LECTRON Supercharger to CCS1 Vortex Plug with Interlock
Parentah Pamakéan Produk
- Press the NACS Unlock Button and connect the NACS DC EV Connector into the Adapter until it clicks securely.
- Open the EV inlet charging flap and plug the Adapter into the CCS1 inlet, ensuring a secure latch.
- Once connected, the EV interlock pin will engage, preventing removal until charging is complete.
- Wait for the communication establishment between the vehicle and charger.
- Confirm on the vehicle’s display that charging has started.
- Press the white button to stop the charging session.
- Press the CCS1 Unlock Latch on the Adapter and pull to disengage from the EV inlet.
- Press the NACS Unlock Button and disconnect the NACS DC EV Connector.
- Store the Adapter in a dry, secure, and clean place after use.
Bubuka
Bubuka NACS TO CCS adaptor
- Vortex Plug NACS ka adaptor CCS ngamungkinkeun kandaraan listrik anu diaktipkeun CCS1 ngagunakeun Standar Ngecas Amérika Kalér (NACS) pikeun ngaksés pangecas gancang NACS DC.
PERHATOSAN
- Luhur Voltage - Nanganan kalayan ati-ati sareng mastikeun sambungan anu leres sateuacan dianggo.
- Awas - Résiko Setrum Listrik sareng Seuneu. Entong nganggo produk ieu upami aya karusakan kana kabel EV, konektor kendaraan, atanapi saluran asup kandaraan.
PITUDUH KASELAMATAN PENTING
PERHATOSAN – When using electric products, basic precautions should always be followed, including the following.
This manual contains important instructions for Model LEADPTeslaCCSBLKUS that shall be followed during use and maintenance of the adapter.
- Baca sadaya parentah sateuacan nganggo produk ieu.
- Ulah nempatkeun ramo kana adaptor nu.
- Do not use this product if the flexible output cable, vehicle connector, vehicle inlet, or the adapter itself has broken insulation, broken, or cracked housings, or if internal parts are accessible including wiring.
- Do not use this adapter with any charger or EV that is capable of exceeding the adapter’s rated voltage atawa kapasitas ayeuna. Sababaraha kombinasi EV sareng EVSE sanggup sababaraha voltages atawa durasi kawates overloading ayeuna dirancang pikeun EVSE normal pikeun sambungan EV. Pamakéan adaptor dina kaayaan ieu tiasa nyababkeun kaayaan anu teu aman sapertos seuneu, kaduruk, atanapi paparan vol tinggitage.
SIMPAN PITUDUH IEU PIKEUN RUJUKAN
Pikeun dianggo sareng pangecas gancang NACS DC ONLY
NOT suitable for use with
Punten BACA PITUDUH SAEU MANGKEUN:
- Dimaksudkeun pikeun kendaraan CCS1 dina aliansi NACS wungkul. Mangga parios kalawan automaker Anjeun pikeun kasaluyuan.
- Turutan prosedur sambungan sareng pegatkeun sambungan anu leres sakumaha anu ditunjuk dina manual pangguna.
- Ulah megatkeun sambungan salila ngecas.
- Ngajaga tina cai jeung Uap.
- Beroperasi dina rentang suhu -22°F nepi ka 122°F.
- Nanganan kalayan ati-ati sareng simpen di tempat anu aman.
- Ulah ngabersihan ku deterjen.
- Ulah muka atawa ngaropéa adaptor nu.
Kontak Rojongan Palanggan di contact@ev-lectron.com pikeun tungtunan pamakéan, pangropéa, atawa perbaikan.
Naon anu kaasup
Bagean leuwihVIEW
- CCS1 Coupler
- NACS DC Inlet
- CCS1 Buka Konci Latch
- Tombol Konci NACS
Sateuacan nganggo
- CATETAN: Pastikeun Tesla Supercharger ngarojong ngecas CCS1.
- PERHATOSAN: Ulah nyimpen NACS ka CCS1 Adaptor di luar rentang suhu gudang tina -40°F nepi ka 185°F.
WAKTU ngecas
- Waktu ngecas beda-beda gumantung kana stasiun ngecas gancang NACS DC, spésifikasi kendaraan listrik, kaayaan lingkungan, sareng suhu batré.
- The NACS to CCS Adapter includes built-in temperature monitoring.
- Charging power will decrease if the internal components of the adapter exceed 194°F.
- The operation will shut off if the surface temperature of the adapter reaches 140°F.
Nyambungkeun Adaptor
To initiate a session through your vehicle’s display or the Mercedes-Benz App, first activate the charging session to unlock the station and then proceed to the steps below.
- Press the NACS Unlock Button and plug the NACS DC EV Connector into the Adapter until it clicks to ensure the latch is secure.
- Open your EV inlet charging flap and plug the Adapter into the CCS1 inlet. Ensure the latch is secure.
- Once the Adapter is securely connected to the vehicle’s charging inlet, the EV interlock pin will engage, preventing removal of the Adapter until after charging is complete.
- Allow a brief pause for the vehicle and charger to establish communication. Check your vehicle’s display to confirm a charging session has successfully started.
