QANBA RUBY Arcade Controller Instruction Manual

QANBA RUBY Arcade Controller

Katerangan

1. switch kasaluyuan
2. Click Switch
3. Modeu Saklar
4. Indikator kakuatan
5. Tombol Imah
6. Port kabel USB-C
7. Turbo LED
8. MF LED
9. Tombol Turbo
10. Tombol MF
11. Tombol deui
12. Tombol ngamimitian
13. Tombol aksi
14. USB Dongle
15. Tombol reset

Operasi produk

Connecting to Host Devices

Connect to a PC, mobile phone, or other devices

Sambungan kabel

• Pastikeun alat dihurungkeun.
• Connect the USB-C cable (A) to the device (the R1 power indicator will light up).
• Use the Compatibility Switch (1) to select Xinput (default), Android, or Dinput mode.

Connecting to Host Devices

Connect to a PC, mobile phone, or other devices

Sambungan nirkabel

• Pastikeun alat dihurungkeun.
• Insert the USB Dongle (14) into the device.
• Use the Compatibility Switch (1) to select Xinput (default), Android, or Dinput mode.
• Press the Home Button (5) to power on and reconnect to the USB Dongle.
  • Smart TV / PC / Laptop / Tablet / Mobile Phone / TV Box
  • Ordinateur portable
  • PC
  • Smart TV/PC/ Laptop/Tablet
  • TV inteligente/PC

Repairing the Controller with the USB Dongle

• If the connection is lost or the USB Dongle (14) is replaced, press and hold USB Dongle button (B) on the USB Dongle (14) and insert it into the USB port of the host device.
• After removing the USB Dongle (14), reinsert it into the USB port of the host device without pressing USB Dongle button (B) again to complete pairing with the powered-on Ruby controller.

Catetan:
If the Ruby controller does not need to be paired with the USB Dongle (14) again, do not press and hold the USB Dongle button (B) on the USB Dongle (14) when plugging in or removing the receiver.

Sambungkeun Alat

kakuatan LED

Sambungan Kabel USB

• Connect the USB Type‑C to USB Type‑A cable (A) to the USB-C cable port (6) for power. The power indicator (4) will light up.
• When the battery is low, the power indicator (4) flashes slowly to indicate charging after connecting the USB Type‑C to USB Type‑A cable (A) to the USB-C cable port (6) for power. The indicator remains solid once fully charged.

2.4G Wireless Connection Mode

• Press the HOME button (5) to power on and start searching. The power indicator (4) will flash. Once pairing with the USB Dongle (14) is successful, the indicator will remain solid.
• When using the R1 device, the power indicator (4) will flash to indicate a low battery and that charging is required.

Catetan: Do not connect the USB cable in 2.4G wireless mode; otherwise, the device will switch to USB cable mode by default. The device will automatically power off if no connection is made within 2 minutes of turning on, or if there is no operation within 10 minutes after a successful connection.

USB Dongle (14) Indicator

In 2.4G wireless connection mode: 

• The indicator on the USB Dongle (14) flashes while searching and stays lit when pairing is successful.
• The indicator is off when the USB Dongle (14) is not paired.

RESET Button (15)

1. Press the RESET button (15) to power on the device.
2. Press the RESET button (15) to restore the Ruby controller from update mode to normal controller mode.

BACK/C Mode Selection

• When the Click switch (2) is set to the Back position, the Back button (11) is enabled (default), and the Action Button C (13) is disabled.
• When the Click switch (2) is set to the C position, the Action Button C (13) is enabled, and the Back button (11) is disabled.

MODE (Joystick Direction Mode Selection)

• When the mode switch (3) is set to the DP position, D-Pad (DP) mode is enabled (default).
• When the mode switch (3) is set to the LS position, Left Stick (LS) mode is enabled.

Catetan: Some retro emulators only support the LS function. If the joystick does not respond, please switch the direction mode.

Tombol TURBO

• Each of the A/B/X/Y/R1/L1/R2/L2/R3/L3 action buttons (13) can be switched among three turbo modes:
• Turbo Off (default) – LED (7) Off
• Press Turbo – LED (7) flashes red while the button is pressed
• Auto Turbo – LED (7) flashes continuously
• Press and hold the TURBO button (9) together with one or more action buttons (13), then release to cycle through the three turbo modes.

Catetan

• The ▲/▼/◀/▶ directional buttons cannot be set to the turbo function.
• The turbo function has no memory. All turbo settings will be cleared automatically when the USB wired connection is disconnected or the device is powered off wirelessly.

Tombol MF

• With the MF LED (8) off (factory default), the four directional buttons operate in center‑reset mode:
• Press ◀ and ▶ (13) at the same time to reset to the center.
• Press ▲ and ▼ (13) at the same time to reset to the center.
• Press the MF button (10) to turn on the MF LED (8). The four directional buttons will switch to last‑input priority mode:
• The later‑pressed ◀/▶ or ▲/▼ directional button (13) overrides the earlier‑held one.
• Hold ▶ then press ◀: output is ◀.
• Hold ◀ then press ▶: output is ▶.
• Hold ▼ then press ▲: output is ▲.
• Hold ▲ then press ▼: output is ▼.
  • Catetan: MF settings are not saved. After disconnecting the USB cable or entering 2.4G sleep mode, the device will automatically return to the default center‑reset mode with the MF indicator off..

