FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productspésifikasi

  • Ngaran produk:
    FlySpark F4 V1 BLS 60A tumpukan
  • Keunggulan AI:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • Rojongan Sofwér:
    Betaflight, INAV, Ardupilot, EMU-hiber, SkyBrush
  • ESC Communication:
    BLHeli_S Bluetooth & USB-C
  • Konektipitas:
    3-6S LiPo
  • ukuran:
    47.8mm (L) x 47.5mm (W) x 18.3mm (H)
  • Pamasangan:
    30.5 x 30.5mm kalayan ukuran liang 4mm
  • beurat:
    34g

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

Parentah Pamakéan Produk

FlySpark F4 V1 hiber controller

Tata perenah:
Refer to the user manual for the layout of the flight controller.

Sambungan Periferal:
Connect peripherals as per the provided diagram.

Konfigurasi Aplikasi & FC:
Use the recommended apps and follow the configuration instructions.

Pembaruan firmware FC:
Connect the flight controller to a PC via USB for firmware updates.

FLYSPARK BLS 60A 4-IN-1 ESC

Tata perenah:
Check the layout guide in the manual for proper installation.

Sambungan sareng Motor & Kabel Daya:
Connect motors and power cables securely.

Konfigurasi ESC:
Use the FlySpark app for ESC configuration settings.

Pembaruan firmware ESC:
Follow the provided steps to update the firmware for ESC.

FlySpark F4 V1 BLS 60A tumpukanFlySpark-F4-V1-Stack-Flight-Controller-fig-1

Spésifikasi LeuwihviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

BungkusanFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35V 1000uF Low ESR Kapasitor x 1
  • Kacang Nilon M3 x 4
  • SH 1.0mm 25mm-panjangna 8pin Cable(pikeun FC-ESC sambungan) x 1 SH 1.0mm 75mm-panjangna 6pin Cable* x 1
  • M3*30mm Batin-héksagonal Screws x 4
  • Kabel DJI 6pin(80mm) x 1
  • Kabel Daya XT60(100mm) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

diagram sambungan FCFlySpark-F4-V1-Stack-Flight-Controller-fig-6

Pituduh kana Sambungan FC & ESC

Métode 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

Métode 2:

Langsung Soldering

  • Solder 8 kawat ka 8 hampang dina unggal tungtung, nuturkeun definisi Pad handapFlySpark-F4-V1-Stack-Flight-Controller-fig-8

Spésifikasi controller hiber

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • Paké kabel 6-pin hadir kalawan Unit Udara O3 FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • Paké kabel 6-pin hadir kalawan FlySpark F4 V1 BLS 60A tumpukan

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

Catetan:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

Sambungan sareng Motor & Kabel DayaFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC firmware Update
Ieu 8-bit 50A ESC asalna tos dieusian ku firmware BLHeliS tapi ogé bisa flashed kana firmware Bluejay, nawarkeun RPM nyaring jeung rojongan Dshot Bi-arah. Turutan léngkah ieu pikeun ngapdet firmware:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. Nyambung ka PC:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

PERHATOSAN:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

FAQs

Kumaha kuring ngamutahirkeun firmware ESC?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

Dokumén / Sumberdaya

FlySpark F4 V1 Stack Flight Controller [pdf] Manual pamaké
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

Rujukan

Ninggalkeun komentar

alamat surélék anjeun moal diterbitkeun. Widang diperlukeun ditandaan *