ehx Canyon Echo Multi Fungsi Digital Tunda Manual Pamaké

Ehx Canyon Echo Multi-Function Digital Delay

spésifikasi

• Syarat Suplai Daya:
  • Voltage: 9vdc
  • Ayeuna: 100mA
  • Polaritasna: Puseur-négatip

Wilujeng sumping di Electro-Harmonix Canyon Echo: an extremely compact digital delay pedal with up to 3 seconds of delay time. The Canyon Echo features tap-tempo—with three different tap-division options a filter control to shape the tone of the repeats, tails mode to keep the repeats going after switching to bypass, and footswitch accessible infinite repeats.

Parentah Operasi

Insert the output plug from the supplied 9VDC AC adapter into the power jack at the top of the Canyon Echo. The unit must be powered to pass signal, even in bypass. The Canyon Echo features buffered analog bypass or digital bypass depending on settings. Connect an instrument cable from your instrument to the Input jack. Connect an instrument cable between the Output jack and a suitable amppangagung. Klik footswitch pikeun kalibet pedal jeung lampu LED.

Syarat Suplai Daya: Voltage: 9VDC ayeuna: 100mA polaritasna: Puseur-négatip Alat ieu dilengkepan hiji éléktro-Harmonix 9.6DC-200 catu daya. Pamakéan adaptor anu salah atanapi colokan kalayan polaritas anu salah tiasa ngaruksak alat sareng ngabatalkeun garansi. Ulah ngaleuwihan 10.5VDC dina colokan kakuatan. Catu daya anu dipeunteun kirang ti 100mA tiasa nyababkeun alat teu tiasa dipercaya.

Kadali & Jacks

1. ADUN Saluyukeun campuran kaluaran tina 100% garing ka 100% baseuh.
2. TUNDA Controls the delay time, ranging from 8ms to 3s.
3. nyaring Applies an adjustable low-pass or high-pass filter to the delay line. Set FILTER to the center or noon position to disable the filters. Turn the  FILTER counterclockwise to place a low-pass filter on the delay effect, giving the Canyon Echo a sound similar to an analog delay. Turn the FILTER clockwise to place a high-pass filter on the delay repeats, for an effect reminiscent of a tape delay. The further you turn the FILTER in either direction, the more filtering is applied to the effect.
4. FDBK Controls how many repeats the Canyon Echo generates. At a minimum, you get one repeat. At maximum, the repeats are nearly endless.
   CATETAN: The filter is placed in the feedback path of the delay and filters out more signal with each repeat, limiting the maximum repeats at more extreme FILTER settings.
5. TAP DIV Button When the delay time is set by tap-tempo, the TAP DIV button sets the tap-division:
   • Green – 1/8 Note equal to half your tap time
   • Orange – Dotted 1/8 Note equal to 3/4 of your tap time
   • Red – 1/4 Note equal to your tap time
6. Footswitch and Status LED. The footswitch engages or bypasses the effect. The LED indicates the selected tap division. In bypass mode, the LED is off. The LED blinks at the latest tap reading when the delay time is set by tap tempo.
7. Input Jack Impedansi: 2.2MΩ, Max Dina: +1.5 dBu
8. Kaluaran Jack impedansi: 680Ω, Max Out: +2.1 dBu
9. Power Jack ayeuna draw: 100mA at 9.0VDC.

Ketok Tempo
Footswitch tiasa dianggo pikeun nyetél waktos reureuh. Pencét jeung leupaskeun footswitch sahenteuna dua kali, dina waktu jeung musik Anjeun, pikeun nyetel tempo. LED blinks dina tempo pikeun ngonfirmasi waktu reureuh diatur ku ketok-tempo. Pikeun mareuman tap-tempo, cukup puter kenop DELAY pikeun ngareset waktos reureuh. Anjeun tiasa nganonaktipkeun lengkep tap-tempo ku nuturkeun léngkah ieu:

1. Power down the Canyon Echo.
2. Pencét jeung tahan footswitch bari nerapkeun deui kakuatan.
3. Continue to hold the footswitch for about two seconds, the LED will slowly blink through all three colors twice.
4. Ngaleupaskeun footswitch nu; tap-tempo ayeuna ditumpurkeun.
5. Repeat this process to re-enable tap-tempo. Tap-tempo disable is recalled through a power cycle, so you can set it and forget it.

Ulangan Taya Wates
When Tails ‘ bypass mode is enabled, you can activate Infinite Repeats mode by pressing and holding the footswitch.Press aholdold the footswitch.

1. After 500ms, the LED begins flashing through all three colors. Infinite Repeats is now active.
2. You can release the footswitch. The delay repeats will continue indefinitely.
3. Tap the footswitch once to re-enter normal delay mode.

While Infinite Repeats mode is active, no new signal is fed into the delay effect. The filter is taken out of the feedback path and placed instead on the delay output, so you can use it to shape the tone of your looping sound without degrading looped repeats as it does in normal delay mode. You can move the DELAY knob while Infinite Repeats mode is active toget pitch-shifted loops, like speeding up or slowing down a tape-machine.

Buntut jeung Pamilihan Bypass Analog
The Canyon Echo allows you to choose between two bypass modes
Analog: The bypass signal is fully analog; the delay effect instantly mutes upon entering bypass.
Tails: The repeats of the delay effect continue to decay naturally upon entering bypass; no new audio enters the delay block; bypass is digital. Tails bypass is selected by default from the factory.

To activate Analog bypass, do the following:

1. Press and hold the TAP DIV push button.
2. Saatos dua detik, LED asup kana Mode Partéi, dimana éta gancang ngurilingan tilu warna LED.
3. Leupaskeun tombol; Bypass analog ayeuna aktip.
4. Malikan deui prosedur anu sami pikeun ngarobih deui ka Tails bypass.

The bypass mode setting is remembered through power cycles, so you can set it and forget it.

FAQs

Q: Naon anu kudu dipigawé lamun alat teu hurung?
A: Ensure that you are using the correct 9VDC adapter with center-negative polarity and that the power supply meets the requirements of the device.

Q: Kumaha carana abdi tiasa ngahontal ulang taya wates?
A: Access infinite repeats by using the footswitch while in tails mode to continue repeats after switching to bypass.