches and Keycaps

The LOFREE Flow2 uses Cloud Switch Series low-profile mechanical switches. These switches are hot-swappable, allowing for customization. To remove keycaps, use the included keycap puller. For larger keycaps like the spacebar, pull from both sides separately to prevent stabilizer damage. To remove switches, use the included switch puller, aligning it with the switch clips and gently wiggling it upward.

Gambar: Ngabeledug view and specifications of the Surfer Linear switch.

4. QMK/VIA Compatibility

The keyboard supports QMK/VIA for advanced customization of key remapping, macros, and shortcuts. Refer to the official LOFREE website for detailed instructions on using QMK/VIA software.

Image: QMK/VIA software interface for keyboard customization.

Pangropéa

• beberesih: Use a soft, dry cloth to clean the keyboard surface. For deeper cleaning, remove keycaps and use compressed air to clear debris.
• Batré: The keyboard features a 3000mAh battery. Recharge via the USB-C cable when the battery indicator shows low power. Avoid extreme temperatures.
• Panyimpenan: Store the keyboard in a cool, dry place away from direct sunlight and excessive moisture.

Pamérésan masalah

• Keyboard teu ngabales: Ensure the power switch is on and the correct connection mode (Wired, 2.4G, or BT) is selected. For wireless modes, check battery level.
• Masalah papasangan Bluetooth: Ensure the keyboard is in Bluetooth mode and your device's Bluetooth is enabled. Try selecting a different Bluetooth channel (Fn + 1/2/3 or Fn + Q/W/E) and re-pairing.
• Konci henteu ngadaptar: Check if the keycaps are properly seated. If using hot-swappable switches, ensure they are fully inserted.
• Lampu tukang teu jalan: Adjust backlight settings using Fn + Panah Kénca/Katuhu keys. Ensure the keyboard is powered on.

spésifikasi

Garansi sareng Rojongan

For warranty information, technical support, or further assistance, please visit the official LOFREE website or contact LOFREE customer service. Keep your purchase receipt for warranty claims.

Official LOFREE Store: LOFREE Store on Amazon

Video Produk Resmi