Otomatis Pulse Pro Integrasi Rojongan
Otomatis Pulse PRO leuwihVIEW
Ningkatkeun pangalaman Otomatis anjeun ku cara ngahijikeun warna otomatis otomatis kana sistem kontrol ELAN Smart Home. Automate Pulse PRO nawiskeun integrasi anu kuat sareng kontrol teduh diskrit sareng komunikasi dua arah, nyayogikeun apdet sacara real-time dina posisi teduh sareng tingkat batré. Nampilkeun duanana Ethernet (CAT 5) sareng konektipitas nirkabel 2.4GHz, Pulse PRO ngajamin integrasi otomatisasi bumi anu lancar ngaliwatan port RJ45 anu gampang diakses anu aya di tukangeun hub. Unggal hub ngarojong nepi ka 30 nuansa, sahingga solusi serbaguna pikeun sagala setelan automation imah.
LEUWIHVIEW
| Pabrikan: | Rollease Acmeda |
| Jumlah modél: | Otomatis Pulse PRO |
| Vérsi Modul Inti: | 8.3 |
| Pamekar supir: | lampiran 4 |
| Tanggal Révisi Dokumén: | 1/24/2025 |
LEUWIHVIEW & CIRI dirojong
Supir ieu mangrupikeun Controller Interface Lighting pikeun Rollease Acmeda Automate Pulse PRO. Hal ieu ngamungkinkeun kontrol IP leuwih Rollease nuansa ti ELAN.
THE FOLLOWING OPTIONS ARE SUPPORTED BY THIS DRIVER:
- Alat cahaya dimmer, Shade, sareng Louvre.
- Realtime feedback of shade positions updated to ELAN Core.
- Open, and Ramp Paréntah luhur.
- Close, and Ramp Paréntah handap.
- Eureun pikeun ngeureunkeun gerakan rotasi atanapi posisi.
- Rotation accurate to 1.8% increments.
- Posisi akurat nepi ka 1% increments.
- Fitur naon waé anu henteu sacara khusus dicatet salaku didukung kedah dianggap henteu didukung.
OTOMATIS PULSE PRO HUB KONFIGURASI
The hub will need to be installed and configured with the Automate Pulse application. All shades should be configured with the Automate Pulse application before starting the installation of the ELAN driver. Please refer to the Automate Pulse application for step by step instructions on how to add shades to your hub.
KONFIGURASI
As with all third-party drivers these do not reside in the typical listing of drivers from ELAN. To add this driver to an ELAN system:
- Unduh . EDRVC file associated with this document if you do not already have it.
- Tempatna. EDRVC file dina lokasi dina komputer Anjeun.
- We recommend \User\<User>\Documents\Elan\Drivers.
- Dina g! Configurators arahkeun ka item Lighting Interfaces handapeun Lighting.
- Navigate to the location you saved the. EDRVC file to and select it.
- Select “Rollease Acmeda Automate v2” from the list and click “OK”.
- A prompt will appear saying there will be no support from ELAN, click “OK”.
- Supir ayeuna kedah katingali dina lulugu Interfaces Lighting.
INSTALATION PROCESS
It is recommended that you follow the below installation process in order to proper functionality with the driver.
- Pilih Tipe Interface anu anjeun hoyong pake dina Elan pikeun ngontrol nuansa.
- Anjeun tiasa ngalakukeun ieu ku netepkeun pilihan konfigurasi "Jenis Antarmuka" ka "Dimmer", "Shade", atanapi "Boh".
- Lebetkeun alamat IP tina Automate Pulse PRO Hub dina widang "Alamat IP".
- Klik "Papanggihan Alat" di handapeun jandela panganteur cahaya.
- Mangga antosan sababaraha detik pikeun supir manggihan sagala nuansa on hub.
- At this point your shades should be created under the lighting interface.
- [Optional] If you want to control the rotation of the shade you can add a Louvre device
- [Optional] If you want to control the rotation of the shade you can add a Louvre device
- Pilih Alat Pencahayaan (Euweuh) atawa salah sahiji nuansa nu geus dijieun.
- Pilih "Tambahkeun Alat Anyar".
- Pilih "Louvre Tilt".
- Lebetkeun Alamat tempat teduh dina garis konfigurasi "Alamat Shade" alat anyar.
- Lebetkeun "LOUVRE" (tanpa tanda petik) kana widang Tipe Alat.
- Bind the devices to user interface components in the custom pages.
