1. Bubuka
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop. This advanced cleaning device combines powerful vacuuming with professional mopping, intelligent navigation, and a convenient self-emptying and mop-cleaning station.
Punten baca manual ieu sacara saksama sateuacan nganggo produk sareng tahan pikeun rujukan ka hareup.
2. Komponén produk
The Cecotec Conga Z100 X-Treme package includes the following items:
- Robot Vacuum and Mop Unit
- Self-Emptying and Mop Cleaning Station
- Adaptor kakuatan
- Sikat Samping (2 unit)
- Main Brush (silicone)
- Bimaterial Mop Pad
- Disposable Dust Bag (pre-installed in station)
- Clean Water Tank (in station)
- Dirty Water Tank (in station)
- Manual pangguna (dokumén ieu)
3. Setélan
3.1 Ngabongkar jeung Persiapan
- Sacara saksama miceun sadaya komponén tina bungkusan.
- Remove any protective films, stickers, or foam inserts from the robot and the station.
- Pastikeun sadaya komponén anu didaptarkeun dina Bagian 2 aya sareng henteu ruksak.
3.2 Placing the Self-Emptying and Mop Cleaning Station
- Place the station on a hard, level surface against a wall.
- Ensure there is at least 1 meter (3 feet) of clear space in front of the station and 0.5 meters (1.5 feet) on either side to allow the robot to dock properly.
- Keep the station away from direct sunlight, heat sources, and areas with high humidity.
- Plug the power adapter into the station and then into a wall outlet.
3.3 Ngeusian Tangki Cai Beresih
- Open the lid of the clean water tank on the station.
- Fill the tank with clean tap water up to the MAX line. Do not use detergents or cleaning solutions not approved by Cecotec.
- Close the tank lid securely.
3.4 Masang Sikat Sikat
- Hurungkeun robot tibalik ka handap.
- Align the side brushes with the corresponding posts (L for left, R for right) and press them down until they click into place.
3.5 Ngecas Awal
- Place the robot onto the charging contacts of the station. Ensure the charging contacts on both the robot and the station are aligned.
- Robot bakal mimiti ngecas sacara otomatis. Keunkeun nepi ka pinuh ngecas sateuacan dianggo pikeun anu munggaran (sakitar 4-6 jam).
3.6 Mobile Application Connection
- Download the official Cecotec Conga app from your smartphone's app store.
- Follow the in-app instructions to register an account and connect your Conga Z100 X-Treme robot. This typically involves connecting to the robot's Wi-Fi network during the setup process.
4. Parentah Operasi
4.1 Powering on / Pareum
- Daya Hurung: Press and hold the power button on the robot until the indicator lights illuminate.
- Pareum listrik: Pencét terus tahan tombol daya nepi ka lampu indikator pareum.
4.2 Ngamimitian siklus beberesih
- Ensure the robot is fully charged and the clean water tank is filled (for mopping).
- Press the clean button on the robot or use the mobile app to start a cleaning cycle. The robot will automatically leave the station and begin cleaning.
- To pause cleaning, press the clean button once. Press again to resume.
- To send the robot back to the station, press the home button on the robot or use the app.
4.3 Modeu beberesih
The robot offers various cleaning modes accessible via the mobile application:
- Modeu Otomatis: Robot intelligently cleans sakabéh wewengkon dipetakeun.
- Modeu titik: Cleans a specific small area with concentrated effort.
- Modeu tepi: Cleans sapanjang tembok jeung edges jati.
- Ngabersihan Zona: Ngidinan anjeun pikeun nangtukeun daérah khusus dina peta pikeun dibersihkeun.
4.4 AI Navigation and Obstacle Avoidance
The Conga Z100 X-Treme utilizes AI with LaserEye technology for precise navigation. It identifies small objects, different floor types, and dirt levels, adapting its cleaning strategy accordingly. This allows it to navigate complex environments and avoid obstacles effectively.
4.5 AquaCycle Professional Mopping
The AquaCycle system ensures continuous mopping with clean water. The robot wets the bimaterial mop with clean water and wrings out dirty water into a separate tank, providing efficient and hygienic floor cleaning.
