TERIOS T46 Wireless Controller
Parameter
- Masukan voltage: DC 5.0V
- Operasi ayeuna: 45 mA
- Saré ayeuna: 20 uA
- Kapasitas batré: 1000 mAh
- waktos operasi: kira-kira. 12 jam
- beurat: 243 ± 2 g
- waktos ngecas: kira-kira. 3 jam
- Geter ayeuna: kira-kira. 140 mA
- Ngecas ayeuna: kira-kira. 450 mA
- Kabel data: Tipe-C
- Jarak sambungan nirkabel: < 10 m
- ukuran: 162 x 110 x 65 mm
Parentah Pamakéan Produk
Panjelasan Produk
This product is made of durable ABS material with an ergonomic design, is easy to use and has excellent performance. Fully compatible with P4/P4 pro/P4 Slim/PC, equipped with the latest technology Hall Joystick for a top-notch experience without drifting or lagging, built-in speakers, stereo headphone jack, TURBO, dual vibration, and programmable functions. You can also play P4 games on the P5 console, enriching the player’s experience and making it the preferred solution for all game enthusiasts.
Ikon Tombol
sambungan P4
Turn on the P4 console and connect the controller using the Type-C cable, then press the HOME button on the controller to select the user. When the controller is connected to the console, the light bar shows a white light. After selecting the user and pressing the confirmation button, the controller shows the channel light. You can unplug the connection cable and use the joystick wirelessly.
How to reconnect the controller
Press the ‘HOME’ button to turn on the controller, and it will automatically reconnect t the P4 console.
sambungan PC
- The controller supports X-input and P4 wired audio (5th generation game controller) modes. The default is P4 wired audio mode; long-press the SHARE+OPTIONS key for 3 seconds to switch to X-input mode.
- X-input mode display name: Xbox 360 Controller for Windows, the controller lights up green.
- P4 Wired audio mode display name: Wireless Controller, the joystick lights blue.
Hall Joystick
The joystick of this controller applies the Hall effect working principle without physical contact, avoiding the accuracy error caused by physical wear and tear, so there is no carbon film wear and the joystick drift phenomenon. Adopting advanced micro-power consumption technology, it is durable and has a long service life. It is more responsive, and small movements can be accurately reflected in the same with a smaller dead zone.
Joystick percentile switching:
- Long-press the ROCKER button for 2 seconds to switch the rocker mode. The motor vibrates for 1 second, and the channel light flashes the corresponding mode colour for 1 second.
- Dua modeu:
- Display blue: rocker percentile is 6%-10%;
- Display red: rocker percentile is 2%-3%
- Double click the Rocker button, the channel light blinks corresponding to the rocker mode, you can check the Current rocker mode.
- Catetan: Controller Off saves the joystick percentile setting.
Fungsi Programming
Setélan Programming
- Under the connection state of the gamepad, press and hold the TURBO button for 2 seconds. The LED light will flash slowly, then release the button. It will enter the programming mode, and then set the functions of the buttons to be programmed sequentially.
- Then press Fl or F2 key, the gamepad will vibrate briefly for 1 second and the light will be always on, it means programming is successful. @ 24 action buttons can be programmed at one time, after the number exceeds, the LED will flash rapidly to indicate that the action buttons entered again will not be recorded.
- Before programming Fl/F2, make sure the joystick is not set to Cancel Programming, if you can’t enter the programming, long press “OPTIONS+ TURBO for 2 seconds to restore the programming, and then program Fn.
Jelas Programming
- After connecting the handle, press and hold the TURBO button for 5 seconds. The indicator light blinks, and after 5 seconds, it lights up normally, and the motor vibrates for 1 second.
- At this time, the programming function is cleared, and the “Fn” button restores the default: F1=L33, F2=.R.3.
Ngabolaykeun Programming
- After the handle is connected to the host, long press the “OPTIONS+ TURBO” key combination for 2 seconds, the motor will short vibrate for 1 second, the programming function will be canceled successfully.
- Press and hold the ”OPTIONS+TURBO” key combination again for 2 seconds, and the programming function will be resumed.
- Lf any Other button is pressed during the release Of the programming function, the programming function will not be affected, but the Fl and F2 buttons can cancel each other’s function release, except when Fl/F2 is a mapping function (when the programming is an action key, it is a mapping function).
Fungsi TURBO
- Press and hold the TURBO key; then press and hold the key that needs to be assigned for semi-automatic burst. (Keys that can be assigned this function: LI. RI, Q, R2, O, X Press the above key combination again to switch to full-auto burst; press the key combination aqain to cancel the TURBO function of this key. The sequence is: Normal, Semi-Auto, Full-Auto cycle.
- Clear TURBO Press and hold TURBO and ROCKER, handle short vibration for 1 second, clear successfully.
Fungsi mémori
- lf there is no programming operation in the programming mode, the controller will exit the programming mode after 10 seconds and restore the last programming setting; the indicator light stays on.
- Programming key with shutdown memory function: the controller programming is completed, and the last programming function is still retained after shutdown and restart.
Fungsi Jempé
- The controller is connected to the host, insert the headset, press the mute button, the mute button lights up orange, you can turn off the microphone, press it again to open.
- TO open the mute function must be inserted into the headset, pull out the headset, and the mute function is automatically closed;
- Catetan: The mute function can be used only when the P4 console is connected by Bluetooth anthe d PC mode is connected by wire.
Hurungkeun / pareum / ngecas
Reset
If your controller is malfunctioning, such as wrong key presses, dead, or unable to connect, please follow the steps below to reset it:
- Pareuman jeung cabut controller.
- Tangtukeun lokasi tombol Reset dina tonggong controller deukeut tombol programming.
- Pencét tombol nganggo klip kertas leutik anu dibuka atanapi alat leutik (tombolna aya di jero liang leutik).
Catetan Kaamanan
- Please read this manual carefully before use to familiarise yourself with the operation and adjustment.
- Produk teu kedah dibongkar sacara pribadi.
- It is strictly prohibited to put the product in fire or wateravoidvoan id explosion.
- The charging source is a 5V/2A charging cable; non-standard charging equipment does not apply to this product.
Daptar bungkusan
Dokumén / Sumberdaya
 |
TERIOS T46 Wireless Controller [pdf] Instruksi Manual 2BB47-T46, 2BB47T46, t46, T46 Wireless Controller, T46, Wireless Controller, Controller |