TECH CONTROLLERS EU-R-8s Plus Wireless Room Controller

spésifikasi

• Power supply: Battery-powered
• rentang adjustment suhu: Teu dieusian
• Kasalahan pangukuran: Teu dieusian
• Humidity measurement range: Not specified
• Frékuénsi operasi: Teu dieusian

Panjelasan Produk
The EU-R-8s Plus room regulator is designed for controlling heating devices. It works in conjunction with zone controllers and communicates wirelessly. The main function is to maintain the set room temperature by sending signals to the heating device when the desired temperature is achieved. Available in white or black color options, the controller features a large display, glass front panel, built-in temperature sensor, humidity sensor, floor sensor (optional), time heating program, manual mode, heating/cooling options, battery level indicator, signal strength display, pre-set temperature setting, and button lock function.

Parentah Pamakéan Produk

1. Émbaran tampilan:
   The current temperature is shown on the screen. Press EXIT to switch between temperature and humidity screens.
2. Modeu Manual:
   Adjust the pre-set temperature manually on the main screen using the buttons. To exit manual mode, hold the EXIT button.
3. Konci Tombol:
   Press Menu, select Loc function, choose yes or no for button lock, confirm by waiting 5 seconds or pressing Menu. To unlock buttons, hold both buttons until the padlock icon disappears.

KARTU HARANSI

• Téhnologi STEROWNIKI II Sp. z oo parusahaan ensures ka Meuli operasi ditangtoskeun tina alat pikeun periode 24 bulan ti tanggal diobral. Penjamin bakal ngalereskeun alat gratis upami cacad lumangsung kusabab kasalahan produsén. Alatna kedah dikirimkeun ka produsénna. Prinsip ngalaksanakeun dina kasus keluhan nu ditangtukeun ku Act on istilah husus jeung kaayaan diobral konsumen jeung amandemen tina Code Sipil (Journal of Laws of 5 September 2002).

PERHATOSAN! THE TEMPERATURE SENSOR CANNOT BE IMMERSED IN ANY LIQUID (OIL ETC). THIS MAY RESULT IN DAMAGING THE CONTROLLER AND LOSS OF WARRANTY! THE ACCEPTABLE RELATIVE HUMIDITY OF THE CONTROLLER’S ENVIRONMENT IS 5÷85% REL.H. WITHOUT THE STEAM CONDENSATION EFFECT.  THE DEVICE IS NOT INTENDED TO BE OPERATED BY CHILDREN.

• Activities related to setting and regulation of the controller parameters described in the Instruction Manual and parts wearing out during normal operation, such as fuses, are not covered by warranty repairs. The warranty does not cover damages arising as a result of improper operation or through the user’s fault, mechanical damage or damage created as a result of fire, flood,  atmospheric discharges, overvoltage or short-circuit. The interference of an unauthorized service, wilful repairs, modifications and construction changes cause the loss of Warranty. TECH controllers have protective seals. Removing a seal results in the loss of Warranty. The costs of uan njustifiable service call to a defect will be borne exclusively by the buyer. The unjustifiable service call is defi ned as a call to remove damages not resulting from the Guarantor’s fault as well as a call considered unjustifiable by the service after diagnosing the device (e.g. damage of the equipment through the fault of the client or not subject to Warranty), or if the device defect occurred for reasons lying beyond the device. In order to execute the rights arising from this Warranty, the user is obliged, at his own cost and risk, to deliver the device to the Guarantor along with a correctly filled-in warranty card (containing in particular the sale date, the seller’s signature and a description of the defect) and sales proof (receipt, VAT invoice, etc.). The Warranty Card is the only basis for repair free of charge. The complaint repair time is 14 days. When the Warranty Card is lost or damaged, the manufacturer does not issue a duplicate.

