eliot Lio Ditambah Smart Controller
spésifikasi produk:
- Ngaran produk: Eliot Original Smartcontroller
- komponén: 3-fach Memory-Bedienteil (memory handset), 1 Bedienteil (Handset), Schrauben (Screws 5*16 x2), Werkzeuge (Tools)
- Garansi: 2 taun
- Dimaksudkeun pamakéan: Dry office areas
Parentah Pamakéan Produk
Fungsi dasar:
- Drehung im Uhrzeigersinn - AUF (Rotasi Searah Jarum Jam - UP)
- Drehung gegen Uhrzeigersinn – AB (Anti-clockwise rotation – DOWN)
Saving Height Position:
- Mimiti mindahkeun meja ka jangkungna anu dipikahoyong anu bakal disimpen.
- Pencét M pikeun ngasupkeun panganteur mémori.
- Pilih salah sahiji tombol 1, 2, atawa 3 pikeun nyimpen jangkungna.
Selecting Saved Height Position:
Press memory button 1, 2, or 3 and the desk will move to the desired position. Keep the button pressed until the position has been reached. The display shows the current table height during the procedure.
Panginget Sedentary:
- Press the M button for up to 5 seconds until the display shows the graphic above.
- Toel deui tombol M pikeun ngasupkeun panganteur setelan.
- Select a time interval or the turn off option using the 1 and 3 buttons.
- Pencét tombol M pikeun mastikeun.
Konci kaamanan:
Select the locking interface graphic above from the menu and press M to enter. Use the 1 or 3 buttons to select locking or unlocking. Press M again to confirm.
Napigasi Menu:
To navigate through the menu, use buttons 1 and 3 to scroll left or right. Press M to select the desired function.
Bagéan
- Handset
Screws
Parabot
Manual Majelis
Léngkah 1
Using one of the two screws supplied with the frame, attach the handset to one of the predrilled holes on the underside of the desktop. Then insert the second screw directly into the desktop, applying some pressure to make a new hole. Please note that you can install the handset to the left or right side of the desktop
Lengkah 2
Connect handset to control box using the supplied cable, and securing the excess cable.
Garansi & Tanggung jawab
Garansi: 2 taun
This smartcontroller is designed for use in dry office areas only.
Pamakéan anu sanés aya dina résiko sorangan.
Dina kaayaan naon waé, produsén henteu nampi klaim garansi atanapi klaim tanggung jawab pikeun karusakan anu disababkeun tina pamakean atanapi penanganan anu teu leres.
Awas!
Gagalna nuturkeun paréntah ieu tiasa ngakibatkeun kacilakaan anu nyababkeun tatu pribadi anu serius.
Awas / Parentah Kasalametan
- Make sure to have followed all caution/safety instructions from the Eliot height adjustable desk original user & assembly instructions.
- When using the smartcontroller, the user must pay full attention and make absolutely sure that no person can be injured, or object damaged, in the process.
- If the product is visibly damaged, it may not be installed or used.
- Jauhkeun sadaya komponén listrik tina cairan.
- Do not open any of the electrical components. There is a danger of electrical shock.
- Any changes made to the standard configuration of the handset will invalidate all liability or warranty claims.
Unggal jalma anu tanggung jawab kana méja ieu, dina pamasangan atanapi padamelan méja, dina pamakean sapopoé atanapi dina jasa sareng perbaikan, kedah gaduh aksés kana petunjuk ieu sareng maca sacara saksama. Tetep parentah ieu deukeut meja adjustable jangkungna Anjeun.
Panganteur
Fungsi dasar
Operasi ngangkat
- UP
Clockwise rotation – desk moves up - TURUN
Anti-clockwise rotation – desk moves down
Fitur mémori
Saving height position
- Mimiti mindahkeun meja ka jangkungna anu dipikahoyong anu bakal disimpen.
- Press “M” to enter the memory interface.
- Select one of the buttons “1”, ”2”, or “3” to save the height.
