THINKCAR THINKSCAN 662 OBD2 Scanner User Manual

1. Bubuka

The THINKCAR THINKSCAN 662 is an advanced OBD2 diagnostic scanner designed for comprehensive vehicle system analysis. This tool supports diagnostics for Engine, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS), and Transmission systems. It features full bi-directional control capabilities and offers lifetime free software updates to ensure compatibility with the latest vehicle models and diagnostic functions.

fitur konci ngawengku:

• 4-Diagnostik Sistem: Covers Engine, ABS, SRS, and Transmission.
• 12 Fungsi Reset: Includes ABS Bleeding, Airbag Reset, Battery Matching, Brake-pad Reset, DPF Regeneration, Electronics Throttle Adaption, Gearbox Learning, Anti-theft/Key Matching, Injector Coding, Oil Reset, Steering Angle Reset, and TPMS Reset.
• CAN FD & FCA SGW Support: Ensures compatibility with modern vehicle communication protocols.
• Pembaruan Gratis Saumur hirup: Provides continuous software enhancements and vehicle coverage.
• Kontrol dua arah: Allows the tool to send commands to vehicle systems for active testing.

2. Setélan

Follow these steps to set up your THINKCAR THINKSCAN 662 OBD2 Scanner:

1. Unboxing: Carefully remove the THINKSCAN 662 device, the OBD2 diagnostic cable, and the USB charging cable from the packaging.
2. Powering Alat: The device is corded and charges directly from the vehicle's OBD2 port. Connect the diagnostic cable to the 9-pin serial connector port located at the top of the THINKSCAN 662 device.
3. Nyambung ka Kendaraan: Locate your vehicle's OBD2 port (typically under the dashboard on the driver's side). Plug the other end of the diagnostic cable into the vehicle's OBD2 port. Ensure the vehicle's ignition is in the 'ON' position (engine can be off or running, depending on the diagnostic task).
4. Boot-up mimiti: The device will power on automatically once connected to the vehicle. If not, press the power button located on the top right side of the device.
5. Ngecas: The device charges via the OBD2 port when connected to a vehicle. A separate USB charging cable is provided for software updates or if external charging is required. The device also features a USB port and an SD card slot on the side for data transfer and storage.

Gambar 1: The THINKCAR THINKSCAN 662 OBD2 Scanner showing its main unit, diagnostic cable, and key feature icons.

3. Parentah Operasi

The THINKSCAN 662 features a 6.2-inch touchscreen display for intuitive navigation. Use the touchscreen or the physical buttons on the right side of the device to interact with the menus.

3.1. Napigasi Menu Utama

The main menu provides access to various functions:

• Diagnosis: Initiates vehicle diagnostics.
• Pangropéa: Accesses special reset and service functions.
• Ningkatkeun: For software updates.
• Tambih deui: Contains additional tools and settings.

3.2. Diagnostik Kandaraan

To perform a vehicle diagnostic scan:

1. Tina ménu utama, pilih Diagnosis.
2. Milih Pilarian Otomatis to automatically identify the vehicle's VIN, make, model, and year for quick access to diagnostics. Alternatively, select Diagnosis for manual vehicle selection or OBD for standard OBD2 functions.
3. After vehicle identification, you can select from options like Laporan Kaséhatan, Sistem Scan, atawa Pamilihan Sistim.
4. A Laporan Kaséhatan or Sistem Scan will quickly communicate with available modules (e.g., Engine Control Module (ECM), Transmission Control Module (TCM), Electronic Brake Control Module (EBCM), Inflatable Restraint Sensing And Diagnostic Module (IRSDM)) to check for Diagnostic Trouble Codes (DTCs).
5. Ka view live data, navigate to the Modul Kontrol Mesin (ECM) or other relevant module, then select Baca Data Stream. You can select specific data parameters (PIDs) to monitor. The device supports displaying up to four data streams simultaneously in a graphical format. You can switch between Metric and Imperial units.
6. For active testing, select Tés aktuasi within a module. This allows you to send commands to specific components (e.g., Air Conditioning (A/C) Compressor Clutch Relay, Cooling Fan, Fuel System) to verify their functionality.

4. Maintenance and Special Functions

The THINKSCAN 662 offers 12 specialized maintenance functions to assist with common service tasks:

• Perdarahan ABS: Used to push air out of the ABS pump after brake system work.
• Airbag Reset (SRS): Resets the Supplemental Restraint System after repairs.
• Cocogkeun Batré (BMS): Registers a new battery with the vehicle's battery management system.
• Brake-pad Reset (EPB): Retracts electronic parking brake calipers for pad replacement.
• DPF Regeneration (DPF): Ngamimitian prosés regenerasi Filter Partikulat Diesel.
• Electronics Throttle Adaption (ETS): Performs a relearn procedure for the electronic throttle body.
• Gearbox Learning (GEARBOX): Nyaluyukeun unit kontrol transmisi saatos perbaikan atanapi panggantian.
• Anti-theft/Key Matching (IMMO): Programs new keys or immobilizer components.
• Injector Coding (INJEC): Codes new injector values into the engine control unit.
• Oil Reset (OIL): Reset lampu servis oli saatos ganti oli.
• Steering Angle Reset (SAS): Calibrates sensor sudut steering.
• TPMS Reset (TPMS): Ngareset Sistem Pemantauan Tekanan Ban saatos rotasi ban atanapi ngaganti sénsor.

5. Cara ngungkulan

If you encounter issues with your THINKSCAN 662, consider the following:

• Alat Teu Dihurungkeun: Ensure the diagnostic cable is securely connected to both the device and the vehicle's OBD2 port. Verify the vehicle's ignition is on. The device draws power from the OBD2 port.
• Kasalahan Komunikasi: Check all cable connections. Ensure the vehicle's ignition is in the correct position. Try a different vehicle to rule out a vehicle-specific issue.
• Masalah parangkat lunak: Mangpaatkeun Ningkatkeun function to ensure your device has the latest software. Lifetime free updates are available.
• Bacaan/Fungsi Anu Salah: Confirm the correct vehicle information (VIN, make, model, year) has been automatically or manually selected.
• Fault Code Library: Ngagunakeun éta Perpustakaan Kode Sesar OBD handapeun Tambih deui menu to look up definitions for any retrieved DTCs.

6. Spésifikasi

7. Garansi jeung Rojongan

For technical assistance, warranty information, or product support, please refer to the official THINKCAR website or contact their customer service. The device includes a Bantuan Jauh feature accessible via the 'More' menu, allowing technical support to connect to your device remotely if needed. An Palayanan Online option is also available for direct support.