Kasalametan

• Saméméh ngagunakeun alat pikeun kahiji kalina, pamaké kudu maca aturan di handap taliti. Teu nurut kana aturan nu kaasup dina manual ieu bisa ngakibatkeun tatu pribadi atawa karuksakan controller. Manual pamaké kudu disimpen dina tempat anu aman pikeun rujukan salajengna. Pikeun ngahindarkeun kacilakaan sareng kasalahan, éta kedah dipastikeun yén unggal jalma anu nganggo alatna parantos familiarized kana prinsip operasi ogé fungsi kaamanan controller. Upami alatna badé dijual atanapi ditempatkeun di tempat anu béda, pastikeun yén manual pangguna aya sareng alat éta supados saha waé calon pangguna ngagaduhan aksés kana inpormasi penting ngeunaan alat éta.
• Pabrikan henteu nampi tanggung jawab pikeun tatu atanapi karusakan anu disababkeun ku lalawora; kituna, pamaké wajib nyandak ukuran kaamanan diperlukeun didaptarkeun dina manual ieu ngajaga kahirupan jeung harta maranéhanana.

PERHATOSAN

• Alatna kedah dipasang ku tukang listrik anu mumpuni.
• Regulator teu dimaksudkeun pikeun dipaké ku barudak.
• Sagala pamakéan lian ti dieusian ku produsén dilarang.

We are committed to protecting the environment. Manufacturing electronic devices imposes an obligation of provide for environmentally safe disposal of used electronic components and devices. Hence, we have been entered into a register kept by the Inspection For Environmental Protection. The crossed-out bin symbol on a product means that the product may not be disposed of to household waste containers. Recycling of wastes helps to protect the environment. The user is obliged to transfer their used equipment to a collection point where all electric and electronic components.

Déklarasi EU ngeunaan conformity
Hereby, we declare under our sole responsibility that EU-R-8s Plus manufactured by TECH STEROWNIKI II Sp. z o.o., head-quartered in Wieprz Biała Droga 31, 34-122 Wieprz, is compliant with Directive 2014/53/EU of the European parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment, Directive 2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products as well as the regulation by the MINISTRY OF ENTREPRENEURSHIP AND TECHNOLOGY of 24 June 2019 amending the regulation concerning the essential requirements as regards the restriction of the use of certain hazardous substances in electrical and electronic equipment, implementing provisions of Directive (EU) 2017/2102 of the European Parliament and of the Council of 15 November 2017 amending Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (OJ L 305, 21.11.2017, p. 8). For compliance assessment, harmonized standards were used:

• PN-EN IEC 60730-2-9:2019-06 art. 3.1a Kasalametan pamakéan
• PN-EN 62479:2011 seni. 3.1 a Kasalametan pamakéan
• ETSI EN 301 489-1 V2.2.3 (2019-11) art.3.1b kasaluyuan éléktromagnétik
• ETSI EN 301 489-3 V2.1.1:2019-03 art.3.1 b Kasaluyuan éléktromagnétik
• ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Pamakéan spéktrum radio anu épéktip sareng koheren
• ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Pamakéan spéktrum radio anu épéktip sareng koheren
• EN IEC 63000: 2018 RoHS

DATA Téknis

CATETAN
Regulator ieu Powered by accu - eta disarankeun pikeun pariksa accu ti jaman ka jaman tur ngaganti aranjeunna sahenteuna sakali unggal usum pemanasan.

• Gambar sareng diagram ngan ukur kanggo ilustrasi. Produsén ngagaduhan hak pikeun ngenalkeun sababaraha gantung.

PEDARAN
The EU-R-8s Plus room regulator is intended for controlling the heating device. It cooperates with the zone controllers and communicates with them wirelessly. Its main task is to maintain the pre-set room temperature by sending a signal to the heating device informing that the pre-set temperature has been reached. Colour versions available: white or black Controller features:

• tampilan badag gampang dibaca
• panel hareup dijieunna tina kaca
• sénsor suhu, sénsor kalembaban sareng sénsor lantai (opsional)
• program pemanasan waktos

Suhu ayeuna dipintonkeun dina layar. Pikeun ngalih tina layar suhu ka layar kalembaban, pencét EXIT.

Modeu manual

• The preset temperature may be adjusted manually in the main screen view ngagunakeun tombol  . Holding the EXIT button while in being in manual mode exits this mode.

Konci tombol 

• after pressing the Menu button, the Loc function appears. Use one of the buttons     to select yes or no (enabling / disabling the button lock). In order to confirm, wait for about 5 seconds or press Menu. To unlock the buttons, hold both the buttons  nepi ka ikon padlock leungit.

