Awan Aksés Control Controller
IP401 Awan Aksés Controller
U-PROX IP401
Manual Instalasi sareng Operasi
Hak jeung Protection Maranéhna
Sadaya hak pikeun dokumén ieu dicekel ku Visi Téknis Terpadu Company Limited Liability.
mérek dagang
ITV® jeung U-PROX® mangrupakeun mérek dagang kadaptar ti Company Limited Liability Integrated Visi Téknis.
Ngeunaan Dokumén Ieu
This manual describes the procedure for installing, connecting, and operating the access control system controller U-PROX IP401 (hereinafter “the controller”). Please study these instructions carefully before installing the controller.
The characteristics and parameters of the controller are described in the Characteristics section. The Terminology section explains the terms used in this document.
The external appearance of the controller, along with the description of its contacts and operating modes, is presented in the Description and Operation section. The installation, connection of external devices, and configuration of the controller are described in the Controller Operation section.
Perhatosan!
Before installing and connecting the controller, you must carefully study this manual.
Installation and connection are permitted only by persons or organizations authorized by the manufacturer.
Pelatihan sareng Rojongan Téknis
Kursus-kursus pelatihan anu ngawengku pamasangan sareng panggunaan pangontrol U-PROX IP401 dilaksanakeun ku Visi Téknis Terpadu Company Limited Liability. Kanggo inpormasi tambahan, mangga ngahubungi personel Visi Téknis Terpadu Perusahaan Tanggung Jawab Terbatas dina nomer telepon anu disayogikeun di handap.
Bantosan Téknis:
+38 (091) 481 01 69
support@u-prox.systems
https://t.me/u_prox_support_bot
Pangrojong ieu dimaksudkeun pikeun spesialis anu dilatih. Pamaké tungtung kedah ngahubungi dealer atanapi pamasangna sateuacan ngahontal Visi Téknis Terpadu Perusahaan Tanggung Jawab Terbatas.
Inpo teknis sadia dina websitus: www.u-prox.systems
Sertifikasi
Visi Téknis Terpadu Perusahaan Tanggung Jawab Terbatas nunjukkeun yén U-PROX IP401 saluyu sareng Diréktif Kasaluyuan Éléktromagnétik 2014/30/EU sareng Diréktif 2011/65/EU (RoHS). Déklarasi aslina ngeunaan Conformity sadia dina websitus www.u-prox.systems under the “Certificates” section.
Controller Pedaran
Controller U-PROX IP401 mangrupikeun alat anu dirancang pikeun ngadalikeun aksés ka tempat padumukan sareng industri, ogé pikeun ngarékam waktos sareng acara.
Controller disayogikeun dina kasus anu nganggo tombol touch anu diwangun pikeun pamundut kaluar sareng tanpa modul kakuatan.
Controller tiasa dianggo sareng pamiarsa anu nyambung via antarmuka RS232 (ngan ukur pamiarsa U-PROX) atanapi ngalangkungan antarmuka RS485 nganggo protokol OSDP (seri U-PROX SE atanapi pamiarsa anu cocog sareng OSDP2.2).
U-PROX IP401 ngolah inpormasi anu ditampi ti pamaca sareng, nganggo dua kaluaran, ngagentos alat kaluaran (contona, konci, sirineu, jsb.).
The controller has two fixed-function inputs – a door sensor and an exit request button.
Controller tiasa beroperasi sacara mandiri atanapi salaku bagian tina jaringan. Pikeun ngahijikeun controller dina sistem kontrol aksés, panganteur Wi-Fi (jaringan komputer nirkabel) dipaké.
Controller ngarojong konfigurasi jaringan via Bluetooth Low Energy (BLE) ngagunakeun aplikasi mobile U-PROX Config.
Pembaruan firmware dilakukeun ti server sentral liwat Wi-Fi.
Controller didamel ku sumber 12V.
U-PROX IP401 ngadalikeun panto kalayan hiji pamaca sareng tombol pamundut kaluar. memori non-volatile badag na ngamungkinkeun sistem pikeun ngatur nepi ka 10,000 identifiers.
Solusi téknis sareng desain anu direkayasa sacara saksama, komunikasi via Wi-Fi, mémori anu henteu volatile sareng jam real-time, sareng panyalindungan palabuhan maca tina sirkuit pondok, overvol.tage, sarta polaritasna ngabalikeun ngamungkinkeun controller ieu dipaké dina sagala rupa kontrol aksés jeung sistem manajemen.
