ANYFAR RM-AD3504Q

ANYFAR RM-AD3504Q Decoder Adapter User Manual

Model: RM-AD3504Q | Brand: ANYFAR

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your ANYFAR RM-AD3504Q Decoder Adapter. This device is designed to integrate advanced features like Wireless CarPlay and Android Auto into compatible Audi vehicles while retaining the original car system functionality.

Important Compatibility Notice:

This decoder adapter is specifically compatible with 2010-2015 Audi A6 and A7 models equipped with the MMI 3G system. Please verify your vehicle's compatibility before proceeding with installation.

ANYFAR RM-AD3504Q Decoder Adapter and Car Display

Image 1.1: The ANYFAR RM-AD3504Q Decoder Adapter shown with a car's infotainment display featuring CarPlay.

2. Eusi Paket

Punten pastikeun sadaya barang aya dina pakét:

  • ANYFAR RM-AD3504Q Decoder Adapter

3. Kasaluyuan Kandaraan

The ANYFAR RM-AD3504Q Decoder Adapter is designed for specific Audi models and MMI 3G systems. Refer to the table below to confirm your vehicle's compatibility.

Compatibility table for Audi MMI 3G

Image 3.1: Compatibility table detailing Audi A6 and A7 models and years for MMI 3G systems.

Compatible Audi MMI 3G Models
Modél MobilMangtaun-taunUkuran layar
A62012-20156.5" / 7"
A72010-20156.5" / 7"

To determine your car's MMI 3G system version (Low/Basic, High, or 3G+), navigate to the 'Setup' or 'Settings' menu on your car's display and look for 'Version information' or 'Software version'. If you are unsure, please contact customer support for assistance.

4. Setup & Instalasi

Installation of the decoder adapter requires careful attention to wiring connections. It is recommended that installation be performed by a qualified professional.

4.1 Diagram Wiring

The following diagram illustrates the necessary connections for the decoder adapter with your vehicle's existing systems. Ensure all connections are secure and correctly matched.

Wiring diagram for ANYFAR Decoder Adapter

Image 4.1: Detailed wiring diagram showing connections for LVDS, CAN, power, USB, microphone, AUX, and camera inputs.

  • LVDS Cable: Connect the provided LVDS cable between the decoder and the original display cable.
  • CAN/Power: Connect the CAN and power wires to the corresponding vehicle harness.
  • USB: Connect the USB cable for media playback and phone charging.
  • Input Video: Connect rear view CVBS and front view CVBS cables for camera integration.
  • Audio: Connect AUX and MIC IN/OUT cables for audio functionality.
  • Air Conditioning Cable: Connect to the original Air conditioning cable.
  • Ngurangan Noise: If experiencing noise, try unplugging the designated cable as indicated in the diagram.

After all connections are made, secure the decoder adapter in a suitable location within the vehicle's dashboard or console, ensuring it does not interfere with other components or vehicle operation.

5. Parentah Operasi

The decoder adapter enhances your vehicle's infotainment system with various modern functionalities.

Features of the ANYFAR Smart Module

Gambar 5.1: Leuwihview of features including Bluetooth, CarPlay, Android Auto, Factory Protocol, Mirror Link, Lossless Installation, Voice Control, Live Map, Online Entertainment, and USB Play.

5.1 Dual System Switch

The adapter allows seamless switching between your vehicle's original MMI 3G system and the new CarPlay/Android Auto interface. This ensures you retain access to all original car functions.

Dual System Switch functionality

Image 5.2: Visual representation of switching between the original car system and the new interface.

5.2 Wireless CarPlay & Android Auto

Connect your smartphone wirelessly to access CarPlay or Android Auto. This enables navigation, music playback, calls, messaging, and voice assistant features directly on your car's screen.

  • Ensure your phone's Bluetooth and Wi-Fi are enabled.
  • On your car's display, select the CarPlay or Android Auto option.
  • Follow the on-screen prompts to pair your phone. Once paired, the connection will be automatic for future use.

5.3 Mirror Link & USB Drive Playback

The Mirror Link feature allows you to display your phone's screen directly onto the car's infotainment display. This is useful for viewing content from various applications.

Mirroring Link feature in action

Image 5.3: A smartphone screen mirrored onto the car's display, showing video content.

The integrated USB port supports media playback from a USB drive and can also be used to charge your smartphone.

5.4 Ngajaga Kontrol Mobil Asli

The decoder adapter is designed to work seamlessly with your vehicle's existing control mechanisms. You will retain full functionality of the original touchscreen, steering wheel controls, and MMI knob controls for both the original system and the new interface.

Original car controls retained

Image 5.4: Illustrates the continued use of the car's touchscreen, steering wheel controls, and MMI knob.

5.5 Smart Voice Assistant

Utilize your phone's voice assistant (Siri for CarPlay, Google Assistant for Android Auto) for hands-free operation. This allows you to control navigation, make calls, send messages, and play music using voice commands.

Smart Voice Assistant functionality

Gambar 5.5: Examples of voice assistant interfaces (Siri and Google Assistant) on the car display.

5.6 Backup Camera Input Support

The adapter supports connecting an aftermarket backup camera or front camera. When the vehicle is shifted into reverse, the display will automatically switch to the camera feed, enhancing safety during parking maneuvers.

HD Rear Camera display

Gambar 5.6: A view of the car's display showing a backup camera feed with parking guidelines.