CARA PASANG REGULATOR

• Regulator kudu dipasang ku jalma mumpuni.
• Diagram di handap ieu ngagambarkeun cara masang elemen khusus:

Diagram di handap ieu ngagambarkeun cara masang sensor lantai:

CARA ngadaptar REGULATOR
In order to register the regulator in the main controller, go to Zones > Registration as described in the manual of the given controller. Next, briefly press the registration button in the EU-R-8s Plus regulator. After reg is displayed, briefly press the registration button again. If the registration process has been successful, SCs appears on the screen. If any errors occurred, the regulator displays Err. In order to register the regulator as a floor sensor, press the registration button twice.

CATETAN

• Pikeun ngadaptarkeun régulator, tombolna kedah dikonci.
• Ngan 1 régulator tiasa ditugaskeun ka hiji zona.
• Regulator teu tiasa unregistered tapi ngan ditumpurkeun.
• Upami pangguna nyobian ngadaptarkeun sénsor dina zona anu béda, sénsor éta henteu kadaptar ti zona munggaran sareng kadaptar dina zona anu sanés.

Holding the registration button on the controller for a few seconds will enable synchronization and consequently any change in the pre-set temperature in the main controller will automatically result in the same change in the regulator. Without synchronization, a change in the pre-set temperature in the main controller will cause a change in the regulator after a momentary delay. * Holding the registration button while turning the regulator on will calibrate the buttons.

CARA NGAROBAH PRE-SET SUHU
The pre-set temperature in the zone can be changed directly from the EU-R-8s Plus regulator using the buttons . Jang ngalampahkeun ieu, controller kudu didaptarkeun ka controller utama. Lamun regulator mintonkeun Una sanggeus salah sahiji tombol  is pressed, it means that the controller is not registered. It is possible to change the pre-set temperature in the screen view kalayan suhu anu tos disetel sareng ayeuna, nganggo tombol .

• Saatos netepkeun suhu anu dipikahoyong, layar nunjukkeun waktos nalika nilai suhu bakal diterapkeun. Waktos ieu tiasa diédit nganggo tombol .
• Fungsi OFF nganonaktipkeun parameter anu disetél sacara manual sareng hartosna yén setélan hasil tina jadwal mingguan anu disetél dina controller utama bakal diterapkeun.
• Lamun Con geus dipilih, setelan manual bakal nerapkeun permanén paduli setelan jadwal.

Upami suhu anu tos disetel langkung luhur tibatan suhu ayeuna, pemanasan diaktipkeun sareng ikon seuneu nembongan. Ikon ieu henteu dipintonkeun nalika pungsi OFF dipilih.

FUNGSI MENU

Pikeun asup ka menu régulator, TAHAN tombol Menu. Salajengna, pencét tombol ieu pikeun pindah antara fungsi.
Kalibrasi sensor suhu

Pungsi ieu ngamungkinkeun pamaké pikeun pariksa nilai calibration sensor suhu. Kisaran setelan calibration nyaeta -10 ° C nepi ka +10 ° C sarta eta bisa disaluyukeun dina controller utama.

Setélan pabrik
Fungsi Fab ngamungkinkeun pamaké pikeun mulangkeun setélan pabrik. Lamun pilihan ieu geus dipilih, layar mimiti kedip-kedip. Paké tombol pikeun ngarobah angka panungtungan ka 1. Pikeun mastikeun, antosan ngeunaan 5 detik atawa pencét tombol Menu.

Vérsi software
Pungsi ieu ngamungkinkeun pamaké pikeun pariksa versi software ayeuna. Nomer versi diperyogikeun nalika ngahubungi staf jasa.

FAQs

Q: Naon anu kudu dipigawé lamun kuring leungit Kartu Garansi?

A: If the Warranty Card is lost or damaged, the manufacturer does not issue a duplicate. Contact customer support for further assistance.

Q: Sakumaha sering kuring kedah ngagentos batré?

A: It is recommended to check the batteries periodically and replace them at least once every heating season to ensure proper functioning of the regulator.

Dokumén / Sumberdaya

TECH CONTROLLERS EU-R-8s Plus Wireless Room Controller [pdf] Manual pamaké S rie 12, EU-R-8s PLUS, EU-R-8s Plus Wireless Room Controller, EU-R-8s Plus, Wireless Room Controller, Room Controller, Controller

Rujukan

• Manual pamaké