IQ PANEL-LOGO

IQ PANEL PG9938 Remote Panic Button

IQ-PANEL-PG9938-Remote-Panic-Button-PROSDUDCT

spésifikasi

  • Product Name: PG9938 Remote Panic Button
  • Compatibility: IQ Panel 4 v4.5.2 and higher
  • Functionality: Enrolled as audible or silent medical, or audible or silent intrusion alarm activation

IQ Panel 4 v4.5.2 and higher

The PG9938 remote panic button can be enrolled into an IQ4 panel as audible or silent medical, or audible or silent intrusion alarm activation for the system.

Prosés pendaptaran:

Pencét jeung tahan tombol IQ-PANEL-PG9938-Remote-Panic-Button (2)button of the fob until the keyfob’s LED flashes amber

IQ-PANEL-PG9938-Remote-Panic-Button (3)Tech Tip: If the LED flashes only once after holding for 10 seconds, or if it flashes multiple times the keyfob may have been enrolled into another panel.
Leupaskeun tombol IQ-PANEL-PG9938-Remote-Panic-Button (2)and press and hold again.

Pemrograman:

Settings > Advanced Settings > Installation > Devices > Security Sensors > Auto Learn Sensor
Pencét jeung tahan tombolIQ-PANEL-PG9938-Remote-Panic-Button (2) of the fob until the keyfob’s LED flashes amber

Program the ‘Sensor Group’, ‘Sensor Name’ and ‘Voice Prompts’ as needed.
Select “ADD NEW”.

IQ-PANEL-PG9938-Remote-Panic-Button (4)

Tech Tip: Do not program the PG9938 as a Fixed sensor group.

Select only:

  • 1 – Mobile Intrusion
  • 3 – Mobile Silent
  • 6 – Mobile Auxiliary
  • 7 – Mobile Silent Auxiliary
  • 25 – Safety Auxiliary Pendent (non-alarm)
  • (Set ‘Voice Prompts’ to OFF for no zone status annunciation)
  • If a Fixed sensor group is used the zone may go into supervisory trouble after the supervision window has expired (default 24 hours.)
  • When supervisory trouble occurs the History tab under Settings > Status will show “Failure” with a time and date stamp of the loss of supervision.
  • In addition, the device tray on the arming page will show a  for the zone. IQ-PANEL-PG9938-Remote-Panic-Button (5)

Operasi Tombol

IQ-PANEL-PG9938-Remote-Panic-Button (1)

FAQ

What should I do if the LED on the keyfob flashes only once or multiple times during enrollment?

If the LED flashes only once after holding for 10 seconds or multiple times, it may indicate that the keyfob has been enrolled in another panel. Release the button and try enrolling again.

Dokumén / Sumberdaya

IQ PANEL PG9938 Remote Panic Button [pdf] Instruksi Manual
PG9938, PG9938 Remote Panic Button, Remote Panic Button, Panic Button, Button

Rujukan

Ninggalkeun komentar

alamat surélék anjeun moal diterbitkeun. Widang diperlukeun ditandaan *