i3CONNECT Elm 2 Témbongkeun Toel Interaktif

spésifikasi

• model: ELM 65
• VESA: 600×400
• Position of upper mounting point from TOP edge of the frame: 222 mm
• Beurat tanpa asesoris: 32 kg

PENCEGAHAN UMUM Kasalametan

• Before taking this product into use, please read and understand this manual and its guidelines thoroughly.
• Simpen manual ieu kanggo rujukan ka hareup sareng pikeun ngalatih operator tambahan produk anu bakal datang.

Panempatan sareng Kaayaan Ambient

• The allowable temperature range of the local ambient environment at which this device may operate is between 0°C and 40°C.
• Do not place the product near a radiator, heater, or other heat source.
• If the unit is suddenly moved from a cold to a warm place (e.g. from a truck), keep the power cable unplugged for at least 2 hours and make sure that any moisture inside the unit is evaporated.
• Do not expose the unit to rain, or a very humid weather condition.
• Make sure that the indoor environment is dry and cool. The allowable humidity range of the local ambient environment at which this device may operate is between 10% RH and 90%RH.
• Place the unit in a well-ventilated place, so heating can escape easily. Ensure that the unit has enough space for ventilation. A 10 cm space at the left, right, and bottom of the unit should be clear, and 20 cm should be kept clear above the device.

Lingkungan
Do not dispose of batteries in the trash. Always follow local regulations on the collection of batteries.

Lain

• All images and instructions within this manual are designed or written mainly for indicative purposes. There may be differences or changes between pictures/instructions and the actual product.

Setup sareng Instalasi

• Read the complete installation guide, and prepare all tasks, before executing the first step.
• Ulah nempatkeun barang beurat dina luhureun unit.
• Ulah nempatkeun unit deukeut parabot nu ngahasilkeun médan magnét.
• Entong ngalaan unit ka sinar panonpoé langsung sareng sumber panas sanés.
• Entong nempatkeun unit dina karanjang, stand, tripod, bracket, méja, atanapi rak anu teu stabil.
• Ulah nempatkeun cairan nu mana wae nu deukeut atawa dina unit, pastikeun teu tumpahan cairan naon di jero unit.

Kasalametan listrik

• Keep the power cable risk-free from physical or mechanical damage.
• Check and ensure that the power source (wall outlet) is connected with the ground.
• Unplug the power supply to the unit when the weather is thunder-storm or lightning.
• Check that your local power supply characteristics are suitable for the product’s operation voltage.
• Only use the original power cable from the accessory bag. Don’t modify or lengthen it.
• Unplug power supply cable when the unit will be in inactive for a longer time.

Pangropéa jeung beberesih

• Always unplug the power cable before cleaning.
• Clean the screen only with soft, dustless, dry cloths, specifically intended for LCD screen cleaning.
• For a deeper clean, always contact an authorized service center.
• Never use water or any spray-type detergent to clean the unit.
• Ulah muka alat. Henteu aya bagian anu tiasa dilayanan ku pangguna di jero.

UNBOXING

• Two persons are needed to do the unboxing and consecutive installation of the display.
• Get wall-mounts or stands ready first!

1. Remove the plastic clips on the 75” and 86” boxes.
2. Leupaskeun tali.
   Lift Up the cover and clear protective materials.
3. Install any hardware needed to hang the display (refer to the manual of the accessory)
4. Tetep bungkusan pikeun pamakéan hareup.

nanganan

The display is big and heavy.
The 65” and 75” should be handled by 2 persons.

To handle the 86” version, 3 persons are recommended.

WHAT ELSE IS IN THE BOX

• ACCESSORY BOX contains
• Power Cable, length 2m
• One end is a standardized IEC C13 (female plug) that inserts into the display.
• The other end is a localized socket plug.
• If you need a longer cable or a different socket plug, these can be sourced locally.
• kabel USB
• Length 2m type C (both ends).
• Modul WiFi
• Unit kadali jauh
• Set of batteries for remote control unit.
• Gancang Mimitian Guide

SET OF DISPLAY MARKERS contains

• Two markers that are optimized for ease of use on the touch surface of the display.
• Settings of color and width can be made through the i3STUDIO operating system.

IDENTIFIKASI PRODUK

Nyiapkeun INSTALASI

• A mounting bracket or cart is not included with your display, as there are various options to install the display to suit your requirements: fixed to the wall, height adjustable, mobile
  – or a combination of the above.
• Konsultasi i3-CONNECT.com to see different options. Refer to the installation manual of the chosen mount.
• The display has standardized VESA mounting points at the back, using M8 size screws to install.
• Kaseueuran mounts di pasar cocog sareng standar ieu. Éta rupa-rupa léngkah 10 cm lebar sareng jangkungna sareng ogé beban maksimal anu tiasa ditampi. Upami nambihan asesoris sapertos bar sora sareng/atanapi sistem kaméra, pertimbangkeun ieu.
• Refer to the drawings in this chapter to find the specifications and position, different for each size.