DISCONNECTING Adaptor
- When charging is complete, press the white button to stop the session before removing the Adapter.
- Press the CCS1 Unlock Latch on the Adapter and pull to disengage the Adapter from the EV inlet.
- Press the NACS Unlock Button on the Adapter and disconnect the NACS DC EV Connector.
- Store the Adapter in a dry, secure and clean place to keep it free from debris and damage.
PAMÉRÉSAN MASALAH
Upami kendaraan gagal ngamimitian ngecas, punten pertimbangkeun léngkah-léngkah ieu:
- Pastikeun pangecas gancang DC ngadukung kendaraan CCS1.
- Pariksa sambungan teguh boh NACS na CCS1 tungtung adaptor nu.
- Cabut colokan anu aman nuturkeun prosedur manual pangguna, teras ngamimitian prosés sambungan deui.
- Pariksa status ngecas dina carjer gancang NACS DC sareng tampilan kendaraan listrik.
- Lamun masalah persist, mangga ngahubungan contact@ev-lectron.com
SPESIFIKASI
| Dipeunteun ayeuna: | 500A DC |
| Input / kaluaran dipeunteun: | 1,000V DC |
| Rating tahan cuaca: | IP67 |
| Suhu operasi: | -22 ° F - 122 ° F |
| Suhu Panyimpenan: | -40°F nepi ka 185°F |
| Panyambung: | CCS1 |
| Inlet: | NACS |
| beurat: | 2 pon |
| Bahan: | PC / PA66 / Tambaga |
Bantahan: The Vortex Plug NACS to CCS adapter is exclusively intended for CCS1-enabled electric vehicles using the North American Charging Standard (NACS) to access NACS DC fast chargers.
Kéngingkeun deui dukungan
- Peryogi bantosan?
- Pikeun pangropéa, ngalayanan, atanapi ngagantian,
- Punten wartosan tim dukungan kami ku nyeken kode QR atanapi ngirim email ka kami contact@ev-lectron.com
- www.ev-lectron.com
- Didamel di Cina
FAQ
Q: Naon anu kuring tiasa laksanakeun upami cuaca panas teuing nyababkeun kasalahan ngecas?
A: Let the charger and adapter cool down for about 30 minutes before retrying.This is a built-in safety feature.
Q: Kumaha cara kuring ngaktipkeun Tesla Supercharger upami plug-and-charge teu jalan?
A: Anggo aplikasi Charge Assist dina setélan onboard kendaraan anjeun pikeun ngamimitian ngecas sacara manual.
Q: Naon anu kudu dilakukeun upami kabel Supercharger pondok teuing pikeun ngahontal EV kuring?
A: Pangecas tungtung-baris nawiskeun langkung seueur rohangan. Upami diperlukeun, ngeusian dua tempat sareng ngecas salami jam-jaman luar-puncak nalika langkung seueur pangecas sayogi.
Q: Is the Vortex Plug UL certified? Will it be certified by Tesla or OEMs?
A: The Vortex Plug is UL2252 compliant. While we engage with automakers and labs like UL and ETL, Tesla does not currently guarantee third-party adapter compatibility. Contact Tesla for the latest information.
Q: Can I use the Vortex Plug in Canada?
A: Yes, you can use the Vortex Plug in the United States and Canada.
Q: What charging output can I expect with the Vortex Plug?
A: Tesla Superchargers deliver DC power directly to the battery via the adapter. The Vortex Plug is rated for 500A and 1,000V.
Q: Does Tesla guarantee compatibility with the Vortex Plug?
A: We actively engage with most OEMs and automakers to ensure the compatibility and reliability of the Vortex Plug. Tesla does not guarantee third-party adapter compatibility. For the latest information, please contact Tesla directly.
Q: What safety features does the Vortex Plug have?
A: The Vortex Plug includes locking mechanisms on both the NACS and CCS sides to prevent accidental disconnection.
Q: Can I use the Vortex Plug with Level 2 Tesla Chargers or Mobile Connectors?
A: Henteu, Lectron Vortex Plug mangrupikeun adaptor DC anu dirancang sacara éksklusif pikeun panggunaan anu aman sareng Supercharger wungkul. Pikeun ngecas EV anjeun di Level 2 Tesla Chargers, kami nyarankeun Tesla ka adaptor J1772. Adaptor ieu cocog sareng Tesla High Powered Wall Connectors, Destination Chargers sadaya generasi, sareng Mobile Connectors.
Q: Naha kuring tiasa nganggo Vortex Plug pikeun ngaksés tingkat 2 ngecas di Tesla Destination Chargers atanapi Mobile Connectors?
A: No, the Vortex Plug is designed for Superchargers only. For Level 1 or Level 2 charging, use the Lectron Tesla to J1772 adapter, compatible with Tesla Wall Connectors, Destination Chargers, and Mobile Connectors.
Dokumén / Sumberdaya
 |
LECTRON Supercharger to CCS1 Vortex Plug with Interlock [pdf] Manual pamaké Supercharger to CCS1 Vortex Plug with Interlock, CCS1 Vortex Plug with Interlock, Plug with Interlock, with Interlock |