Operasi

• Ngaran produk
  
  • QANBA RUBY Arcade Controller
• Modél
  
  • R1
• Saklar mikro
  
  • Low-profile silent switches
• Diménsi
  
  • 330 mm x 226 mm x 23 mm / 13.0 inci x 8.9 inci x 0.9 inci
• Beurat
  
  • 0.81 kg / 1.79 lbs
• Panjang Kabel USB
  • 2 m / 6.56 ft

Parentah ngecas

• Charge via the USB port on a computer, or use the wired mode to charge while playing.
• Use a standard charger with 5V, 1–2A output.

minuhan

This product complies with the following regulatory information and safety tests:

• USB 2.0 patuh
• FCC: Alat ieu saluyu sareng Bagian 15 Aturan FCC. Operasi tunduk kana dua kaayaan ieu:

1. Alat ieu moal ngabalukarkeun gangguan anu ngabahayakeun.
2. Alat ieu kedah nampi sagala gangguan anu katampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.

Peringatan, Kasalametan, sareng Garansi

• Baca manual instruksi ieu taliti.
• Do not use alcohol or liquids to clean this product; use a dry cloth instead.
• Do not disassemble the interior.
• When not in use, unplug this product and store the USB cable to prevent tripping hazards.
• This product in a cool, dry place away from liquids, fumes, and chemicals.
• Do not leave this product in hot climates, such as in the trunk of a car, for a long time on a hot summer day.
• Do not stack other items on top of this product.
• Commercial use of this prcduct is prohibited.
• The design and specifications of this product are subject to change without prior notice.
• The pr«luct is not suitable for children under 12 years old.
• Mangga tetep manual ieu pikeun rujukan gampang.
• QANBA CN TECH will repair or replace prcxluct at its discretion 12 months from purchase date.

rojongan customer

• Telepon: +86 755 29171459
• Surélék: info@qanba.com

Pernyataan FCC

Alat ieu saluyu sareng bagian 15 tina Aturan FCC. Operasi tunduk kana dua kaayaan di handap ieu: (1) Alat ieu teu tiasa nyababkeun gangguan anu ngabahayakeun, sareng (2) alat ieu kedah nampi gangguan anu ditampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong. Sagala parobahan atawa modifikasi teu dinyatakeun disatujuan ku pihak jawab minuhan bisa batal wewenang pamaké pikeun beroperasi alat.

CATETAN: Alat ieu geus diuji sarta kapanggih matuh ka wates pikeun alat digital Kelas B, nurutkeun Bagian 15 Aturan FCC. Watesan ieu dirarancang pikeun nyayogikeun panyalindungan anu wajar tina gangguan anu ngabahayakeun dina pamasangan padumukan. Alat ieu ngahasilkeun, ngagunakeun, sareng tiasa mancarkeun énergi frekuensi radio sareng, upami henteu dipasang sareng dianggo saluyu sareng petunjuk, tiasa nyababkeun gangguan anu ngabahayakeun kana komunikasi radio. Nanging, teu aya jaminan yén gangguan moal lumangsung dina pamasangan khusus. Upami alat ieu nyababkeun gangguan anu ngabahayakeun kana panarimaan radio atanapi televisi, anu tiasa dipastikeun ku cara mareuman sareng ngaktipkeun alat, pangguna didorong pikeun nyobian ngabenerkeun gangguan ku salah sahiji atanapi langkung tina ukuran ieu:

• Reorient atawa mindahkeun anteneu panarima.
• Ningkatkeun separation antara alat jeung panarima.
• Sambungkeun alat-alat kana stop kontak dina sirkuit béda ti nu disambungkeun ka panarima.
• Taroskeun ka dealer atanapi teknisi radio/TV anu berpengalaman pikeun pitulung.

Alat parantos dievaluasi pikeun nyumponan sarat paparan RF umum. Alatna tiasa dianggo dina kaayaan paparan portabel tanpa larangan.

Pamérésan masalah

• Controller not connecting wirelessly: Ensure the USB Dongle (14) is properly plugged into the host device. If the controller was previously paired, try re-pairing it by pressing the USB Dongle button (B) on the dongle.
• Controller teu ngabales: Check if the controller is powered on (press the RESET button 15). If using wirelessly, ensure the battery is charged. If using a USB cable, ensure it’s securely connected.
• Joystick not working in an emulator: Try switching the joystick direction mode between D-Pad (DP) and Left Stick (LS) using the MODE switch. Some emulators only support one mode.
• Fungsi turbo teu jalan: Ensure you are not trying to set turbo on directional buttons. Remember that turbo settings are cleared upon disconnection or power off.
• Controller powers off automatically: The device will automatically power off if no connection is made within 2 minutes of turning on, or if there is no operation within 10 minutes after a successful connection. Reconnect or press a button to wake it up.