Hartosna ogé IRM-01 Series 1W Single Output Encapsulated Tipe
Émbaran produk
- The IRM-01 series is a 1W single-output encapsulated type power supply suitable for a wide range of applications.
- It features a universal AC input, ensuring compatibility across different regions.
- The power supply is designed with a focus on energy efficiency, with minimal no-load power consumption.
Parentah Pamakéan Produk
- Ensure that the power supply is disconnected from the power source before installation.
- Connect the input terminals to the appropriate AC power source based on the input voltage syarat.
- Sambungkeun terminal kaluaran ka alat nu merlukeun kakuatan.
Precautions Kasalametan
- Do not exceed the maximum load capacity of the power supply.
- Keep the power supply away from moisture and heat sources to prevent damage.
- If there are any signs of damage or malfunction, discontinue use immediately.
Pangropéa
- Regularly inspect the power supply for any signs of wear or damage.
- Keep the power supply clean and free from dust to maintain optimal performance.
Fitur
- Universa) AC input/ Full range
- Taya konsumsi kakuatan beban <0.075W
- Ukuran kompak
- Sasuai jeung BS EN/EN55032 Kelas B tanpa komponén tambahan
- Protections: sirkuit pondok / Overload / Leuwih-voltage
- Cooling ku convection hawa bébas
- Isolation Class ll
- Reliabiliti tinggi, béaya rendah
- 3 taun jaminan
Aplikasi
- Parabot listrik industri
- Parabot mékanis
- parabot automation pabrik
- Alat éléktronik handheld
KODE GTIN
- Milarian MW: https://www.meanweII.com/serviceGTlN.aspx
Katerangan
- IRM-OI is an IW miniature (33.7*22.2*15mm) AC-DC module-type power supply, ready to be soldered onto the PCB boards of various kinds of electronic instruments or industrial automation equipments.
- This product allows a universal input voltage range of 8+305VAC.
- The phenolic case and potted with silicone enhance the heat dissipation and meet the anti-vibration demand up to 5G; moreover, it provides the fundamental resistance to dust and moisture.
- With the high efficiency up to 77% and the extremely low no-load power consumption below 0.075W, the IRM-OI series fulfills the worldwide regulation for the low power consumption requirement for electronics.
- The entire series is a Class II design (no FG pin), incorporating the built-in EMI filtering components, enabling compliance with BS EN/EN55032 Class B; the supreme EMC features keep the end electronic units from electromagnetic interference.
- In addition to the module-type model, the IRM-OI series also offers the SMD style model.
Encoding Modél
SPESIFIKASI
| MODEL | IRM-01-3.3 | IRM-01-5 | IRM-01-9 | IRM-01-12 | IRM-01-15 | IRM-01-24 | |
| OUTPUT | DC VOLTAGE | 3.3V | 5V | 9V | 12V | 15V | 24V |
| DIPANGERAN AYEUNA | 300mA | 200mA | 111mA | 83mA | 67mA | 42mA | |
| AYEUNA jajaran | 0 ~ 300mA | 0 ~ 200mA | 0 ~ 111mA | 0 ~ 83mA | 0 ~ 67mA | 0 ~ 42mA | |
| DIPANGERAN POWER | 1W | 1W | 1W | 1W | 1W | 1W | |
| RIPPLE & GORENG (maks.) Catetan.2 | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 200mVp-p | |
| VOLTAGE TOLERANSI Catetan.3 | ± 2.5% | ± 2.5% | ± 2.5% | ± 2.5% | ± 2.5% | ± 2.5% | |
| GARIS PERATURAN | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | |
| MUAT PERATURAN | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | |
| DISETÉL, NAEH WAKTU | 600ms, 30ms/230VAC 600ms, 30ms/115VAC dina beban pinuh | ||||||
| TAHAN UP WAKTU (Jenis.) | 40ms / 230VAC 12ms / 115VAC dina beban pinuh | ||||||
| INPUT | VOLTAGE jajaran | 85 ~ 305VAC 120 ~ 430VDC | |||||
| Frékuénsi jajaran | 47 ~ 63Hz | ||||||
