FREDEES Glass Door Display Cabinet QM-97020-02 User Manual

1. Bubuka

Thank you for choosing the FREDEES Glass Door Display Cabinet. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your new cabinet. Please read these instructions carefully before beginning assembly and retain them for future reference.

Figure 1: FREDEES Glass Door Display Cabinet (Model QM-97020-02)

This image displays the front of the FREDEES Glass Door Display Cabinet. It features two upper doors with multiple glass panes, allowing visibility of items stored inside. Below the doors is an open storage compartment. The cabinet has a rustic brown finish and visible hardware on the corners and door hinges.

2. Émbaran Kasalametan

PERHATOSAN: Gagal nuturkeun parentah kaamanan ieu bisa ngakibatkeun tatu atawa ruksakna produk.

• Salawasna pasang kabinet dina permukaan anu lemes sareng bersih pikeun nyegah goresan.
• Ensure all parts are present and undamaged before assembly. Do not proceed if any parts are missing or defective.
• Jauhkeun bagian leutik sareng bahan bungkusan tina murangkalih sareng piaraan.
• Use appropriate tools for assembly. Do not overtighten screws, as this may damage the material.
• For wall-mounted installation, ensure the wall can support the weight of the cabinet and its contents. Consult a professional if unsure.
• Always use the provided anti-tip hardware to secure the cabinet to the wall, even if it is not wall-mounted, to prevent tipping.
• Ulah naék atawa ngagantung tina kabinet.
• Ngadistribusikaeun beurat merata dina rak pikeun ngajaga stabilitas.

3. Eusi Paket

Mangga parios heula sadaya komponén anu didaptarkeun di handap ieu kalebet kana pakét anjeun. Upami aya bagian anu leungit atanapi ruksak, mangga ngahubungi dukungan palanggan.

• Panel Kabinet (Atas, Bawah, Sisi, Balik)
• Glass Doors (2)
• Rak anu tiasa disaluyukeun (1)
• Door Hinges and Handles
• Assembly Hardware (Screws, dowels, shelf pins, etc.)
• Wall Mounting Hardware (Screws, anchors, anti-tip kit)
• Manual Pamaké (Dokumén ieu)

4. Spésifikasi

Gambar 2: Diagram Dimensi Produk

This diagram illustrates the precise measurements of the cabinet: 23.62 inches wide, 7.08 inches deep, and 24.8 inches high. It also details the internal shelf dimensions and door opening. The top shelf has a height of 7.1 inches, the middle shelf 7.1 inches, and the bottom open section 7.87 inches.

5. Setup (Parentah Majelis)

Assembly is required for this cabinet. Please follow these general steps. Refer to the detailed assembly diagram included in your package for specific part identification and screw types.

1. Nyiapkeun Workspace: Clear a spacious, clean, and soft area to prevent damage to the cabinet parts during assembly.
2. Identipikasi Bagian: Unpack all components and hardware. Compare them against the package contents list and the assembly diagram.
3. Kumpulkeun pigura: Attach the side panels to the top and bottom panels using the provided hardware (e.g., dowels and cam locks/screws). Ensure all connections are secure.
4. Pasang Panel Balik: Slide or fasten the back panel into place. This often adds rigidity to the structure.
5. Pasangkeun Engsel Panto: Secure the hinges to the cabinet frame and then to the glass doors.
6. Lawang Gunung: Carefully attach the glass doors to the cabinet frame using the installed hinges. Adjust hinges as needed for proper door alignment.
7. Install Door Handles: Attach the handles to the glass doors.
8. Selapkeun Pin Rak: Place the adjustable shelf pins into the desired holes inside the cabinet.
9. Place Adjustable Shelf: Position the adjustable shelf onto the pins.

Note: Specific assembly steps and hardware may vary. Always consult the detailed assembly instructions provided in your product packaging.

