KORG E3 USB Boot Utiliti

spésifikasi

• Ngaran produk: Korg USB Boot Utility
• Fungsionalitas: Software update & recovery utility
• Kasaluyuan: wavestate, modwave, multi/poly, and opsix instrument families
• Sistem Operasi Dirojong:
  • macOS: macOS 10.12 through macOS 14, Intel or Apple Silicon
  • Windows: Windows 10 and 11 (64-bit versions only)

Ngeunaan Korg USB Boot Utiliti

The Korg USB Boot Utility provides low-level software installation and repair for select Korg hardware instruments. Currently, this includes the wavestate, modwave, multi/poly, and opsix instrument families. It can be used even if the USB network connection to the instrument is not available, or if the instrument is not starting up normally. Important: This application must be used with caution. It cannot detect the type of instrument to which it is connected. When using it, you must be very careful to select the appropriate file pikeun alat Anjeun. Pamakéan anu salah tiasa nyababkeun alat teu tiasa dianggo. The Korg USB Boot Utility nyambung ka server internét pikeun ngundeur software pikeun instalasi. Dina sababaraha kasus, vérsi parangkat lunak tiasa langkung lami tibatan anu sayogi ngalangkungan aplikasi Korg System Updateater. Pamasangan files ogé bisa disimpen pikeun pamakéan offline.

What’s installed on my computer, and why

• To use the Korg USB Boot Utility, the instrument is put into a special “USB Boot Mode” state, in which it appears as a
• Alat panyimpenan USB.
• For macOS, no drivers are installed.
• For Windows, the installer includes the BCM2710 Boot driver.

Awas

• Kadé: Do not disconnect your instrument from USB, or turn its power off, while the updater is running.
• Kadé: To make sure that you are working with the right instrument, only one instrument at a time should be connected via USB Boot Mode.
• penting: This process makes some of the instrument’s storage available to the host operating system (macOS or Windows). This storage format is unfamiliar to macOS and Windows, which may prompt requests to scan, fix, or reformat the drive. DO NOT, UNDER ANY CIRCUMSTANCES, REFORMAT THE DRIVE.

syarat operasi
To use the Korg USB Boot Utility, you need an internet connection to download updates (offline operation is supported after the update has been downloaded), a USB cable, and a USB-capable macOS or Windows computer that satisfies the requirements below.

Catetan: fungsionalitas pinuh teu merta dijamin kalawan sakabeh komputer, sanajan aranjeunna nyugemakeun sarat sistem ieu.

macOS
Sistem operasi: Mac OSX 10.12 ngaliwatan macOS 14, Intel atawa Apple Silicon.

Windows
Sistem operasi: Windows 10 jeung 11. Vérsi 64-bit wungkul; Vérsi 32-bit teu dirojong. Operasi panel toél teu dirojong.

Pamasangan

macOS
To install the Korg USB Boot Utility on macOS:

1. Open the “Korg USB Boot Utility Installer [version number].dmg” file in the Finder. The disk image will open.
2. On the disk image, open the Korg USB Boot Utility [version number] .pkg file. The installer will start.
3. Turutan pitunjuk dina layar pikeun ngarengsekeun pamasangan. Lebetkeun kecap akses administrator anjeun nalika dipenta.

The installation will run, and the application will be installed in Applications/KORG/Korg USB Boot Utility.

Windows
To install the Korg USB Boot Utility on Windows:

1. Double click “Korg USB Boot Utility [version number] Installer.exe” to start the installation process. The installer will start.
2. Turutan pitunjuk dina layar pikeun ngarengsekeun pamasangan.

The installation will run, including the Korg USB Boot Utility application and the BCM2710 Boot driver. In some cases, the instruments may not be immediately recognized after installation. If this occurs, simply restart your computer.

Ngagunakeun Korg USB Boot Utility

Ngamutahirkeun ku komputer nu disambungkeun ka internét
The USB Boot Utility allows you to update the instrument software even if the USB network connection to the instrument is not available or if the instrument is not starting up normally.

penting: During this process, the instrument will connect to the computer as a USB storage device. Under some circumstances, Windows users may see a prompt to format the newly connected device. Do not do this! Formatting will render the instrument inoperable.

