MAPER Wiver High Performance Wireless Pangimeutan Kaayaan Sensor Manual Pamaké

Q: What battery type should I use for the WIVER sensor?

We recommend using 2x AA alkaline batteries, specifically Energizer E91 Max or Duracell MN1500, or 2x Energizer L91 (AA Lithium) for best performance.

Q: What is the operating temperature range of the WIVER sensor?

The WIVER sensor can operate in temperatures ranging from -30°C to 100°C.

eusi nyumput

1 MAPER Wiver High Performance Wireless Sénsor pangimeutan kaayaan

2 Leuwihview

3 ciri teknis

4 Ciri pangukuran

5 Spésifikasi Lapisan Fisik Radio

6 spésifikasi:

7 Pernyataan FCC

8 Pernyataan Paparan Radiasi

9 Kontak

10 Patarosan anu sering ditaroskeun

11 Dokumén / Sumberdaya

11.1 Rujukan

MAPER Wiver High Performance Wireless Sénsor pangimeutan kaayaan

Ngeunaan MAPER
MAPER mangrupikeun produsén solusi ngawaskeun kaayaan industri. Kusabab 2015, kami geus fokus kana ngamekarkeun sensor nirkabel inovatif tur sistem monitoring nu mantuan ngajaga reliabilitas asset jeung ngaoptimalkeun operasi industri. Markas kami di Mexico City imah puseur R & D urang jeung fasilitas manufaktur utama, dimana urang ngarancang jeung ngahasilkeun rentang pinuh ku solusi monitoring MAPER, kaasup kulawarga sensor Wiver sarta sistem pakait.

Inpormasi perusahaan
WIVER TECNOLOGIA INDUSTRIAL S.A. DE C.V.
LIBERTAD 118, PEDREGAL DEL CARRASCO, COYOACAN, 04700 CIUDAD DE MEXICO, MEXICO

Leuwihview

WIVER is a high-performance wireless condition monitoring sensor. Coupled with MAPER’s Asset and Process Health Platform, it can provide smart insights on asset health by measuring tri-axial vibration and temperature. Its multiple configuration options allow condition monitoring of diverse machines, including highly intermittent assets which are difficult to diagnose with competing products. Multiple WIVERs can be automatically synchronized for simultaneous measurement of a given asset. MAPER offers multiple versions: WIVER standard (optimized for the most common assets in industry) and WIVER FS for highly intermittent machines. Each of these can also be configured according to the operation ambient rating: standard, HT (high temperature – up to 100°C continuous operation) and Ex for explosive atmospheres.

Easy installation in 15’.
NFC allows single-touch configuration using a cell phone.1
Multiple mounting options (adhesive base, mounting fins, screw mount, etc.)2
Highly configurable for diverse machine types
Periodic acceleration and velocity RMS value measurement
Periodic spectrum measurement
Magnetometer3 for diagnosing electrical faults.
Wireless synchronization
Long wireless range
Long battery life and easy battery replacement
Regular alkaline AA batteries for ease of procurement
Accurate timestamping allows event correlation with plant processes
Internal health monitoring4 tracks the sensor’s own condition.

2023Q2
Contact MAPER Applications for more details.
2023Q2
Contact MAPER Applications for more details.

ciri teknis

Parameter	Kaayaan tés	Min	Tip	Max	Unit
Vibration – Wiver HF
Rentang		± 2		± 16	g
Sampling frequency (fS)		0.2		26.67	kHz
Maximum spectral frequency (fMAX)		0.1		13.33	kHz
Spectral resolution (Df)		0.01⁵			Hz
Sensitivity variation over temperature			0.013	0.025	% / ° C
Kasalahan sensitipitas	@ 50Hz	-2	0	2	%
Frekuensi akurasi		-0.03		0.03	%
Bandwidth (-3dB)	Horizontal, Vertical, Axial		6300		Hz
Geuning			70		μg Hz-1/2
Spectral lines	no overlap	100		13333
Jandéla		Hann, Hamming, Datar-Top, Rectangular, BH
Tumpang tindih		0		100	%
RMS report period ⁵		2	15		menit
Spectral report period ⁵		2	6		jam
Suhu
Akurasi⁶	-10°C nepi ka 60°C	-3		3	°C
Akurasi⁶	elsewhere	-3.5		3.5	°C
Batré jeung konsumsi kakuatan
Jenis Batré	non-Ex version	2x AA (LR6) alkaline, 1.5V⁷
Jenis Batré	Vérsi ex	2x Energizer L91 (AA Lithium)⁸
Lilana⁹	Aplikasi #1¹⁰ – non-Ex		36		bulan
	Aplikasi #2¹¹ – non-Ex		18		bulan
	Application #1 – Ex		30		bulan
	Application #2 – Ex		15		bulan
Environmental and mechanical
Suhu operasi		-30		100¹²	°C
Peunteun IP			IP68
Ukuran	diaméterna			50	mm

