Silverlit Drone Air Vision HD

Buku Panduan Drone Silverlit Flybotic Air Vision HD

Model: Drone Air Vision HD

1. Bubuka

Welcome to the world of aerial exploration with your new Silverlit Flybotic Drone Air Vision HD. This foldable drone is equipped with an HD camera, real-time Wi-Fi video feedback to your smartphone, and an integrated obstacle detector for a secure and enjoyable flight experience. This manual will guide you through the setup, operation, and maintenance of your drone.

The drone features automatic takeoff and landing, hover mode for stability, and comes with two rechargeable batteries for extended flight time. Its foldable design and included carrying pouch make it highly portable.

2. Émbaran Kasalametan

WARNING: Not suitable for children under 36 months. Contains small elements that may be swallowed.

  • Always operate the drone in open, unobstructed areas, away from people and animals.
  • Ensure the drone's battery and remote controller batteries are fully charged before each flight.
  • Ulah ngapungkeun drone dina angin kenceng atanapi kaayaan cuaca anu goréng.
  • Jauhkeun ramo sareng rambut tina baling-baling anu muter.
  • Read and understand all instructions before operating the drone.

3. Naon dina Box

  • Flybotic Drone Air Vision HD
  • Jauh Controller
  • 2 Rechargeable Drone Batteries
  • Mawa Kantong
  • Kabel Ngecas USB
  • Baling-balik cadang
  • Penjaga baling-baling
  • Obeng
Flybotic Drone Air Vision HD product box showing contents.

Product packaging for the Flybotic Drone Air Vision HD, detailing key features and included accessories.

4. Setélan

4.1 Unboxing & Initial Inspection

Carefully remove all components from the packaging. Inspect the drone and accessories for any signs of damage.

Flybotic Drone Air Vision HD with remote controller and smartphone.

The Flybotic Drone Air Vision HD, shown with its foldable design, remote controller, and a smartphone mounted for live video feed.

4.2 Battery Charging & Installation

  • Sambungkeun batré drone kana kabel ngecas USB.
  • Plug the USB cable into a 5V/2A power adapter (not included). The indicator light on the cable will show charging status (e.g., red for charging, green for full).
  • Once fully charged, insert the battery into the drone's battery compartment.
  • The remote controller requires 3xAA batteries (not included). Open the battery compartment on the back of the controller and insert the batteries, ensuring correct polarity.

4.3 Propeller Guard Installation/Removal

To install propeller guards, slide the curved surface of the guard upwards under the drone's motor. Position the guard onto the locking tabs at the base of the motor and apply slight upward pressure to securely clip it in place. To remove, press down on the guard near the motor base to release the clips.

4.4 Propeller Installation/Removal

To remove a propeller, hold the drone's motor firmly and use the provided screwdriver to unscrew the retaining screw. Carefully lift the propeller off. To install, ensure you match the propeller type (A or B) to the corresponding arm (A or B) marked on the drone. Place the propeller onto the motor shaft, insert the screw, and tighten it with the screwdriver, holding the motor in place.

4.5 App Ngundeur & Sambungan

Download the dedicated drone application from your smartphone's app store. Power on the drone and the remote controller. Connect your smartphone to the drone's Wi-Fi network (usually named after the drone model). Launch the app to view the live video feed and access additional controls.

4.6 Pairing & Calibration

Place the drone on a flat, level surface. Power on the drone and then the remote controller. The indicator lights on both devices will flash. Briefly press the 'One-Touch Calibration' button on the remote. The remote will beep, and the drone's lights will flash rapidly, indicating successful calibration. To unlock the drone, push the left joystick to the 7 o'clock position and the right joystick to the 5 o'clock position simultaneously. The propellers will start spinning slowly, indicating the drone is unlocked and ready for flight. To disable unlocking, push the left joystick all the way down.

A comprehensive tutorial demonstrating the setup, pairing, calibration, basic flight operations (takeoff, landing, directional control), speed adjustments, headless mode, 3D flips, camera angle control, photo/video capture, and media viewing for the M18LCD drone.

5. Parentah Operasi

5.1 Automatic Takeoff & Landing

After successful pairing and calibration, press the 'Automatic Takeoff/Landing' button on the remote controller. The drone will automatically ascend to approximately 1 meter and hover. To land, press the same button again, and the drone will gently descend and land.

5.2 Manual Takeoff & Landing

After unlocking the drone (propellers spinning slowly), gently push the left joystick upwards to make the drone ascend. To land manually, pull the left joystick downwards until the drone lands and the propellers stop spinning.

5.3 Kontrol arah

  • Joystick kénca: Ngadalikeun luhurna (luhur/handap) jeung yaw (muter ka kénca/katuhu).
  • Joystick katuhu: Ngadalikeun gerakan maju/mundur sareng bedil kénca/katuhu.

5.4 Saluyukeun Kacepetan

The drone has multiple speed settings. Press the speed adjustment button (usually located on the top left of the remote) to cycle through different speed modes (e.g., low, medium, high). The remote will emit a corresponding number of beeps to indicate the current speed mode.

5.5 Modeu Tanpa Kepala

To activate headless mode, press and hold the headless mode button on the remote until it beeps and a blue light on the drone's rear flashes. In headless mode, the drone's orientation is fixed relative to the remote controller, making it easier to control regardless of which way the drone is facing. For example, pushing the right joystick forward will always make the drone fly away from you.