6. Installation (Wall Mounting)

This cabinet is designed for wall mounting. Proper installation is crucial for safety and stability. It is recommended to have two people for wall mounting.

1. Pilih Lokasi: Select a suitable wall location. Ensure there are no electrical wires or plumbing pipes behind the mounting area.
2. Identipikasi Tipe Tembok: Determine if your wall is drywall, plaster, concrete, or wood stud. This will dictate the type of anchors and screws needed.
3. Titik Pasang Tanda: Hold the assembled cabinet against the wall at the desired height. Use a level to ensure it is straight. Mark the positions for the mounting screws through the pre-drilled holes on the cabinet's back panel.
4. Bor Pilot liang: Drill pilot holes at the marked locations. Use a drill bit appropriate for your wall type and the provided wall anchors.
5. Selapkeun Jangkar Tembok: If mounting into drywall or plaster, insert the appropriate wall anchors into the pilot holes.
6. Kabinet Gunung: Carefully lift the cabinet and align the mounting holes with the pilot holes/anchors. Insert and tighten the mounting screws until the cabinet is securely fastened to the wall. Do not overtighten.
7. Pasang Kit Anti-Tip: Even after wall mounting, it is essential to install the anti-tip kit. Attach one bracket to the top rear of the cabinet and the other to a wall stud or appropriate wall anchor. Connect them with the provided strap or cable, ensuring it is taut but not pulling the cabinet away from the wall.

Figure 3: Cabinet in use, wall-mounted

This image shows the FREDEES Glass Door Display Cabinet installed on a wall above a bathroom vanity. The glass doors are open, revealing neatly organized items such as folded towels, bottles of shampoo, and other toiletries. The open bottom shelf also holds various small items, demonstrating the cabinet's storage capacity and versatility.

7. Operating (Adjustable Shelf)

The FREDEES Glass Door Display Cabinet features an adjustable shelf, allowing you to customize the storage space to fit items of various heights.

1. Empty the Shelf: Remove all items from the adjustable shelf before attempting to move it.
2. Cabut Rak: Carefully lift the shelf off its support pins.
3. Relocate Pins: Identify the desired new height for the shelf. Insert the shelf support pins into the corresponding holes on the cabinet side panels. Ensure the pins are level and securely seated.
4. Pasang deui rak: Place the adjustable shelf onto the newly positioned support pins. Ensure it is stable and level before placing items back on it.

This flexibility allows you to store taller items like vases or books, or create more compact spaces for smaller collectibles.

8. Perawatan sareng Pangropéa

To ensure the longevity and appearance of your FREDEES Glass Door Display Cabinet, follow these care instructions:

• Ngabersihkeun Beungeut Kai: Lap permukaan kai ku kaén nu lemes,amp cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the finish. Dry immediately with a clean cloth.
• Ngabersihkeun Panto Kaca: Use a standard glass cleaner and a lint-free cloth to clean the glass panels. Spray cleaner onto the cloth, not directly onto the glass, to prevent overspray onto wood surfaces.
• Debu: Regularly dust the cabinet with a soft, dry cloth to prevent buildup.
• Hindarkeun sinar panonpoé langsung: Paparan berkepanjangan ka sinar panonpoé langsung bisa ngabalukarkeun fading atawa discoloration tina finish kai.
• Pariksa Hardware: Périodik pariksa sagala screws na fasteners pikeun mastikeun aranjeunna tetep ketat. Retighten lamun perlu.
• Distribusi beurat: Always distribute weight evenly across shelves to prevent warping or instability.

9. Cara ngungkulan

If you encounter any issues with your FREDEES Glass Door Display Cabinet, please refer to the following common problems and solutions:

10. Garansi sarta Rojongan Palanggan

FREDEES stands behind the quality of its products. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any questions, missing parts, or assistance with assembly or installation, please contact FREDEES customer support through the retailer where the product was purchased or visit the official FREDEES websitus.

Dukungan Online: Visit the FREDEES Store on Amazon