Elexant 450c-Modbus
Modbus Protocol Interface Mapping
Vérsi firmware V2.1.1
1. BUBUKA
Manual ieu rinci ngeunaan registers Modbus tina Raychem Elexant 450c-Modbus. Hal ieu dimaksudkeun pikeun dipaké ku integrators sistem pamaké 'anu hayang panganteur sareng alat éksternal maranéhanana (ie DCS atawa sistem manajemen Gedong -BMS- sistem) kana ngagunakeun protokol Modbus. Manual ieu ngawengku rinci ngeunaan konfigurasi sistem urang ayeuna, sumberdaya kasadiaan, set-up parameter, kaayaan ayeuna, status alarem, info log sarta sababaraha titik data tetep sarta variabel lianna.
1.1 Kumaha Ngagunakeun Manual Ieu
Register Elexant 450c-Modbus tiasa diaksés ku sistem DCS atanapi BMS. Sanajan kitu, ieu ngan kudu dipigawé ku pamaké ahli anu ngarti yén sistem ngagunakeun widang semafor éksténsif pikeun assure sinkronisasi antara kamungkinan sababaraha pamaké jeung parentah conflicting. Bagian ieu tina peta ngadaptar Modbus nyadiakeun aksés ka ayeuna set-up jeung nilai real time keur diukur ku sistem. A snap shot tina kaayaan ayeuna, data keur trending, status alarem, setelan ayeuna keur thresholds alarem jeung setpoints bisa gampang dibaca tanpa resiko kana kinerja sistem.
Sakabéh peta ngadaptar Modbus kaasup dina dokumén ieu pikeun completeness. Nulis kana pangkalan data aya dina kamampuan kalolobaan alat host Modbus. Nanging, kami nyarankeun pisan yén integrator sistem anu nyerat kana pangkalan data kedah nguji sacara saksama sistemna pikeun mastikeun yén éta jalanna leres sareng henteu aya akibat anu teu dihaja.
1.2 Modbus Komunikasi
Controller tindakan minangka alat budak Modbus. Hiji alat master modbus bisa maca jeung nulis ka controller nu. Ieu ngamungkinkeun kamungkinan pikeun ngawas, ngonpigurasikeun sareng view alarm jarak jauh. Protokol anu dianggo nyaéta Modbus RTU via RS485.
| Variabel | Katerangan | Default | rentang / pilihan |
| Alamat | Modbus Station Alamat dipaké pikeun ngaidentipikasi controller. | 1 | 1 nepi ka 247 |
| Baud | Laju data dimana komunikasi lumangsung dina jaringan serial. | 9600 | 2400, 4800, 9600, 19200 |
| Paritas | Parity Nangtukeun tipe bit parity nu bakal dipaké kalawan salah sahiji tilu palabuhan komunikasi serial. | Euweuh | Teu aya, Ganjil, Komo |
| Eureun Bit | Nangtukeun jumlah bit eureun dipaké kalawan salah sahiji tilu palabuhan komunikasi serial. | 1 | 1,2 |
Ingkar host nyaéta:
- Alamat Modbus: 1
- Laju Baud: 9600
Konfigurasi baku nyaéta: 8 bit data, euweuh parity na hiji eureun bit.
The dip switch (handap terminal 26 jeung 27):
| Tombol | Résistor |
| 1 – | Tarik handap résistor |
| 2 – | Tarik nepi résistor |
| 3 – | Résistor terminasi |
Pencét tombol ka ON (sakumaha nunjukkeun panah) sisi bakal nyambungkeun résistor anu aya.