Low-RPM configuration, compatible with fMAX <= 200Hz. Standard configuration: f >= 1Hz for all fMAX. Contact MAPER for details. 6 Subject to mounting condition.

MAPER recommends Energizer E91 Max or Duracell MN1500.
Use only recommended battery make and model.
Duration is highly dependent on machine intermittency, measurement configuration (periodicity, type and length of measurement, synchronization configuration), proximity to MAPER Gateway, network load, RF environment, and other environmental conditions such as ambient temperature. MAPER defines duration based on standard applications.
Application #1: machine which runs 24/7, 4 synchronized Wiver sensors on the same machine, configured for rms measurements every 20’ and 1 spectrum every 4hs. Contact MAPER Applications for more details.

Application #2: machine which runs intermittently, 4 unsynchronized Wiver sensors on the same machine, configured for rms measurements every 15’ and 1 spectrum every 3hs. Contact MAPER Applications for more details.
Value for WIVER HT. For standard operating environment configuration, max ambient temperature is 60°C. Do not confuse ambient temperature with base temperature.

	Panjangna¹³			115	mm
Beurat¹⁴				341	g
Bahan dasarna		Beusi sténless
Bahan cangkang		PP, abu-abu tembus
Nirkabel
Rentang¹⁵			70		M
Operating frequency (TX and RX)		915		925	MHz
EIRP				50	mW
Protokol komunikasi	Physical Layer: IEEE802.15.4-2015 O-QPSK PHY (DSSS modulation) Modulasi: O-QPSK Channel Bandwidth: 850kHz @ -6dB (ANSI C63.10-2020 11.8.1 Opt 1) Jarak Saluran: 2MHz Power Spectral Density: < -6 dBm/3kHz (ANSI C63.10-2020 11.10.3)
NFC	Dynamic NFC Tag tipe 5 (pasif) Protocol: ISO/IEC 15693 Frékuénsi Operasi: 13.56 MHz Communication Range: Up to 1.5 cm Data Rate: Up to 53 Kbit/s
Waktos nyata
Waktosamp akurasi		-3		3	s

Ciri pangukuran

Wiver nyayogikeun kamampuan ngawaskeun geter sareng suhu anu komprehensif. Pikeun analisa geter, sénsor nyandak pangukuran dina rentang dinamis anu lega tina ± 2g dugi ka ± 16g kalayan s.amplaju ling nepi ka 26.67 kHz. Hal ieu ngamungkinkeun analisis spéktral lengkep nepi ka 13.33 kHz, kalawan resolusi 0.01 Hz pikeun idéntifikasi komponén tepat.
The device ensures measurement reliability through multiple technical features. Temperature stability is maintained with sensitivity variation under 0.025%/°C, while measurement accuracy is guaranteed by ±2% sensitivity error and ±0.03% frequency accuracy. The tri-axial sensor provides a 6300 Hz bandwidth on all axes, with a low noise floor of 70 μg Hz-1/2 ensuring clean signal capture.

kalenturan analisis kahontal ngaliwatan parameter configurable. Pamaké tiasa milih tina sababaraha pilihan windowing kalebet Hann, Hamming, Flat-Top, Rectangular, sareng Blackman-Harris. Resolusi spéktral adjustable nepi ka 13,333 garis kalawan tumpang tindihna customizable ti 0-100%. Jadwal ngalaporkeun tiasa disaluyukeun sareng kabutuhan aplikasi, kalayan nilai RMS sayogi unggal 2-15 menit sareng data spéktral unggal 2-6 jam.
Mounted on machine with standard base.
With 2x AA batteries, base (mounted on machine) not included.