5.6 3D Flip/Roll

To perform a 3D flip, press the '3D Flip' button (usually on the top right of the remote). The remote will beep. Then, push the right joystick in the desired direction (forward, backward, left, or right) to execute the flip. The drone will perform a 360-degree roll in that direction.

5.7 Operasi Kaméra (Poto/Pidéo)

Ensure a Micro SD card (up to 32GB, not included) is inserted into the remote controller for photo and video storage. To take a photo, briefly press the 'Photo' button. The screen will display 'Photo taken successfully'. To record a video, briefly press the 'Video Record' button. The screen will display 'Recording in progress'. Press the button again to stop recording.

5.8 Kaméra Angle adjustment

The drone's HD camera angle can be adjusted directly from the remote controller. Use the camera up/down buttons (usually located on the top right side of the remote) to tilt the camera up or down, allowing you to capture different perspectives during flight.

5.9 Viewing Photos & Videos

Ka view captured media, press and hold the 'Photo File' button to enter photo viewing mode. Use the 'Previous File' and 'Next File' buttons to navigate through your photos. Similarly, press and hold the 'Video File' button to enter video viewing mode. Select a video and press the 'Play/Pause' button to watch it. Press and hold the 'Home' button to exit file viewmodeu ing.

5.10 Ngahindarkeun halangan calakan

The drone is equipped with an integrated obstacle detector. This feature helps prevent collisions by automatically adjusting the drone's flight path when obstacles are detected, making it safer for beginners.

5.11 Trajectory Flight

Using the companion app, you can draw a flight path on your smartphone screen. The drone will then automatically follow this trajectory, allowing for pre-planned and precise flight routes.

5.12 Positioning Aliran optik

The optical flow positioning system provides enhanced flight stability, especially during hovering. It uses a downward-facing camera to detect ground patterns and maintain a stable position, resulting in smoother and more controlled flight.

Demonstration of the F417 LED drone's features, including obstacle avoidance, trajectory flight, and optical flow positioning.

6. Pangropéa

  • Clean the drone and remote controller with a soft, dry cloth after each use.
  • Avoid exposing the drone to water or extreme temperatures.
  • Store the drone in its carrying pouch in a cool, dry place when not in use.
  • Remove batteries from the remote controller if storing for extended periods.

7. Cara ngungkulan

  • Drone teu ngabales: Ensure both drone and remote are powered on and successfully paired. Check battery levels.
  • Penerbangan teu stabil: Perform calibration on a flat surface. Check for damaged propellers and replace if necessary.
  • Henteu aya feed video: Ensure your smartphone is connected to the drone's Wi-Fi network and the app is open. Check camera connection.
  • Waktos hiber pondok: Pastikeun batréna dicas pinuh. Waktos hiber tiasa kapangaruhan ku kaayaan angin sareng hiber anu agrésif.

8. Spésifikasi

FiturNilai
Ukuran produk (L x W x H)7.5 x 29 x 20 cm
Beurat560 gram
Disarankeun Umur14 taun ka luhur
Nomer modél54080
Bahan Utamapalastik
Jauh Control KaasupSumuhun
WarnaHideung
Fitur hususIntegrated Obstacle Detector, Hover Flight
Resolusi Rekaman Video720 p
Téhnologi konektipitasWifi
Format Capture VideoMP4
Tipe KontrolKadali jauh

9. Jaminan & Dukungan

For warranty information, technical support, or to purchase replacement parts, please refer to the full product manual included in the box or visit the official Silverlit website. Contact details for customer service can typically be found on the product packaging or the manufacturer's websitus.

Dokumén Patali - Drone Air Vision HD

Praview Silverlit BumperDrone HD 84813 Manual Pamaké
Pituduh komprehensif pikeun nyetel, ngalayang, jeung ngungkulan Silverlit BumperDrone HD (Model 84813), kaasup kadali hiber, ngecas batré, jeung parentah kaamanan.
Praview RC Drone Kahiji kuring: Manual pamaké sarta Guide ngalayang | Silverlit
Buku pituduh lengkep sareng pituduh pikeun Silverlit My First RC Drone (Model 84773 IM). Diajar ngeunaan setelan, kontrol penerbangan, pancegahan kaamanan, ngungkulan masalah, sarta ngecas batré pikeun drone kaulinan indoor ieu.
Praview Silverlit Stunt Drone 84841 User Manual and Operating Instructions
A comprehensive guide for the Silverlit Stunt Drone 84841, covering delivery contents, safety precautions, part identification, battery installation and charging, flight operations, troubleshooting, and calibration procedures.
Praview Silverlit Spy Racer Drone 84842: Photography and Filming Flight Manual
Comprehensive user manual for the Silverlit Spy Racer drone (model 84842), covering setup, flight controls, safety precautions, troubleshooting, and battery installation for photography and filming.
Praview Buku Panduan sareng Pitunjuk Pangguna Silverlit Bumper Drone Lite
Pituduh lengkep pikeun Silverlit Bumper Drone Lite (Modél 84826), anu ngawengku setelan, operasi, kaamanan, sareng ngungkulan masalah.
Praview Silverlit NEON STUNT Drone User Manual
User manual for the Silverlit NEON STUNT drone (Model 84827), providing instructions on setup, flight controls, safety precautions, troubleshooting, and technical specifications.