1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec Flux Rear Mid-Tower ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure correct setup and optimal performance.
Inpormasi Kasalametan: Always disconnect power from all components before installation or maintenance. Handle components with care to prevent damage. Wear an anti-static wrist strap when handling sensitive electronic parts.
Image: The Antec Flux Rear Mid-Tower ATX PC Case, showcasing its tempered glass side panel, mesh front panel, and pre-installed RGB fans.
2. Eusi Paket
Pastikeun yén sadaya komponén anu didaptarkeun di handap aya dina pakét anjeun:
- Antec Flux Rear Mid-Tower ATX PC Case
- 2 x 140mm ARGB PWM Fans (Front, pre-installed)
- 2 x 120mm PWM Reverse Fans (PSU Shroud, pre-installed)
- 1 x 140mm ARGB PWM Fan (Rear, pre-installed)
- Kotak asesoris (sekrup, beungkeut kabel, buku panduan)
- 13A PSU Extension Cable
- GPU Rojongan bracket
Gambar: Hiji ngabeledug view illustrating the various components of the Antec Flux Rear PC case, including the chassis, panels, and fans.
3. Spésifikasi
| Fitur | Rincian |
|---|---|
| Ngaran modél | Flux Rear |
| Jenis Kasus | Pertengahan Menara |
| Motherboard kasaluyuan | ATX, Micro-ATX, ITX (Supports Back-Connect Motherboards) |
| Ukuran (L x W x H) | 18.11 x 18.11 x 9.45 inci (460 x 460 x 240 mm) |
| Item Beurat | 18.03 pon (8.18 kg) |
| Bahan | Alloy Steel, Kaca Tempered |
| Kipas anu tos dipasang | 2x 140mm ARGB PWM (Front), 2x 120mm PWM Reverse (PSU Shroud), 1x 140mm ARGB PWM (Rear) |
| Dukungan Kipas (Max) | Front: 2x 140mm; Top: 2x 140mm or 3x 120mm; Rear: 1x 140mm or 1x 120mm; PSU Shroud: 2x 120mm |
| Rojongan Radiator (Max) | Top: Up to 360mm; Rear: Up to 120mm |
| CPU cooler Max Jangkungna | 180 mm |
| Panjang Maksimum GPU | 400 mm |
| Pamasangan catu daya | Front Mount (Max length without cable: 170mm) |
| Drive Bays | 1x 3.5", 2x 2.5" |
| I / O palabuhan | 2x USB 3.0, 1x USB-C 10Gbps, Headphone/Mic Combo Jack, Power Button, LED Control Button |
4. Setup jeung Instalasi
4.1 Nyiapkeun Pasualan
The Antec Flux Rear case features a tool-free panel design for easy access during assembly.
- To remove the tempered glass side panel, gently pull it open from the rear hinge.
- The metal right side panel can be removed by sliding it backward and lifting.
- The front mesh panel can be detached by pulling it from the bottom edge.
- The top panel can be lifted off after removing any securing screws.
Image: Illustration of the tool-free panel design, demonstrating how to remove the top, left glass, left metal, and front panels for access.
4.2 Pamasangan motherboard
The case supports ATX, Micro-ATX, and ITX motherboards, including back-connect models.
- Ensure the correct standoffs are installed for your motherboard size.
- Sacara ati-ati nempatkeun motherboard kana chassis, sajajarkeun sareng standoff sareng liang tameng I/O.
- Ngamankeun motherboard jeung screws disadiakeun.
- For back-connect motherboards, route all necessary cables through the designated cutouts behind the motherboard tray.
Gambar: Hiji internal view of the case demonstrating support for back-connect motherboards, with highlighted cable routing paths behind the motherboard tray.
4.3 Pamasangan catu daya
The Antec Flux Rear features a front-mounted PSU chamber.
- Install your power supply unit (PSU) into the front chamber.
- Connect the included 13A extension cable to the PSU and route it to the rear power inlet.
- Ensure the extension cable is securely connected and routed to avoid interference.
Gambar: A view of the front-mounted PSU chamber and the 13A extension cable, illustrating how the power supply is positioned and connected.
Image: Four distinct diagrams illustrating various methods for routing the power extension cable, depending on the power connector's position and desired cable path.
4.4 Pamasangan Drive (HDD/SSD)
The case provides dedicated mounting points for storage drives.
- Install 3.5" hard disk drives (HDDs) in the designated bay located at the rear of the case.
- Install 2.5" solid-state drives (SSDs) in the mounting locations behind the motherboard tray.
- Secure all drives with the provided screws.
Image: An internal diagram of the PC case, clearly marking the installation areas for the CPU, GPU, Motherboard, SSD, HDD, and Power Supply.
4.5 Pamasangan Kartu Grafika
Install your graphics card into the appropriate PCIe slot on your motherboard.
- Leupaskeun slot PCIe perlu nyertakeun ti pungkur kasus.
- Insert the graphics card firmly into the PCIe slot until it clicks into place.
- Ngamankeun kartu grafik kalawan screws.
- Utilize the built-in GPU support bracket to prevent sag for heavier graphics cards. Adjust the bracket to support the card's weight.