6. Pangropéa

To ensure the longevity and optimal performance of your ANYFAR RM-AD3504Q Decoder Adapter, follow these general maintenance guidelines:

  • beberesih: Use a soft, dry cloth to clean the exterior of the decoder. Avoid using liquid cleaners or solvents, as they may damage the device.
  • Lingkungan: Ensure the decoder is installed in a location free from excessive heat, moisture, or direct sunlight.
  • Sambungan: Periodically check all wiring connections to ensure they remain secure. Loose connections can lead to intermittent functionality.
  • Apdet parangkat lunak: Pariksa produsén urang website for any available firmware updates for the decoder adapter. Follow the provided instructions carefully for any update procedures.

7. Cara ngungkulan

If you encounter issues with your decoder adapter, refer to the following common problems and solutions:

MasalahMungkin Cukang lantarananaSolusi
No display or black screenLoose LVDS cable connection; Power issue; Incorrect input selected.Check LVDS cable connections. Verify power supply to the decoder. Ensure the correct input source is selected on the car's MMI system.
CarPlay/Android Auto not connecting wirelesslyBluetooth/Wi-Fi not enabled on phone; Incorrect pairing; Interference.Ensure phone's Bluetooth and Wi-Fi are on. Delete previous pairings and re-pair the phone. Move phone closer to the adapter.
Taya audio atawa kualitas audio goréngLoose AUX/MIC connection; Incorrect audio source selected.Check AUX and MIC connections. Ensure the car's audio input is set to AUX. If noise is present, refer to the wiring diagram for noise reduction steps.
Original car controls not workingCAN bus connection issue; Software glitch.Verify CAN bus connections. Restart the car's MMI system.
Kaméra cadangan teu némbonganIncorrect camera input connection; Camera power issue.Check CVBS video input connection. Ensure the camera is receiving power.

If the problem persists after attempting these solutions, please contact ANYFAR customer support.

8. Spésifikasi

Key technical specifications for the ANYFAR RM-AD3504Q Decoder Adapter:

  • Jumlah modél: RM-AD3504Q
  • merek: ANYFAR
  • Téknologi konektipitas: USB
  • Jenis Controller: Hand Control (via original car controls)
  • Fitur husus: Leungeun-Free Telepon
  • Alat anu cocog: Smartphone
  • Tipe Panyambung: Micro USB
  • Mode Kaluaran Audio: Stereo
  • Pabrikan: Huizhou Rhythm Technology Co, Ltd
  • Ukuran Paket: 10.63 x 6.69 x 4.33 inci
  • Beurat barang: 1.76 pon

9. Jaminan & Dukungan

For warranty information and customer support, please refer to the documentation included with your product or visit the official ANYFAR websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

For technical assistance or inquiries, please contact ANYFAR customer service through their official channels.

Dokumén Patali - RM-AD3504Q

Praview ANYFAR Wireless CarPlay & Android Auto Interface Manual Pamaké pikeun Audi MIB / MMI 3G +
Manual pamaké komprehensif pikeun ANYFAR Wireless CarPlay jeung Android Auto panganteur kit dirancang pikeun Audi MIB / MMI 3G + sistem. Nyertakeun pamasangan, setelan, metode sambungan pikeun Apple CarPlay, Android Auto, sareng pangeunteungan layar, setélan audio, konfigurasi kaméra ngabalikeun, sareng kadali setir pikeun sagala rupa model Audi.
Praview Manual Pamaké RM-VLV2510F: Sistem Émbaran Mobil Cerdas ANYFAR sareng CarPlay & Android Auto
Manual pamaké pikeun RM-VLV2510F, sistem informasi mobil calakan ku ANYFAR nu nambahkeun Apple CarPlay nirkabel sarta fungsionalitas Android Auto kana kandaraan Volvo cocog. Ngawengku pamasangan, setelan, spésifikasi, sareng ngungkulan masalah.
Praview Manual Pamaké ANYFAR RM-AR2749F: Sistem Émbaran Mobil Calakan pikeun Alfa Romeo
Manual pamaké komprehensif pikeun sistem informasi mobil calakan ANYFAR RM-AR2749F, nampilkeun Apple CarPlay sareng Android Auto pikeun Alfa Romeo Giulia sareng Stelvio (2017-2020). Ngawengku pamasangan, setélan, spésifikasi, sareng ngungkulan masalah.
Praview Buku Panduan Pangguna RM-BZ2517F: Sistem Informasi Mobil Calakan nganggo CarPlay & Android Auto
Buku pituduh pikeun Sistem Informasi Mobil Cerdas RM-BZ2517F, anu ngajelaskeun fitur-fitur sapertos Apple CarPlay, Android Auto, pamasangan, setélan, sareng ngungkulan masalah pikeun kendaraan Mercedes Benz.
Praview ANYFAR Wireless CarPlay & Android Auto Retrofit Kit for Volvo: Installation and Settings
Comprehensive installation and settings guide for the ANYFAR Wireless CarPlay and Android Auto Retrofit Kit, designed for Volvo models (V60, V90, S60, XC40, XC60, XC90, S90) from 2017-2022. Covers DIP settings, button controls, wireless connection setup, and rear view camera integration. Also includes notes for Alfa Romeo models.
Praview User Manual RM-BM2506F - Intelligent Car Information System
User manual for the RM-BM2506F Intelligent Car Information System, providing installation, setup, and troubleshooting for Apple CarPlay and Android Auto integration with BMW and MINI vehicles.