Selecting saved height position
Press memory button “1”, “2” or “3” and the desk will move to the desired position.
Keep the button pressed until the position has been reached.
The display shows the current table height during the procedure.
Lebetkeun ménu
Pencét tombol "M" dugi ka 5 detik dugi ka tampilan nunjukkeun gambar di handap ieu.
ménu
- 1/5 Sedentary reminder function
- 2/5 Locking interface
- 3/5 Setting the upper & lower limit position
- 4/5 Vibration mode selection
- 5/5 Exit
Punten dicatet
Use the “1” and the “3” buttons to scroll left or right through the menu.
Then press ”M” to select the desired function.
Panginget sedentary
- Press the “M” button for up to 5 seconds until the display shows the graphic above.
- Touch the “M” button again to enter the settings interface.
- There are 3 different time intervals to choose from, or the turn off option. Select preference by navigating with the “1” and “3” buttons.
- Pencét tombol "M" pikeun mastikeun.
After setting successfully the display will confirm showing a “√”.
Then the display will show the set height and a progress bar for the timer.
When the set time is over, the desk will vibrate for 10 seconds.
The timer will reset when the desk has moved above 100 cm (39.5inch).
Konci kaamanan
Select the locking interface graphic above from the menu and press “M” to enter.
Use the “1” or “3” buttons to select locking or unlocking. Press “M” again to confirm.
After successful locking, the display will show “√”, and will display the lock icon as seen here below.
- a) Entering lock mode, controller can still be used.
- b) Appears after 5 seconds, controller is now locked.
Temporary unlock
Press the button sequence “1”, “2”, and “3” to unlock the controller temporarily. You can now make changes to the height or in the menu.
After 5 seconds the display (b) will appear and the controller will return to lock mode
Upami anjeun nyetél panginget sareng konci dina waktos anu sami, kadua ikon bakal ditingalikeun dina tampilan, sapertos anu katingali di dieu.
Setting the upper & lower limit position
- Move the desk to the desired maximum or minimum height position.2. Press the “M” button for up to 5 seconds to enter the menu.
- Select the setting upper & lower limit position interface graphic shown above from the menu and press “M” to enter.
- Use the “1” or “3” buttons to select upper limit or lower limit position or to cancel the upper/lower limits.
Pencét tombol "M" pikeun mastikeun.
Nalika méja dipindahkeun ka posisi jangkungna minimum atanapi maksimum, panganteur bakal masihan panginget sapertos anu dipidangkeun di handap ieu:
Pilihan mode geter
- Press the “M” button for up to 5 seconds to enter the menu.
- Select the vibration mode selection graphic shown above from the menu and press “M” to enter.
- Use the “1” or “3” buttons to select the preferred vibration option or to switch off the vibration.
- Pencét tombol "M" pikeun mastikeun.
Kaluar
Pikeun kaluar tina ménu, pilih grafik ménu kaluar anu dipidangkeun di luhur sareng pencét "M" pikeun mastikeun.
When the display shows an error code, it most likely needs to be reset. Please follow this procedure:
- Rotate the wheel anti-clockwise until the desk has reached it’s lowest position.
- Then release the wheel shortly.
- Then rotate the wheel anti-clockwise again for up to 5 seconds until the display changes to “RESET”.
- Release the wheel.
- Once again, rotate the wheel anti-clockwise until the desk lowers a little more and slightly rises. The display should now display the actual height.
- The desk has been reset and is now ready for use again .
If the reset does not resolve the problem and there is still an error code, please contact:
support@smartfurniture.de
www.eliotfurniture.com | support@smartfurniture.de
FAQs
Can the smartcontroller be used in wet environments?
No, this smartcontroller is designed for use in dry office areas only.
Sabaraha lami garansi pikeun produk ieu?
Mangsa jaminan nyaéta 2 taun.
Dokumén / Sumberdaya
 |
eliot Lio Ditambah Smart Controller [pdf] Instruksi Manual Lio Ditambah Smart Controller, Lio Ditambah, Smart Controller, Controller |