4.6 Wet&Protect Technology
The robot's intelligent mopping adapts to different surfaces. Its bimaterial mop provides deep cleaning with a super-absorbent side. When a carpet is detected, the robot activates CarpetCare mode and uses the smooth side of the mop to protect the carpet from moisture.
4.7 Daya nyeuseup
With an Ungravity motor providing 20000 Pa of suction power, the robot effectively cleans hidden dirt, even from high-pile carpets and deep tile grout.
5. Pangropéa
Pangropéa rutin mastikeun kinerja anu optimal sareng manjangkeun umur robot vakum sareng pel anjeun.
5.1 Self-Emptying Station Maintenance
- Ngaganti Kantong Debu: The station automatically empties the robot's dust bin into a disposable dust bag. Replace the dust bag when the indicator light on the station signals it is full (approximately every 12 weeks, depending on usage).
- Tangki cai bersih: Refill with clean water before each mopping cycle.
- Tangki Cai Kotor: Empty and rinse the dirty water tank after each mopping cycle to prevent odors and bacterial growth.
- Pangeringan: The station dries the mop with hot air after cleaning. Ensure the mop is properly positioned for effective drying.
5.2 Robot Components Cleaning
- Sikat utama: Regularly remove hair and debris from the main silicone brush. Use the cleaning tool provided.
- Sikat samping: Check for tangled hair or debris and clean as needed. Replace if worn or damaged.
- Bimaterial Mop Pad: Remove the mop pad after each mopping cycle and wash it thoroughly. It can be hand-washed or machine-washed (follow care instructions).
- Sénsor: Wipe the cliff sensors, wall sensors, and charging contacts with a clean, dry cloth to ensure proper function.
- Roda: Clean any hair or debris from the robot's wheels.
6. Cara ngungkulan
If you encounter issues with your Conga Z100 X-Treme, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Robot teu hurung. | Batré lemah; tombol daya teu dipencet kalawan bener. | Place robot on charging station; press and hold power button for 3 seconds. |
| Robot teu tiasa mendakan stasiun ngecas. | Station obstructed; robot too far from station. | Ensure clear space around station; manually place robot closer to station. |
| Kinerja beberesih goréng. | Brushes or filters dirty/worn; dust bin full. | Clean/replace brushes and filters; empty dust bin. |
| Robot sering macét. | Obstacles (cables, small objects); uneven surfaces. | Clear the cleaning area of obstacles; use virtual walls/no-go zones in app. |
| Masalah konektipitas aplikasi. | Incorrect Wi-Fi password; router too far; app outdated. | Verify Wi-Fi credentials; move robot closer to router; update app; reset robot's Wi-Fi. |
| Mopping daun corétan atanapi henteu efektif. | Mop pad dirty/worn; clean water tank empty; dirty water tank full. | Clean/replace mop pad; refill clean water tank; empty dirty water tank. |
| Kasalahan pompa cai. | Pump malfunction; blockage in water lines. | Check for blockages; contact customer support if issue persists. |
For persistent issues not covered here, please refer to the official Cecotec support channels.
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Cecotec |
| Ngaran modél | Conga Z100 X-Treme |
| Nomer modél | A01_EU01_119672 |
| Daya nyeuseup | 20000 Pa |
| Kapasitas batré | 5200 mAh |
| Téhnologi Napigasi | AI with LaserEye |
| Sistem Mopping | AquaCycle Professional Mopping, Wet&Protect Technology, Bimaterial XXL Mop |
| Stasion Ngosongkeun Mandiri | Yes, with hot air mop drying |
| Kapasitas Kantong lebu | 3 liter |
| Kapasitas Tangki Cai Bersih | 3 liter |
| Kapasitas Tangki Cai kotor | 3 liter |
| Ukuran Robot (L x W x H) | 35.2 x 35.2 x 10.5 cm |
| Robot Beurat | 4.92 kg |
| Voltage | 240 volt |
| Tipe Kontrol | Kontrol Aplikasi |
8. Garansi jeung Rojongan
Your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or to inquire about replacement parts and consumables, please contact Cecotec customer service through their official websitus atanapi inpormasi kontak anu disayogikeun dina dokuméntasi jaminan anjeun.
Always ensure you have your product model number (A01_EU01_119672) and proof of purchase available when contacting support.