Rincian Konfigurasi
Tabel di handap ieu nyayogikeun setélan anu dianggo dina Configurator. Dina tabél di handap:
- “<User Defined>”, etc. Type in the desired name for the item.
- “<Auto Detect>”, etc. The system will auto detect this variable.
- “<System>”, etc. The setting has been automatically set by the system. o “<Select>” A dropdown with a list of options.
|
Paranti |
Variabel Ngaran | Setélan | Koméntar |
| Panganteur cahaya | Ngaran | Default “Rollease Acmed a Automate v2” | |
| Sistem # | Ditetepkeun ku sistem pikeun ngaidentipikasi alat | ||
| Status Warna Coding | Diaktipkeun atanapi Dinonaktipkeun | ||
| Status | Kaayaan supir, dimana héjo anu saé sareng beureum hartosna aya masalah instalasi. | ||
| Vérsi supir | Versi supir | ||
| Ngajual Supir | Lampiran 4 | ||
| Dipasang | Tanggal sareng waktos supir dipasang | ||
| Tipe Alat | Labél anu ngaidentipikasi jinis alat supirna | ||
| Nungguan | Daptar nuansa kapanggih ku supir | ||
| Modeu Debug | Pilih verbosity tina éntri anu kedah muncul dina Log Supir | ||
| Tipe panganteur | Pilih jinis alat anu bakal didamel nalika kapanggihna | ||
| Alamat IP | Alamat IP Pulse PRO Hub | ||
| Palabuhan | Defaults to 1487, this should not be changed unless the Hub itself has changed its IP address | ||
| Alat lampu | Ngaran | Ngaran alat | |
| Lokasi | Lokasi alat dina proyék | ||
| Sistem # | Ditetepkeun ku sistem pikeun ngaidentipikasi alat | ||
| Tipe Alat | Jinis alat | ||
| Sumputkeun Alat tina Scheduler | |||
| Alamat ngiuhan | Alamat ngiuhan pikeun ngadalikeun | ||
| Tipe | SHADE, DIMMER, atanapi LOUVER. |
Kasalahan umum
- Lebetkeun alamat IP anu salah dina garis konfigurasi "Alamat IP".
- If you’re failing to discover devices double check this!
ELAN CONTROL SYSTEM CONNECTION
Pikeun pitulung salajengna, ngahubungan pangecér anjeun, didatangan kami websitus di www.rolleaseacmeda.com.
SUMBER DUKUNGAN:
rolleaseacmeda.com
0 2025 Rollease Acmeda Group
Patarosan remen ditaroskeun
No Pulse PRO detected.
Pastikeun yén Automate Pulse PRO anjeun ditugaskeun ka jaringan anu leres sareng kéngingkeun Alamat IP anu sayogi sareng tetep komunikasi sareng jaringan nganggo Aplikasi Automate Shades.
Wates ngiuhan teu disetel bener.
Calibrate shade limits with your Rollease Acmeda remote before setting the appropriate open and close time within ELAN SYSTEM.
Ngiuhan teu obah pisan.
Make sure the selected Pulse PRO Hub is the correct Pulse PRO Hub for the shade to be controlled. Confirm the correct bindings are set in the ELAN System connections tab between the Pulse PRO Hub and Shade drivers.
I have multiple Pulse PRO’s, what do I do?
Load two Automate Pulse PRO Hub drivers. After selecting “Retrieve Hubs” located in the driver actions tab, you will see different Automate Pulse PRO Hubs- select the desired one.
Kuring henteu ningali beungkeutan sahadé dina supir Pulse PRO Hub?
Pilih "Cabut Shades" anu aya dina tab tindakan supir.
How do I scan for available Automate Pulse PRO?
Once the Automate Pulse PRO Hub is properly connected via the Ethernet cable or Wireless network, navigate to the Automate Pulse PRO Hub Properties page within Composer. Select “Retrieve Hubs” located in the driver actions tab.
We get unexpected responses from the ELAN system, or “?” symbols
Pastikeun yén sadaya sambungan nganggo port ethernet atanapi Wi-Fi berpungsi leres. Sambungan lasut geus dipikawanoh pikeun ngahasilkeun hasil nu teu dihoyongkeun atawa teu kaduga.
Dokumén / Sumberdaya
 |
OTOMATIS Rojongan Integrasi Pulse Pro [pdf] Pituduh pamaké 8.3, annex4, Otomatis Pulse Pro Pangrojong Integrasi, Otomatis Pulse Pro, Pangrojong Integrasi, Rojongan |