Nyiapkeun INSTALASI

ELM 65
Location of VESA mount

modél	VESA	Posisi titik ningkatna luhur ti ujung TOP pigura	Beurat tanpa asesoris
ELM 65	600×400	222 mm	32 kg

ELM 75
Location of VESA mount

modél	VESA	Posisi titik ningkatna luhur ti ujung TOP pigura	Beurat tanpa asesoris
ELM 75	800×400	201 mm	44 kg

ELM 86
Location of VESA mount

modél	VESA	Posisi titik ningkatna luhur ti ujung TOP pigura	Beurat tanpa asesoris
ELM 86	800×600	289 mm	62 kg

Hubungan Jaringan

Option 1: LAN network:
Plug in the LAN cable (if available) into one of the two LAN ports at the bottom of the display.

Option 2: WIFI network:
First insert the WiFi module into the slot at the bottom of the display. It only fits one way: arrows facing front and up.
Gently push it in place.

FIRST TIME POWER-ON

TURNING THE iCONNECT DISPLAY ON AND OFF

1. Colokkeun hiji sisi kabel listrik kana stop kontak listrik AC sareng sisi sanésna kana stop kontak témbok.
2. Switch on the Power Switch to turn the iCONNECT interactive display on.
3. The display is in standby mode now. Wait a moment until the power indicator lights up. Then press button on the remote or the button on the display again, to turn the iCONNECT interactive dispay on.
4. Pencét button on the remote or the button on the display again, to turn the display in standby mode.
5. Switch off the Power Switch to cut off the power completely

CATETAN: the ¡CONNECT interactive display needs some time to shut off correctly before it can be switched on again. By interupting this process, the next start up can take longer.

CATETAN: When there is no active source on the ¡CONNECT display, it will go into stand-by mode after 3 minutes.

SAMBUNGAN
Make sure both the external device as well as the iCONNECT display are turned off when connecting the external device to the display. Check the plugs at the ends of the cables to make sure that they are the correct type, before plugging them into the jacks of the iCONNECT interactive display.

FIRST TIME POWER-ON

Sawaktos Anjeun mimiti ngahurungkeun tampilan i3CONNECT, kaca menu di handap ieu nembongan dina layar.

When your device is not connected to LAN already, select your wireless network

Select your date & time preferences

Lengkah saterusna bakal nerapkeun setelan nu dipilih sarta bisa butuh sababaraha waktu pikeun ngalakukeunana.

Konektor jeung kontrol

Frontal

X	Detektor Gerak	Pikeun memicu mode stand-by nalika dianggurkeun
1	Tombol Multi Fungsi	User-defined preferred action
2	Tombol daya	Hurungkeun sareng pareumkeun unit
3	Sensor Jauh Jauh	Receive signals from remote control
4	Sénsor Cahaya Ambient	Automatic adjustment of brightness
5	Input USB-C	USB 3.2 Gen 1 × 1. Pikeun nyambungkeun tablet atanapi laptop: sora, gambar jeung kontrol touch.
6	input HDMI	Sambungkeun samentara laptop atawa PC
7	Touch Control Out	Toél kadali alat éksternal
8	USB 2.0	Sambungkeun alat éksternal (panyimpenan).
9	USB 2.0	Sambungkeun alat éksternal (panyimpenan).

Di Beulah Katuhu

Di handap

SAMBUNGAN    PEDARAN
Pidéo kaluar: HDMI & USB C	Connect an external device with a HDMI cable or USB-C cable to this port to output the image and sound of the interactive display.
USB 3.0	Sambungkeun alat USB ka port ieu pikeun OPS atawa Android.
USB-C	Connect an external device with an USB-C Cable to this port.  CATETAN: the display supports USB 3.2 Gen 1 x1. This supports built-in Touch Out.
Display port (DP) In	Sambungkeun alat éksternal nganggo kabel DP ka port ieu.
HDMI In	Sambungkeun alat éksternal nganggo kabel HDMI ka port ieu.
Touch out	Connect an external device to support touch control of an external device on the display.  CATETAN: Windows is Plug&Play, for Apple gestures a driver is needed.
Wi-Fi sareng Bluetooth antennas	Tighten to Wi-Fi and Bluetooth antennas in clockwise direction.
USB 2. 0	Sambungkeun alat USB ka port ieu pikeun Android.
PC asup	Connect an external device with VGA cable and Mini Jack to this port.
S/PDIF kaluaran	Connect a digital sound system to this SPIDIF jack.
Headphone kaluar	Sambungkeun headphone ka jack ieu.
LAN	Connect an external network/router with a LAN cable to this port.
Sajarah RS-232C	Sambungkeun kabel DB-9 ka port ieu pikeun kadali jauh, jasa jeung kagunaan séjén.
Audio Analog dina	Sambungkeun alat audio analog éksternal nganggo kabel Mini Jack ka jack ieu.