1. Start with the instrument powered off.
2. Connect the instrument via a USB cable.
3. Open the Korg USB Boot Utility application. On Windows, right-click on the application icon and choose the “Run as Administrator” option. The window will contain a list of the most recent software versions of all products supported by the Korg USB Boot Utility, labeled “Select model.” The last option in the list is “Previously saved file.” For more information on this, see “Offline use: saving and installing update files,” below.
4. Select the model name that matches your instrument.
   penting: Be very careful to select the correct model! The Korg USB Boot Utility cannot detect the type of instrument to which it is connected. Incorrect use may render the instrument inoperable.
5. Press the Select button. The Korg USB Boot Utility will download the selected software, and then show a warning message to remind you to confirm that you’ve selected the correct model.
6. Press OK if you’re sure that you’ve selected the correct model to match your instrument. The window will change to show the title “Start the instrument in USB Boot Mode.” This page includes detailed directions for how to start the specific model in USB Boot Mode. These directions vary depending on the model, so please follow them closely. At the top of the window, you’ll see the selected model and the software version to be installed.
7. Follow the on-screen instructions for starting the instrument in USB Boot Mode.
8. Once the instrument is in USB Boot Mode, press Start to begin the installation, or Cancel to stop.
   penting: Do not disconnect your instrument from USB or turn its power off while the installer is running.
   Catetan: After pressing Start, you may see a system message about accessing files dina volume jauh. Lamun talatah nembongan, pencét OK pikeun ngidinan aksés. Sababaraha pesen kamajuan bakal muncul. Saatos atanapi dua menit, jandela bakal nunjukkeun pesen "Files written successfully.” The instrument must now be restarted to finish the installation. To do so:
9. Physically disconnect the instrument power cable.
   The power switch is software-controlled and will not function at this point in the installation. You may see a system
   message about a disk not being ejected properly. You can safely ignore this message.
10. Re-connect the instrument power cable, and then turn on the instrument.
    The instrument will start the software update process. The startup screen may show for a while, followed by blinking LEDs on the front panel. Please be patient. When the update is complete, the screen may go dark for about 12 seconds. The system will then restart automatically, ready to play.

Pamakéan offline: nyimpen sareng masang apdet files
Nalika sambungan internét diperyogikeun pikeun ngaunduh apdet parangkat lunak, Korg USB Boot Utility ogé ngadukung pamasangan offline anu diunduh sateuacana. files. Anjeun oge bisa nyimpen apdet files ti Korg USB boot Utiliti, pikeun pamakéan engké.

Nyimpen apdet file

To save an updated file:

1. Follow steps 1-4 of “Updating with an internet-connected computer,” above.
2. Press the Save button. A standard file dialog will appear, with the prompt “Choose Folder To Save Image.”
3. Select a location on disk to save the update image, and press Open. The Korg USB Boot Utility will download the selected software and then show a confirmation message. The file bakal dingaranan sapertos "wavestate_mkII_usb_boot_3_0_9.zip."

penting: Do not unzip the file.

Masang apdet ti a file

Pikeun masang apdet anu disimpen file

1. Follow steps 1-3 of “Updating with an internet-connected computer,” above.
2. Under “Select model,” click “Previously saved file” terus pencét Pilih. Standar file dialog bakal némbongan, kalayan ajakan "Pilih Saméméhna Disimpen File.”
3. Select the previously saved update image–for example, “wavestate_mkII_usb_boot_3_0_9.zip”–and press Open. You’ll see a warning message to remind you to confirm that this matches your instrument.
4. Return to step 6 of “Updating with an internet-connected computer,” above, and follow all of the remaining steps.

Konfirmasi apdet

kaayaan gelombang, modwave, sarta multi / poli
For the wavestate, modwave, and multi/poly, the software version is shown on the About page. To get there:

1. Press UTILITY twice, and then hold SHIFT and press < (PAGE -). This will take you to the About page. The version number is shown at the top of the screen.

opsix
For the Opsix, the software version is shown at startup. To see this information:

1. Restart the Opsix
   The software version will appear in the upper right-hand corner of the screen.

FAQs

What are the operating system requirements for using the Korg USB Boot Utility?

For macOS, you need Mac OSX 10.12 through macOS 14, Intel or Apple Silicon. For Windows, Windows 10 and 11 (64-bit versions only) are supported.

Can I use the Korg USB Boot Utility without an internet connection?

While an internet connection is initially required to download software updates, you can also save update files ti utiliti pikeun instalasi offline.

Pariksa naha aplikasi sejenna bisa jalan

If other applications are running, it is possible that they might somehow interfere. As a troubleshooting step, quit the other applications.

Can’t connect to the instrument. Make sure that the instrument is connected via USB

The Updater requires a USB and cannot communicate with the instrument over 5-pin DIN MIDI.

Try connecting the instrument directly to your computer, without a USB hub

Hubs anu salah tiasa ngaganggu sambungan. Hub kedah ngadukung USB 2.0 atanapi langkung saé.

Coba kabel USB anu béda

A faulty cable may interfere with the connection. Apple, Mac, and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Windows is a trademark of Microsoft Corporation in the US and other countries. All product names and company names are the trademarks or registered trademarks of their respective owners. Specifications and appearance are subject to change without notice for improvement.

Dokumén / Sumberdaya

KORG E3 USB Boot Utiliti [pdf] Instruksi Manual E3, E3 USB Boot Utility, E3, USB Boot Utility, Boot Utility, Utiliti

Rujukan

• Manual pamaké