| EFISIENSI (Jenis.) | 66% | 70% | 72% | 74% | 75% | 77% | |
| AC AYEUNA (Jenis.) | 25mA/115VAC 18mA/230VAC 16mA/277VAC | ||||||
| INSUR AYEUNA (Jenis.) | 5A / 115VAC 10A / 230VAC | ||||||
| Bocorak AYEUNA | <0.25mA/277VAC | ||||||
| PANGJAGAAN | LEWET | ≥110% dipeunteun kakuatan kaluaran | |||||
| Jinis panyalindungan: Modeu hiccup, pulih sacara otomatis saatos kaayaan sesar dipiceun | |||||||
| LEUWIH VOLTAGE | 3.8 ~ 4.9V | 5.2 ~ 6.8V | 10.3 ~ 12.2V | 12.6 ~ 16.2V | 15.7 ~ 20.3V | 25.2 ~ 32.4V | |
| Jinis panyalindungan: Pareuman o/p voltage, clamping by a zener diode | |||||||
| LINGKUNGAN | KERJA TEMP. | -30 ~ +85 ℃ (Tingali "Kurva Derating") | |||||
| KERJA Asor | 20 ~ 90% RH henteu kondensasi | ||||||
| PENYIMPANAN TEMP., Asor | -40 ~ + 100 ℃, 10 ~ 95% RH | ||||||
| TEMP. KOEFISIEN | ± 0.03% / ℃ (0 ~ 75 ℃) | ||||||
| GETERAN | 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along the X, Y, Z axes | ||||||
| Ngajual SUHU | Gelombang soldering: 265 ℃, 5s (max.); Solder manual: 390 ℃, 3s (max.); Reflow soldering (gaya SMD): 240 ℃, 10s (max.) | ||||||
| Kasalametan & EMC | Kasalametan STANDAR | UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 , BSMI CNS15598-1 approved, Design refer to BS EN/EN61558-1/-2-16 | |||||
| TAHAN VOLTAGE | I / PO / P: 3KVAC | ||||||
| ISOLASI RESISTANCE | I / PO / P: 100M Ohms / 500VDC / 25 ℃ / 70% RH | ||||||
| EMC EMISI | Patuh kana BS EN/EN55032 (CISPR32) Kelas B, BS EN/EN61000-3-2,-3, EAC TP TC 020, CNS15936 Kelas B | ||||||
| EMC IMUNITAS | Patuh kana BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, tingkat industri beurat (surge LN: 1KV), EAC TP TC 020 | ||||||
| LAIN | MTBF | 13571.4K WIB mnt. Telcordia SR-332 (Bellcore); 1960.2K jam mnt. MIL-HDBK-217F (25 ℃) | |||||
| DIMENSI | PCB mounting style : 33.7*22.2*15mm (L*W*H) SMD style : 33.7*22.2*16mm (L*W*H) | ||||||
| PACKING | PCB mounting style : 0.024Kg; 640pcs/ 16.3 Kg/ 0.84CUFT SMD style : 0.024Kg; 640 pcs/ 16.3 Kg/ 0.84CUFT | ||||||
| CATETAN | 1. Sadaya parameter NOT husus disebutkeun diukur dina input 230VAC, dipeunteun beban, sarta 25 ℃ suhu ambient.
2. Ripple & noise diukur dina 20MHz rubakpita ku ngagunakeun 12″ twisted pasangan-kawat terminated ku 0.1uf & 47uf kapasitor paralel. 3. Tolerance: includes setup tolerance, line regulation, and load regulation. 4. Suhu ambient derating of 3.5 ℃ / 1000m kalawan model fanless na tina 5 ℃ / 1000m kalawan model kipas keur operasi luhurna leuwih luhur ti 2000m (6500ft). ※ Bantahan Tanggung Jawab Produk: Kanggo inpormasi anu lengkep, mangga tingal https://www.meanwell.com/serviceDisclaimer.aspx |
||||||
Blok Diagram
Kurva Derating
Ciri statik
Diménsi
Spésifikasi mékanis
- (Unit: mm[inci], Kasabaran: ± 0.5[±0.02])
Disarankeun Layout PCB (pikeun gaya SMD) (Metoda soldering Reflow sadia)
Catetan: Kurva manglaku ngan pikeun "Hot Air Reflow Soldering"
Manual instalasi
- Mangga tingal: http://www.meanwell.com/manual.html
FAQ
- Q: Dupi abdi tiasa make catu daya runtuyan IRM-01 kalawan outlet internasional?
- A: Yes, the universal AC input feature allows for compatibility with various international power outlets.
- Q: Naon periode jaminan pikeun suplai kakuatan runtuyan IRM-01?
- A: The warranty period for the IRM-01 series power supply is one year from the date of purchase.
Dokumén / Sumberdaya
 |
Hartosna ogé IRM-01 Series 1W Single Output Encapsulated Tipe [pdf] Buku Panduan Pamilik IRM-01-12S, IRM-01-20250110, IRM-01 Runtuyan 1W Output Tunggal Encapsulated Type, 1W Output Tunggal Encapsulated Type, Output Encapsulated Type, Encapsulated Type |