VECTOR VECBC2 2 Amp Manual Batré Car Charger / Maintainer

1. Bubuka

This manual provides essential instructions for the safe and effective operation of your VECTOR VECBC2 2 Amp Battery Charger/Maintainer. This device is designed to charge and maintain 6-Volt and 12-Volt lead-acid batteries (flooded, GEL, AGM) at optimal capacity, promoting peak performance and extended lifespan. Please read this manual thoroughly before use and retain it for future reference.

2. Émbaran Kasalametan penting

Salawasna perhatikeun tindakan pencegahan kaamanan ieu pikeun nyegah cilaka pribadi atanapi karusakan kana carjer atanapi batré.

• Baca sagala parentah: Before using the charger, read all instructions and cautionary markings on the charger, the battery, and the product using the battery.
• Ventilasi: Ensure the charging area is well-ventilated. Batteries can produce explosive gases.
• Perlindungan panon: Salawasna nganggo pelindung panon nalika damel caket batré.
• Hindari Percikan Api: Ulah ngaroko atawa ngantep percikan api atawa seuneu aya di deukeut batré atawa mesin.
• Bener Voltage: Pastikeun carjer disetel ka volum anu lerestage (6V or 12V) for the battery being charged.
• Polaritasna: Connect the charger output clips to the battery terminals with correct polarity: RED to positive (+), BLACK to negative (-). Reverse polarity can cause damage.
• Pegatkeun Daya: Salawasna pegatkeun daya AC tina carjer sateuacan nyambungkeun atanapi nyabut konci batréamps.
• Pamakéan jero rohangan: This charger is designed for indoor use. Do not expose it to rain or excessive moisture.
• Not for Lithium Batteries: This charger is specifically designed for lead-acid batteries (flooded, GEL, AGM). It is not compatible with lithium-based batteries.

3. Eusi Paket

Pastikeun yén sadaya item aya dina pakét anjeun:

• VECTOR VECBC2 2 Amp Battery Charger/Maintainer Unit
• Batre Clamps (with quick connector)
• Ring Terminals (with quick connector)
• Manual pangguna (dokumén ieu)

Image 1: Included components of the VECBC2 charger. This shows the main charger unit, the quick-connect battery clamps, and the quick-connect ring terminals.

4. Fitur Produk

The VECTOR VECBC2 Battery Charger/Maintainer offers the following key features:

• 6V/12V Selector: Easily switch between 6-Volt and 12-Volt charging modes to match your battery's requirements.
• 2 Amp Ngecas: Provides a steady 2 Amp charge for efficient battery maintenance and charging.
• Quick Connectors: Allows for easy interchangeability between battery clamps sareng terminal cingcin.
• Low Voltage Santunan: Automatically adjusts for voltage drops caused by extension cords or other factors, ensuring consistent charging.
• 12 ft. Cable Reach: Long cable provides flexibility for connecting to batteries.
• Indikator Status Ngecas: LED lights indicate charging progress and error conditions.
• Reverse Connection Indicator: A dedicated LED warns of incorrect battery polarity connection.
• Desain kompak: Small footprint for convenient storage and portability.

Image 2: Front panel of the VECBC2 charger, highlighting the voltage selector switch and status indicator lights.

5. Parentah Setup

1. Nyiapkeun batré: Pastikeun terminal batréna bersih sareng bébas tina korosi. Upami diperyogikeun, bersihan nganggo sikat kawat sareng larutan soda kue.
2. Select Connection Type: Choose either the battery clamps or the ring terminals based on your application. Connect the chosen accessory to the charger's quick connector port.
3. Pilih Voltage: Use the red switch on the charger to select the appropriate voltage (6V or 12V) for your battery. Do not connect to AC power yet.
4. Nyambung ka Batré:
   • Nyambungkeun BEureum positip (+) clamp/ring terminal to the positive (+) battery terminal.
   • Nyambungkeun HIDEUNG négatip (-) clamp/ring terminal to the negative (-) battery terminal.
   • Pastikeun sambungan aman.
5. Nyambung ka Daya AC: Plug the charger's AC power cord into a standard 120V AC electrical outlet.

Gambar 3: Sisi view illustrating the quick connector port for attaching battery clamps atawa terminal ring.

6. Parentah Operasi

Once connected, the charger will automatically begin the charging process.

• Indikasi ngecas: The green LED indicator will blink during the charging phase.
• Indikasi Dicas Pinuh: When the battery is fully charged, the green LED will stop blinking and remain solid. The charger will then switch to maintenance mode to prevent overcharging.
• Indikasi kasalahan: If the red "Reverse Connection" LED illuminates, immediately disconnect the charger from AC power and correct the battery connections.
• Mode pangropéa: The charger can be left connected to the battery indefinitely in maintenance mode to keep it at optimal charge.

Ngaleupaskeun Pangisi Daya:

1. Unplug the charger's AC power cord from the electrical outlet.
2. Disconnect the BLACK negative (-) clamp/ring terminal from the battery.
3. Disconnect the RED positive (+) clamp/ring terminal from the battery.

7. Pangropéa

• beberesih: Disconnect the charger from all power sources before cleaning. Wipe the case with a soft, dry cloth. Do not use solvents or abrasive cleaners.
• Perawatan kabel: Inspect cables and connectors regularly for damage. Replace any damaged components immediately.
• Panyimpenan: Simpen carjer dina tempat anu tiis sareng garing upami henteu dianggo. Tetep kabel digulung rapih.

8. Cara ngungkulan

9. Spésifikasi

• model: VECBC2
• Masukan Voltage: 120V AC, 60Hz
• Kaluaran Voltage: 6V DC / 12V DC (selectable)
• Kaluaran Ayeuna: 2 Amps
• Jinis batré: 6V and 12V Lead-Acid (Flooded, GEL, AGM)
• ukuran: 7.4 x 3.7 x 1.8 inci
• beurat: 1.1 pon
• Panjang kabel: 12 feet (output cables)

Gambar 4: Tukangeun view of the VECBC2 charger, indicating potential wall-mounting options and product information label.

10. Garansi jeung Rojongan

For warranty information or technical support, please refer to the documentation included with your purchase or contact VECTOR customer service. Keep your proof of purchase for warranty claims.

Manufacturer: Baccus Global