Image: A close-up illustration of the built-in GPU support bracket, demonstrating its function in preventing graphics card sag.
4.6 Pamasangan kipas sareng radiator
The case comes with five pre-installed PWM fans and offers extensive support for additional cooling.
- luhur: Supports up to 360mm radiators or 2x 140mm / 3x 120mm fans.
- Tukangeun: Supports 1x 140mm or 1x 120mm fan, or a 120mm radiator (with thickness between 55-70mm).
- Hareup: Supports 2x 140mm fans.
- Kain PSU: Supports 2x 120mm fans.
- When installing radiators, ensure proper clearance with other components.
Image: A diagram illustrating the various fan and radiator mounting locations within the PC case, along with their supported sizes.
Image: An illustration detailing the installation process for a 360mm radiator and a rear fan in the top section of the PC case.
4.7 Manajemén kabel
The case offers 37mm of space behind the motherboard tray for cable management, equipped with grommets and Velcro straps.
- Route power and data cables through the grommets and tie-down points.
- Use the included Velcro straps to bundle and secure cables, ensuring a clean interior and unobstructed airflow.
Image: A diagram illustrating the cable management features behind the motherboard tray, including space depth, cable ties, and grommets.
5. Operasi
5.1 Powering On
After completing all installations and connections, ensure the power cable is securely plugged into the rear of the case and a power outlet. Press the power button located on the top I/O panel to start your system.
5.2 Fungsi Panel I/O
Panel I/O luhur nyadiakeun aksés anu merenah pikeun port sareng kontrol penting:
- Tombol Daya: Ngahurungkeun / mareuman sistem.
- Port USB 3.0 (x2): Pikeun nyambungkeun alat USB 3.0.
- USB-C 10Gbps Port: For connecting USB-C devices with high-speed data transfer.
- Headphone/Mic Combo Jack: Pikeun asupan/kaluaran audio.
- Tombol LED: Controls the lighting effects of the ARGB fans.
Gambar: A close-up view of the top I/O panel, detailing the power button, USB 3.0 ports, USB-C 10Gbps port, headphone/mic combo jack, and LED control button.
5.3 Aliran Udara jeung Cooling
The Antec Flux Rear case is designed with the F-LUX Platform for optimized airflow and cooling performance.
- F-LUX Platform: Features a front-mounted PSU chamber that creates an unobstructed airflow path at the bottom of the case, enhancing GPU cooling.
- Multi-directional Vent Design: Incorporates extensive air intakes at the bottom, power supply chamber, lower sides, top, and a large-area mesh front panel to create a dedicated airflow channel.
- Kipas anu tos dipasang: The five pre-installed PWM fans are strategically placed to facilitate efficient air movement throughout the case.
Image: A diagram illustrating the 'Flow Luxury' F-LUX Platform, showing the internal airflow paths designed to enhance GPU cooling.
Image: A diagram detailing the 'Flux Airflow' system, indicating the positions and directions of the pre-installed fans within the PC case.
Image: Four separate images highlighting the multi-directional vent design, showing air intake points on the front panel, lower right side, left side of the PSU chamber, and the top panel.
Image: A diagram illustrating the optimized bottom air intake, specifically designed for efficient GPU cooling, with measurements for graphics card space and bottom clearance.
6. Pangropéa
Pangropéa rutin ngabantosan ngajamin kinerja optimal sareng umur panjang kasus PC anjeun.
- Saringan debu: Periodically remove and clean the dust filters located on the front, top, and bottom of the case. Use compressed air or a soft brush to remove accumulated dust.
- Bersihan Luar: Ngusap permukaan luar kalayan lemes, damp lawon. Hindarkeun pembersih atanapi pangleyur anu abrasif anu tiasa ngaruksak lapisan akhir.
- Beberesih interior: Saatos sistem dipareuman sareng dicabut tina colokanna, anggo hawa anu dikomprés pikeun ngabersihan lebu tina komponén internal sareng kipas.
7. Cara ngungkulan
If you encounter issues with your PC case, refer to the following common problems and solutions:
- Sistem Henteu Diaktipkeun:
- Ensure the PSU is properly installed and connected to the 13A extension cable.
- Pariksa yén kabel tombol daya disambungkeun leres ka lulugu panel hareup motherboard urang.
- Pariksa naha stop kontak listrik fungsina.
- Fans Not Spinning or No RGB:
- Pastikeun yén kabel kakuatan kipas disambungkeun aman ka motherboard atawa kipas controller.
- Ensure ARGB cables are connected to the motherboard's ARGB header or a compatible controller.
- Press the LED button on the I/O panel to cycle through lighting modes or ensure it's enabled.
- Port USB Teu Berfungsi:
- Check if the USB 3.0 and USB-C cables from the front panel are correctly connected to the motherboard headers.
8. Garansi jeung Rojongan
Antec products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Antec websitus.
For technical support, product inquiries, or assistance with troubleshooting, please contact Antec customer service through their official websitus atanapi inpormasi kontak anu disayogikeun dina dokuméntasi produk anjeun.