FRONTAL PEN HOLDERS

Bezel handap dispaly ngabogaan dua wewengkon recessed nu magnetically nahan stylus cocog.

Kadali jarak jauh

Alokasi tombol tina kadali jauh.

• Install the supplied batteries to get the remote working.
• Replace batteries when remote starts to become less responsive or stops working.
• NOTE: Remove the batteries when you are planning to not use the remote for over a month.

SETTING UP STUDIO

i3CONNECT STUDIO mangrupikeun antarbeungeut intuitif anu ngamungkinkeun anjeun ngajalajah sadaya kemungkinan alat ieu, sareng ngatur sadaya setélan. Rujuk kana manual online i3CONNECT STUDIO pikeun kéngingkeun sadaya inpormasi anu relevan.

Ngadaptar sareng nganggo pangaturan jauh tina tampilan ieu

Set Educational or Business for the best

You are all set to experience i3CONNECT STUDIO

iBSTUDIO LAUNCHER HOME INTERFACE

i3CONNECT STUDIO mangrupikeun antarbeungeut intuitif anu ngamungkinkeun anjeun ngajalajah sadaya kamungkinan sareng setélan alat ieu. Tingali kana manual online i3CONNECT STUDIO pikeun kéngingkeun inpormasi lengkep.

1. Clock and Date widget: Time flies when you are having fun, so we help you to not lose track of time.
2. Bar status:
   • A. i3CAIR air quality widget (needs optional i3CAIR sensor to monitor the air quality of the room that you are in)
   • B. Display name (the assigned name you set in one of the previous steps)
   • C. WIFI status (name of connected network)
   • D. i3ALLSYNC KEY (to wirelessly connect your device)
3. Fly Out menu (access tools, settings, warnings)
4. Fly-Out menu controls (show and hide the Fly Out menu)
5. Widget tiles (Add and lauch favorite applications with one touch. Initial widgets may vary upon the chosen preset ‘Educational’ or ‘Business’)
   • E. Write (Use the display as a flipchart or whiteboard)
   • F. Present (Share content from your device and use the display to control it)
   • G. Browser (Browse the internet, annotate and share the information)
   • H. USB-C (Select the frontal input for wired connection)
6. Exit (and go to…)

i3CONNECT STUDIO is very intuitive to use.
To get the most out of it and to learn the best tips and tricks, please proceed to the complete i3CONNECT STUDIO MANUAL, that can be found here: https://docs.i3-technologies.com/i3STUDIO/

¡BCONNECT ELM2 END OF LIFE

Kami manjangkeun umur produk kami nganggo téknologi modular sareng kami bahkan tiasa masihan produk kami umur kadua saatos dianggo munggaran. Kami reueus naon anu urang laksanakeun pikeun dunya anu langkung sustainable.
Kami komitmen pikeun ningkatkeun sirkularitas produk urang sareng ningkatkeun daur ulang sareng dianggo deui dina tungtung umur pikeun nyegah runtah anu teu dipikabutuh.
Datangna waktu nu kudu bagian jeung salah sahiji produk urang, mangga konsultasi kami websitus pikeun meunangkeun parentah newest kumaha lumangsungna.
Kami mangrupikeun produsén layar rampa anu munggaran (sareng ayeuna ngan ukur) kalayan paspor sirkular pikeun layar rampa kami. Ieu ngawengku hiji leuwih transparanview dina bahan kami nganggo, CO2-dampak solusi urang, kitu ogé mangrupa showcase sahiji inisiatif urang nyandak pikeun ngaleutikan dampak urang.

Recyclability of our products
At a product’s end-of-life, valuable materials often end up being disregarded and dumped in landfills. We believe that sustainability doesn’t end when our products have reached the end of their usable life. That’s why we’ve conducted a study to investigate the recyclability of our products. The results?

• 88% of the materials used in our products can be recycled.
• 12% is incinerated with energy recovery.
• A fraction of 0,1% ends up in regulated landfills.
• Kami komitmen pikeun ningkatkeun sirkularitas produk urang sareng ningkatkeun daur ulang sareng dianggo deui dina tungtung umur pikeun nyegah runtah anu teu dipikabutuh.

Patarosan anu sering ditaroskeun

Can I use any wall mount with this display?

Most wall mounts on the market are compatible with this display's standard VESA sizes. Ensure compatibility with the weight and dimensions of your display and any additional accessories.

How do I replace the remote control batteries?

Pay attention to the correct orientation when replacing the 2x AAA batteries in the remote control. Use Alkaline or rechargeable types only. Push down the cover of the battery compartment and slide it off to access the batteries.

Dokumén / Sumberdaya

i3CONNECT Elm 2 Témbongkeun Toel Interaktif [pdf] Instruksi Manual ELM 65, ELM 75, ELM 86, Elm 2 Interactive Touch Display, Elm 2, Interactive Touch Display, Touch Display

Rujukan

• Manual pamaké