2. PETA ngadaptar MODBUS
2.1 Alarm Status Coils
Kodeu Fungsi Modbus: 1
Alamat Mimiti Modbus: 0
Ukuran Blok Modbus: 17
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar |
| Alarm TS 1 luhur | 0 | 1 | 0 = euweuh alarm, 1 = alarem |
| Low TS 1 Alarm | 1 | 1 | 0 = euweuh alarm, 1 = alarem |
| TS 1 Kagagalan | 2 | 1 | 0 = euweuh alarm, 1 = alarem |
| TS luhur 2 | 3 | 1 | 0 = euweuh alarm, 1 = alarem |
| TS handap 2 | 4 | 1 | 0 = euweuh alarm, 1 = alarem |
| TS 2 Kagagalan | 5 | 1 | 0 = euweuh alarm, 1 = alarem |
| Kasalahan internal | 15 | 1 | 0 = euweuh kasalahan internal, 1 = kasalahan internal |
| Status Alarm Panel | 16 | 1 | 0 = euweuh alarm, 1 = alarem |
2.2 Parameter Setup Controller
Kodeu Fungsi Modbus: 1,5,15
Alamat Mimiti Modbus: 145
Ukuran Blok Modbus: 9
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar |
| TS1 Mode Gagal | 145 | 1, 5, 15 | 0 = Gagal pareum, 1 = Gagal dina |
| TS2 Mode Gagal | 146 | 1, 5, 15 | 0 = Gagal pareum, 1 = Gagal dina |
| Program tés | 147 | 1, 5, 15 | 0 = henteu, 1 = enya, program uji jalan |
| Alarm Buzzer | 148 | 1, 5, 15 | 0 = henteu, buzzer pareum 1 = enya, buzzer hurung |
| TS1 fitur alarem tinggi pareum | 149 | 1, 5, 15 | 0 = alarm aktip, 1 = alarm nonaktipkeun |
| TS1 fitur alarem tinggi pareum | 150 | 1, 5, 15 | 0 = alarm aktip, 1 = alarm nonaktipkeun |
| TS1 fitur alarem low pareum | 151 | 1, 5, 15 | 0 = alarm aktip, 1 = alarm nonaktipkeun |
| TS1 fitur alarem low pareum | 152 | 1, 5, 15 | 0 = alarm aktip, 1 = alarm nonaktipkeun |
| Panel Alarem Control | 153 | 1, 5, 15 | 0 = alarm nonaktipkeun, 1 = alarm aktip |
2.3 Status controller
Kodeu Fungsi Modbus: 2
Alamat Mimiti Modbus: 3
Ukuran Blok Modbus: 3
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar |
| Kaluaran Pindah Atah1 | 3 | 2 | 0 = HC1 relay kaluar, 1 = HC1 relay on |
| Status konci konci | 4 | 2 | 0 = henteu, 1 = enya, dikonci |
| Kaluaran Pindah Atah2 | 5 | 2 | 0 = HC2 relay kaluar, 1 = HC2 relay on |
2.4 Parameter INPUT
Kodeu Fungsi Modbus: 3, 6, 16
Alamat Mimiti Modbus: 0
Ukuran Blok Modbus: 20
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Kontrol Suhu Setpoint 1 | 0 | 3, 6, 16 | 0°C nepi ka 80°C (0°C nepi ka 245°C pikeun PT100) | °C | ka-10* |
| Ukuran Pipa Minimum PASC 2 | 1 | 3, 6, 16 | 10, 15, 20, 25, 32, 40, 50, 60, 70, 80, 100, 125 lamun nilai 25 dipaké | DN | 1 |
| Pindah Modeu Kontrol | 2 | 3, 6, 16 | 4 = Garis/Garis, 5 = PASC/PASC, 6 = Garis/PASC, 7 = PASC/Garis, 8 = Garis/OFF, 9 = PASC/OFF, 10 = OFF/Garis, 11 = OFF/PASC, 12 = OFF / OFF |
– | 1 |
| Bandéra maot 1 | 3 | 3, 6, 16 | 1.0°C nepi ka 5°C | °C | ka-10* |
| Suhu Ambient Minimum PASC 1 | 4 | 3, 6, 16 | -40°C nepi ka 0°C | °C | ka-10* |
| Ukuran Pipa Minimum PASC 1 | 5 | 3, 6, 16 | 10, 15, 20, 25, 32, 40, 50, 60, 70, 80, 100, 125 lamun nilai 25 dipaké | DN | 1 |
| PASC Power Saluyukeun | 6 | 3, 6, 16 | 70,80,90,100,110,120,130,140 | % | 1 |
| Setup sénsor | 7 | 3, 6, 16 | bit 1 = TS 1 napelkeun pikeun Circuit 1 bit 2 = TS 2 napelkeun pikeun Circuit 1 bit 5 = TS 1 napelkeun pikeun Circuit 2 bit 6 = TS 2 napelkeun pikeun Circuit 2 bit 0,3,4,7 = NA 0 = Henteu (Teu pilih) 1 = Leres (Pilih) |
