QUIN D420D Label Printer
TIPS PRO
- Unggal waktos Anjeun ngarobah labél, mangga ngajalankeun idéntifikasi labél otomatis.
- Pencét tombol feed dina printer pikeun ngalangkungan labél kosong.
- Double click the feed button to print a test page.
- Hindarkeun labél kualitas goréng sabab tiasa ngaruksak printer.
- Rutin ngabersihan sirah citak.
- If the paper is jammed and the red light is flashing slowly, run the automatic label identification.
- Selapkeun Printer Label kana port USB anu sami dina komputer anjeun unggal waktos. Ieu bakal nyegah nyieun duplikat salinan printer dina sistem operasi Anjeun.
FAQ
Q: Bluetooth won’t connect (using a phone as an example)
- Standard troubleshooting steps:
- Update the Labe life app to the latest version.
- Restart the printer and the app.
- Keep your phone within 10 meters of the printer, and ensure no other device is connected to it..
- Test with another phone.
- Phone detects the printer in Bluetooth settings, but the app doesn’t:
- Unpair the printer in your phone’s Bluetooth settings →
Restart the printer Search again in the app.
- Unpair the printer in your phone’s Bluetooth settings →
- Neither the phone nor the app can find the printer:
- Reset the printer:
Turn it off→ Hold down the Feed button→ While holding it, turn the
printer on → Release the button when the red light flashes →
Wait for the blue light to stay on. - Balikan deui telepon anjeun sareng cobian deui.
- Reset the printer:
Q: Printing stops and the red light flashes
The printer requires paper calibration.
Please turn the printer off and on, then hold the Feed button for 3 seconds to re-calibrate.
Q: Blank Print
The label paper may not be properly installed, or it is not thermal label paper.
Punten:
- Place the printing side facing up.
- Use thermal paper.
Q: Incomplete Print
The label size setting may not match the paper size.
Punten:
- Set the label size in the app to match the actual label dimensions
(e.g. 4×6 in/4×8 in) and reprint. - Download the Labe life App for custom editing.
Catetan: For more help, scan the QR code on the printer or visit the official website for tutorials.
LAMPU STATUS LED
| Caang | Status printer |
 Biru padet |
Siaga sareng Siap |
 Biru kedip-kedip |
Ngareureuhkeun percetakan |
 Beureum padet |
Panutup teu ditutup |
 Beureum kedip-kedip |
Labél jams atanapi kasalahan deteksi labél |
 Ungu kedip-kedip |
sirah print overheating |
 Ungu solid |
Nyitak |
TOMBOL Eupan
| Peta anu dipikahoyong | palaksanaan |
| Skip labél | When the printer is standby and ready (not in the middle of printing), press the feed button once. |
| Nyitak halaman tés | Insert the label, ensure it is straight and smooth. When the printer is standby, Double click the feed button. |
| Jalankeun idéntifikasi labél otomatis | Insert the label, ensure it is straight and smooth. When the printer is standby, press and hold the feed button for about 3 seconds. Then release the feed button. |
| Ngareureuhkeun percetakan | Nalika printer keur nyitak, pencét tombol feed sakali. |
| Nyitak neruskeun | Nalika printer ngareureuhkeun percetakan, pencét tombol feed sakali pikeun neruskeun percetakan. |
| Balikkeun setelan pabrik | Insert the label, ensure it is straight and smooth. Turn off the printer. Press and hold the feed button, and turn on the printer at the same time. After the red light flashes 5 times, then release the feed button, |
| Kalibrasi sénsor (pikeun labél anu aya tanda hideung) | Insert the label, ensure it is straight and smooth. Turn off the printer. Press and hold the Feed Button, and turn on the printer at the same time. Wait until the red light changes to blue, then release the Feed Button immediately. |
| Kalibrasi sénsor (pikeun labél anu aya jurang) | Insert the label, ensure it is straight and smooth, Restart the printer. when the printer is standby (The light should be solid blue), press and hold the Feed Button for about 3 seconds. Wait until the light changes to purple, release the Feed Button immediately. |
BATAL Kancing
 |
|
| Fungsi | Cancel the print job |
| Operasi | During printing, press once to cancel the remaining print job. |
PERHATOSAN Kasalametan
- Sirah citak tiasa panas pisan saatos nyitak labél. Ulah noél sirah print.
- Ulah ngabengkokkeun kabel kakuatan kaleuleuwihan atawa nempatkeun objék dina ari.
- Entong nganggo panyitak upami anjeun mendakan panyimpangan sabab ieu tiasa nyababkeun kahuruan atanapi kejutan listrik.
- Jauhkeun printer tina jangkauan barudak.
- Paké ngan asesoris disatujuan tur ulah coba mun ngabongkar, ngalereskeun unit ku sorangan.
- Jauhkeun printer tina cai jeung objék séjén nu bisa nembus komponén.
- Mangga cabut colokan printer lamun teu dipake keur lila.
ISED Warning statement:
Alat ieu ngandung pamancar/panarima anu dibebaskeun lisénsi anu saluyu sareng RSS anu dibebaskeun lisénsi Inovasi, Élmu sareng Pangwangunan Ékonomi Kanada.
Operasi tunduk kana dua kaayaan ieu:
- Alat ieu moal ngabalukarkeun gangguan.
- Alat ieu kedah nampi gangguan naon waé, kalebet gangguan anu tiasa nyababkeun operasi alat anu henteu dipikahoyong.
Pernyataan paparan ISED RF:
This equipment complies with ISED Radiation exposure limit set forth for uncontrolled environment.
Alat ieu kedah dipasang sareng dioperasikeun kalayan jarak minimal 20cm antara produk sareng awak anjeun.
PERHATOSAN FCC
Alat ieu saluyu sareng bagian 15 tina Aturan FCC. Operasi tunduk kana dua kaayaan ieu:
(1) Alat ieu henteu tiasa nyababkeun gangguan anu ngabahayakeun, sareng (2) alat ieu kedah nampi gangguan anu ditampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.
Sakur Parobahan atanapi modifikasi anu henteu disatujuan sacara dinyatakeun ku pihak anu tanggung jawab pikeun patuh tiasa ngabatalkeun otoritas pangguna pikeun ngoperasikeun alat.
CATETAN: Alat-alat ieu parantos diuji sareng dipendakan pikeun cocog sareng wates pikeun alat digital Kelas A, numutkeun ka Bagéan 15 tina Aturan FCC. Watesan ieu didesain kanggo nyayogikeun panyalindungan anu lumayan ngalawan gangguan anu ngabahayakeun nalika alat-alat éta dioperasikeun di lingkungan komérsial. Alat-alat ieu ngahasilkeun, ngagunakeun, sareng tiasa memancar énergi frékuénsi radio sareng, upami henteu dipasang sareng dianggo saluyu sareng instruksi manual, tiasa nyababkeun gangguan komunikasi komunikasi radio. Operasi alat-alat ieu di daérah padumukan sigana bakal ngalantarankeun gangguan anu ngabahayakeun anu pangguna bakal diperyogikeun pikeun menerkeun gangguan ku biaya nyalira.
Pernyataan paparan FCC RF:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body.
Dokumén / Sumberdaya
 | D420D Label Printer |
Rujukan
- Manual pamakémanual.tools