Range is highly dependent on location and RF environment (eg. clearance to metallic objects, presence of walls/ceilings) and installation of the MAPER Gateway.

Temperature monitoring covers the full industrial range from -30°C to 100°C. Measurement accuracy is optimized for standard operating conditions (-10°C to 60°C) at ±3°C, with ±3.5°C accuracy maintained across the extended range. This ensures reliable temperature tracking across all operating conditions.

Spésifikasi Lapisan Fisik Radio

Sensor Wiver ngagunakeun lapisan IEEE 802.15.4-2015 O-QPSK PHY kalayan modulasi Direct Sequence Spread Spectrum (DSSS). Konfigurasi ieu nyayogikeun komunikasi nirkabel anu kuat dina lingkungan industri:

The Offset Quadrature Phase-Shift Keying (O-QPSK) modulation, combined with DSSS, offers excellent interference resistance and efficient spectrum usage

2MHz channel spacing allows for 5 non-overlapping channels in the 915-925 MHz band, centered at 916…924MHz
Channel bandwidth of 850kHz at -6dB provides sufficient data throughput while maintaining spectral efficiency

Maximum EIRP of 50mW enables reliable communication range while meeting regulatory requirements
Power spectral density below -6 dBm/3kHz ensures minimal interference with adjacent channels and other systems

Palaksanaan ieu ngamungkinkeun pangiriman data sensor anu dipercaya sanajan dina lingkungan RF anu nangtang bari ngajaga efisiensi kakuatan pikeun umur batre anu panjang.

Spésifikasi Interface NFC
Alat ieu kalebet Dynamic NFC Tag Tipe 5 nerapkeun ISO / IEC 15693 pikeun konfigurasi sareng pangropéa alat:

spésifikasi:

Dinamis Tag Type 5 with passive operation
ISO/IEC 15693 protocol support
Frékuénsi operasi: 13.56 MHz
Communication range: Up to 1.5 cm
Data transfer rate: Up to 53 Kbit/s

Antarbeungeut ieu ngamungkinkeun konfigurasi alat saderhana nganggo smartphone atanapi tablet anu sanggup NFC. Operasi pasip teu merlukeun daya batre pikeun tugas konfigurasi.

Rincian sertifikasi atmosfir ngabeledug

Sensor WIVER-Ex disertipikasi pikeun atmosfir ngabeledug. Aranjeunna sasuai jeung standar handap:

IEC60079-0: ed. 6.0 (2011-06)
IEC60079-11: ed. 6.0 (2011-06)
IEC60079-26: ed. 6.0 (2011-06)
Certificate issuer: Bureau Veritas
Certificate number: BVA 23.0002X (Certificate upon request, contact MAPER for more information)

Sénsor WIVER-Ex dipeunteun saperti kieu:

Ex abdi Ma
Ex nyaéta IIC T4 Ga
Ex ia IIIC T150°C Da -20°C ≤ Ta ≤ 60°C

Nyirian
The WIVER-Ex sensors are marked as follows:

The WIVER-Ex sensors may be installed in the following zones

Zona	Grup	Kelas suhu
Tambang	I	–
0, 1, 2	IIA, IIB, IIC	T4
20, 21, 22	IIIA, IIIB, IIIC	T150°C

Suhu lingkungan: -20°C nepi ka 60°C

Catetan pikeun aplikasi gas
WIVER-Ex tiasa dipasang dina zona ieu:
– Zone 0: explosive gas atmosphere is present continuously or for long periods or frequently.