– | 1 |
| Basa | 8 | 3, 6, 16 | 0 = DANIS, 1 = Jérman, 2 = Walanda, 3 = Inggris, 4 = PERANCIS, 5 = ITALIAN, 6 = Swédia, 7 = NORWEGIA, 8 = FINLANDIA, 9 = RUSIA, 10 = Ceko, 11 = Polandia |
– | 1 |
| Nagara | 9 | 3, 6, 16 | 0 = Jérman, 1 = AUSTRIA, 2 = SWITZERLAND, 3 = UK, 4 = PERANCIS, 5 = ITALIA, 6 = POLANDIA, 7 = CZECH_REPUBLIK, 8 = Dénmark, 9 = Bélgia, 10 = RUSIA, 11 = CHINA, 12 = JEPANG, 13 = Swédia, 14 = NORWAY, 15 = LITHUANIA, 16 = Slovakia, 17 = Walanda, 18 = FINLANDIA, 19 = Irlandia |
– | 1 |
| Tipe kabel 1 | 10 | 3, 6, 16 | 0 = 10XL2_ZH, 1 = 15XL2_ZH, 2 = 26XL2_ZH, 3 = 31XL2_ZH, 4 = FS_C10_2X, 5 = LAIN |
– | 1 |
| Tipe kabel 2 | 11 | 3, 6, 16 | 0 = 10XL2_ZH, 1 = 15XL2_ZH, 2 = 26XL2_ZH, 3 = 31XL2_ZH, 4 = FS_C10_2X, 5 = LAIN |
– | 1 |
| Bandéra maot 2 | 12 | 3, 6, 16 | 1.0°C nepi ka 5°C | °C | ka-10* |
| Tanggal-Taun | 13 | 3, 6, 16 | 00 – 99 | taun | 1 |
| Tanggal-Bulan | 14 | 3, 6, 16 | 1 – 12 | bulan | 1 |
| Tanggal-Poé | 15 | 3, 6, 16 | 1 – 31 | poé | 1 |
| Waktos-Jam | 16 | 3, 6, 16 | 0 – 23 | jam | 1 |
| Waktos-Menit | 17 | 3, 6, 16 | 0 – 59 | menit | 1 |
| Kontrol Suhu Setpoint 2 | 18 | 3, 6, 16 | 0°C nepi ka 80°C (0°C nepi ka 245°C pikeun PT100) | °C | ka-10* |
| Suhu Ambient Minimum PASC 2 | 19 | 3, 6, 16 | -40°C nepi ka 0°C | °C | ka-10* |
* Suhu ditampilkeun dina 1/10 ° C (misampsuhu: 10°C = 100)
2.5 Parameter sénsor suhu
Kodeu Fungsi Modbus: 3, 6, 16
Alamat Mimiti Modbus: 20
Ukuran Blok Modbus: 4
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Titik Set Alarm TS 1 Tinggi** | 20 | 3, 6, 16 | 2°C – 90°C (2°C nepi ka 250°C pikeun PT100) |
°C | ka-10* |
| Setpoint Alarm TS 1 Rendah** | 21 | 3, 6, 16 | -40°C – 78°C (-40°C nepi ka +245°C pikeun PT100) |
°C | ka-10* |
| Titik Set Alarm TS 2 Tinggi** | 22 | 3, 6, 16 | 2°C – 90°C (2°C nepi ka 250°C pikeun PT100) |
°C | ka-10* |
| Setpoint Alarm TS 2 Rendah** | 23 | 3, 6, 16 | -40°C – 78°C (-40 ° C nepi ka 245 ° C pikeun PT100) |
°C | ka-10* |
* Suhu ditampilkeun dina 1/10 ° C (misampsuhu: 10°C = 100)
** Bisa ditumpurkeun ngaliwatan bagian 2.2
2.6 Override
Kodeu Fungsi Modbus: 3, 6, 16
Alamat Mimiti Modbus: 34
Ukuran Blok Modbus: 2
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Status Override Jauh 1 | 34 | 3, 6, 16 | 0 = Override teu aktip 1 = Angkatan on Override aktip 2 = Force off Override aktip |
– | – |
| Status Override Jauh 2 | 35 | 3, 6, 16 | 0 = Override teu aktip 1 = Angkatan on Override aktip 2 = Force off Override aktip |
– | – |
2.7 Idéntifikasi Controller Tag
Kodeu Fungsi Modbus: 3, 6, 16
Alamat Mimiti Modbus: 90
Ukuran Blok Modbus: 10
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Idéntifikasi Controller Tag | 90 nepi ka 99 | 3, 6, 16 | Huruf(AZ) angka(0-9), /.()_-# Dua karakter per alamat. String terminators = Null atawa spasi Catetan: LSByte of 99 salawasna Null. Lebetkeun kodeu ascii pikeun karakter di luhur, contonaample, input 0x4142 (Hex atawa 16706 dina Dec) pikeun register 90, jeung 0x3031 (dina Hex atawa 12337 dina Dec) pikeun register 91, lajeng ID controller bakal AB01. |
– | – |
2.8 Parameter konsol
Kodeu Fungsi Modbus: 3, 6, 16
Alamat Mimiti Modbus: 120
Ukuran Blok Modbus: 2
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Kodeu aksés konci | 120 | 3, 6, 16 | 1 nepi ka 9999: Input kodeu aksés anu salah bakal dipaliré, sareng input anu leres bakal valid salami 2 menit. (dipaké pikeun ngasupkeun kodeu pikeun muka konci aksés pikeun ngadaptar 121) |
– | – |
| Konci Aktipkeun / Nonaktipkeun | 121 | 3, 6, 16 | 0 = Konci teu aktip, 1 = Keylock aktip |
– | – |
2.9 Parameter sénsor suhu
Kodeu Fungsi Modbus: 3, 6, 16
Alamat Mimiti Modbus: 147
Ukuran Blok Modbus: 1
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Kagiatan Komunikasi Time-out | 147 | 3, 6, 16 | Dipaké pikeun beban shedding sarta override jauh 0-255 | sek | 1 |
2.10 Émbaran Umum Controller
Kodeu Fungsi Modbus: 4
Alamat Mimiti Modbus: 0
Ukuran Blok Modbus: 4
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Tipe Alat | 0 | 4 | Nilai tetep = 450 | – | 1 |
| Vérsi firmware | 1 | 4 | Firmware Vérsi-Major 0-255 | – | 1 |
| Vérsi firmware | 2 | 4 | Firmware Vérsi-Minor 0-255 | – | 1 |
| Vérsi firmware | 3 | 4 | Firmware Vérsi-Bangunan 0-255 | – | 1 |
2.11 Status Kaluaran dinamis
Kodeu Fungsi Modbus: 4
Alamat Mimiti Modbus: 50
Ukuran Blok Modbus: 15
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Kontrol Kaluaran Kawajiban Daur 1 | 50 | 4 | 0 = pinuh off, 100 = pinuh on | % | 1 |
| Tracing Control Status | 51 | 4 | 2 digit, kahiji pikeun sirkuit 1 jeung kadua pikeun sirkuit 2 (pikeun example, 0 hartina duanana normal, 15 hartina sirkuit 1 = gaya pareum, sirkuit 2 = gaya on) 0 = kontrol suhu normal 1 = kaluaran override gaya pareum 2 = program tés lumangsung 5 = kaluaran override gaya on |
– | 1 |
| PASC On-Count 1 | 52 | 4 | sek | 1 | |
| PASC Pareum-Itung 1 | 53 | 4 | sek | 1 | |
| PASC Salajengna Jumlah Pindah 1 | 54 | 4 | sek | 1 | |
| PASC Persen Dina 1 | 55 | 4 | 0 = pinuh off, 100 = pinuh on | % | 1 |
| Kaayaan Kaluaran PASC 1 | 56 | 4 | 0 = Pareum, 1 = Hurung | – | 1 |
| PASC Total Waktos 1 | 57 | 4 | sek | 1 | |
| Kontrol Kaluaran Kawajiban Daur 2 | 58 | 4 | 0 = pinuh off, 100 = pinuh on | % | 1 |
| PASC On-Count 2 | 59 | 4 | sek | 1 | |
| PASC Pareum-Itung 2 | 60 | 4 | sek | 1 | |
| PASC Salajengna Jumlah Pindah 2 | 61 | 4 | sek | 1 | |
| PASC Persen Dina 2 | 62 | 4 | 0 = pinuh off, 100 = pinuh on | % | 1 |
| Kaayaan Kaluaran PASC 2 | 63 | 4 | 0 = Pareum, 1 = Hurung | – | 1 |
| PASC Total Waktos 2 | 64 | 4 | sek | 1 |
2.12 Bacaan Analog
Kodeu Fungsi Modbus: 4
Alamat Mimiti Modbus: 81
Ukuran Blok Modbus: 2
Jumlah Blok: 1
| Katerangan | Alamat Modbus | Fungsi | Koméntar | Hijian | Skala |
| Ayeuna TS 1 Suhu | 81 | 4 | TS 1 gagalna = +3000.0°C TS 1 teu dipaké = +3200.0°C | °C | ka-10* |
| Ayeuna TS 2 Suhu | 82 | 4 | TS 2 gagalna = +3000.0°C TS 2 teu dipaké = +3200.0°C | °C | ka-10* |
* Suhu ditampilkeun dina 1/10 ° C (misampsuhu: 10°C = 100)
2.13 Bantahan
Inpormasi peta MODBUS milik sareng rahasia. Pamakéan informasi ieu diijinkeun solely guna nerapkeun link komunikasi antara parabot customer jeung Controllers Raychem. Éta henteu tiasa dianggo pikeun tujuan anu sanés, sareng éta henteu kedah diungkabkeun ka pihak ka-3 tanpa idin tinulis ti Chemelex Thermal LLC.