– Zone 1: explosive gas atmosphere is likely to occur periodically or occasionally in normal operation.
– Zone 2: explosive gas atmosphere is not likely to occur in normal operation but, if it does occur, it will exist for a short period only.

pikeun grup gas handap:

Gas group IIA: Atmospheres containing propane, or gases and vapors of equivalent hazard.
Gas group IIB: Includes group IIA gases plus atmospheres containing ethylene, or gases and vapors of equivalent hazard.
Gas group IIC: Includes group IIB gases plus atmospheres containing acetylene or hydrogen, or gases and vapors of equivalent hazard.

klasifikasi suhu:

T1: 450°C
T2: 300°C
T3: 200°C
T4: 135°C

Catetan pikeun aplikasi lebu

WIVER-Ex tiasa dipasang dina zona ieu:
Zone 20: explosive dust atmosphere is present continuously or for long periods or frequently.
Zone 21: explosive dust atmosphere is likely to occur periodically or occasionally in normal operation.
Zone 22: explosive dust atmosphere is not likely to occur in normal operation but, if it does occur, it will exist for a short period only. for the following dust groups:
Dust group IIIA: Atmospheres containing combustible flyings.
Dust group IIIB: Includes group IIIA dusts plus atmospheres containing non-conductive dust.
Dust group IIIC: Includes group IIIC dusts plus atmospheres containing conductive dust.
Suhu Permukaan maksimum pikeun Aplikasi Debu nyaéta 150°C.

Instalasi jeung perawatan

Pamasangan kedah dilaksanakeun saluyu sareng masalah panganyarna tina standar ieu:
IEC 60079-14: Explosive atmospheres – Electrical installations design, selection and erection.
IEC 60079-10-1: Explosive atmospheres – Classification of areas. Explosive gas atmospheres.
IEC 60079-10-2: Explosive atmospheres – Classification of areas. Explosive dust atmospheres.
Pamasangan, pangropéa sareng operasi alat ieu kedah dilaksanakeun ku tanaga anu mumpuni wungkul.
Alatna teu kedah dirobih.
Pikeun ngahindarkeun akumulasi muatan éléktrostatik, bersihkeun ukur nganggo iklanamp lawon.
Ngan batré anu disatujuan anu kedah dianggo: modél Energizer L91
Inspeksi visual disarankeun unggal 6 bulan, pikeun pariksa integritas sareng nyirian sareng integritas alat.

Pernyataan FCC

Alat ieu saluyu sareng Bagian 15 Aturan FCC. Operasi tunduk kana dua kaayaan ieu:

Alat ieu moal ngabalukarkeun gangguan anu ngabahayakeun, sareng
Alat ieu kedah nampi sagala gangguan anu katampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.

Parobahan atawa modifikasi kana Unit ieu teu dinyatakeun disatujuan ku pihak jawab minuhan bisa batal wewenang pamaké pikeun beroperasi alat.

CATETAN: Alat ieu geus diuji sarta kapanggih matuh ka wates pikeun alat digital Kelas B, nurutkeun Bagian 15 Aturan FCC. Watesan ieu dirarancang pikeun nyayogikeun panyalindungan anu wajar tina gangguan anu ngabahayakeun dina pamasangan padumukan. Alat ieu ngahasilkeun panggunaan sareng tiasa mancarkeun énergi frekuensi radio sareng, upami henteu dipasang sareng dianggo saluyu sareng petunjuk, tiasa nyababkeun gangguan anu ngabahayakeun kana komunikasi radio. Nanging, teu aya jaminan yén gangguan moal lumangsung dina pamasangan khusus. Upami alat ieu nyababkeun gangguan anu ngabahayakeun kana panarimaan radio atanapi televisi, anu tiasa dipastikeun ku cara mareuman sareng ngaktipkeun alat, pangguna didorong pikeun nyobian ngabenerkeun gangguan ku salah sahiji atanapi langkung tina ukuran ieu:

Reorient atawa mindahkeun anteneu panarima.
Ningkatkeun separation antara alat jeung panarima.
Sambungkeun alat-alat kana stop kontak dina sirkuit béda ti nu disambungkeun ka panarima.

Taroskeun ka dealer atanapi teknisi radio/TV anu berpengalaman pikeun pitulung.

Alat ieu sareng anteneuna henteu kedah ditempatkeun atanapi dioperasikeun sareng anteneu atanapi pamancar anu sanés.

Pernyataan Paparan Radiasi

Alat parantos dievaluasi pikeun nyumponan sarat umum paparan RF dina kaayaan paparan portabel tanpa larangan.

Kontak

Rojongan Téknis: +52 81 340607 34
Surélék: aplicaciones@mapertech.com
Websitus: www.mapertech.mx

Patarosan anu sering ditaroskeun

What battery type should I use for the WIVER sensor?