Bélgia / Bélgia
Telepon +32 16 21 35 02
Fax +32 16 21 36 04
SalesBelux@chemelex.com
Bulgaria
Telepon +359 2 973 33 73
SalesEE@chemelex.com
Česká Republika
Telepon +420 606 069 618 (Comm)
+420 602 232 969 (Ind)
infoCZ@chemelex.com
Danmark
Telepon +45 70 11 04 00
SalesDK@chemelex.com
Deutschland
Tel 0800 181 82 05
SalesDE@chemelex.com
Spanyol
Telepon +34 911 59 30 60
Fax +34 900 98 32 64
SalesES@chemelex.com
Perancis
Tél 0800 90 60 45
SalesFR@chemelex.com
Hrvatska
Telepon +385 51 225 073 (Comm)
+385 1 605 01 88 (Ind)
SalesEE@chemelex.com
Italia
Telepon +39 02 577 61 51
Fax +39 02 577 61 55 28
SalesIT@chemelex.com
Lietuva/Latvija/Eesti
Telepon +370 698 411 56
SalesEE@chemelex.com
Magyarország
Telepon +36 1 253 76 17
SalesHU@chemelex.com
Walanda
Tel 0800 022 49 78
SalesNL@chemelex.com
Norge
Telepon +47 66 81 79 90
SalesNO@chemelex.com
Österreich
Tel 0800 29 74 10
SalesAT@chemelex.com
Polska
Telepon +48 22 331 29 50
Fax +48 22 331 29 51
SalesPL@chemelex.com
Казахстан
Telepon +7 7112 31 67 03170
SalesKZ@chemelex.com
Sérbia jeung Monténégro
Telepon +386 41 665 634 (Comm)
+381 230 439 519 (Ind)
SalesEE@chemelex.com
Schweiz / Suisse / Svizzera
Telepon +41 (41) 766 30 80
Fax +41 (41) 766 30 81
infoCH@chemelex.com
Suomi
Puh 0800 11 67 99
SalesFI@chemelex.com
Sverige
Telepon +46 31 335 58 00
SalesSE@chemelex.com
Turki
Telepon +90 545 284 09 05
SalesEE@chemelex.com
Inggris / Irlandia
Telepon 0800 969 013
SalesUK@chemelex.com
©2025 Chemelex. Sadaya tanda sareng logo Chemelex dipiboga atanapi dilisensikeun ku Chemelex Europe GmbH atanapi afiliasina. Sadaya merek dagang anu sanés mangrupikeun hak milik nu gaduhna. Chemelex ngagaduhan hak ngarobih spésifikasi tanpa aya bewara.
RAYCHEM-OM-EU1850-Elexant450cModbus-ML-2504
Dokumén / Sumberdaya
 |
Raychem Elexant 450c-Modbus Modbus Protocol Interface Mapping [pdf] Manual pamaké NGC-UIT3-EX, EU1850-Elexant450cModbus-ML-2504, Elexant 450c-Modbus Protocol Interface Mapping, Elexant 450c-Modbus, Protocol Interface Mapping, Protocol Interface Mapping, Interface Mapping, Mapping |