Tujuan tina Alat
The Cloud Controller U-PROX IP401 is intended for use as part of access control and management systems of various scales – from small office systems to large enterprises.
Controllers are interconnected via a computer network.
Ciri
Catu daya: Sumber 12V éksternal; konsumsi ayeuna (kalawan beban dipegatkeun) teu leuwih ti 100 mA; ripple voltage teu leuwih ti 500 mV.
Sambungan pamaca:
- RS232 – up to 10 m (for U-PROX contactless identifiers)
- RS485 (OSDP2.2) – up to 1000 m
Inputs: 8 inputs for connecting loops with current monitoring (end resistor – 2.2 kΩ).
Built-in Touch Button: for exit requests.
Input Sinyal éksternal: sensor panto (DC) sareng input pikeun tombol pamundut kaluar (RTE).
Tamper Kontak: pikeun detecting kasus bubuka.
Outputs: one relay (NO/NC, COM) rated at 3 A @ 12V; a transistor open-collector alarm output – 12V, 160 mA.
Panganteur Nirkabel: Wi-Fi 2.4 GHz, 802.11b/g/n, ngarojong Open/WPA/WPA2/WEP.
Awan AC System: U-PROX ACS Awan.
Sistem AC Lokal: U-PROX WEB.
Konfigurasi: Konfigurasi lengkep dilakukeun ngaliwatan sistem kontrol aksés nganggo jaringan komputer.
Jam Real-Time.
Mémori Non-Volatile:
- Identifiers – 10,000
- Events – 47,000
- Time zones – 250
- Weekly schedules – 250
- Holidays – 250
- Temporary identifiers – 1000
terminologi
Identifiers: Dina sistem kontrol aksés, unggal pamaké boga kode unik. Identifiers tiasa dina bentuk kartu plastik, fob konci, jsb.
Reader: Alat anu maca kode identifier sareng nyambung ka controller aksés. Antarbeungeut Wiegand dianggo.
Kodeu PIN: Kodeu diasupkeun ngaliwatan keypad pamaca; bisa jadi identifier mandiri atawa suplement kartu atawa fob konci.
Panto: Titik kontrol aksés (contona, panto, turnstiles). Titik aksés nyaéta unit logis tina sistem.
Titik aksés: Tingali "Lawang".
Passage Point: A logical unit in an access control system that manages passage through a door in one direction, including the reader, controller (or part of it), and the output mechanism.
Doors with a single passage point are one-sided; with two, they are two-sided.
Kaluar Tombol Request: Dipaké pikeun exiting enggon; métode alternatif (misalna tombol konci listrik atawa konci) micu kajadian "PANTO BREACH".
Door Sensor: An input for connecting sensors (magnetic, rotor, etc.) to monitor door status. “Door Open Time” Interval: The period during which, after a user passes, the door is not monitored even if the sensor signal is disrupted.
Usaha Pickup Identifier: Upami identifier anu henteu kadaptar ditepikeun sababaraha kali berturut-turut, controller bakal asup kana modeu konci.
Jadwal: Interval waktos sareng jadwal anu nangtukeun hak aksés. Controller tiasa nyimpen dugi ka 250 interval waktos, 250 jadwal mingguan, sareng 250 liburan.
Time Zones: Time intervals used for organizing access schedules.
Loading: The transfer of settings from a computer to the controller after programming.
Pedaran jeung Operasi
Pangwangunan Controller
Penampilan éksternal alat dipidangkeun dina Gambar 1.
The controller consists of the following components:
- The top part of the device casing
- The touch exit request button
- The bottom part of the device casing
- A mounting screw
- The circuit board with terminal blocks
Gambar 1. Penampilan éksternal U-PROX IP401
Terminal Blok Layout
Tata perenah konektor dina papan handap dipidangkeun dina Gambar 2.
Tujuan Controller Kontak
| Kontak | Ngaran | Tujuan |
| GND | – | Connection of the external power source |
| +12V | – | – |
| NO/NC | Relay Kontak | Relay kontak |
| COM | Biasa | – |
| BEureum | +12V, Power | Reader connection |
| BLK | GND | – |
| GRN | Data 0 | – |
| WHT | Data 1 | – |
| GND | – | Sambungan loop |
| DC | Panto Kontak | – |
| RTE | Kaluar Tombol Request | – |
| KALUAR | Kaluaran Alarm | – |
Indikasi Audio-Visual
Modeu aksés dituduhkeun via pamaca disambungkeun ka controller. Indikasi standar nyaéta kieu:
- Standby Mode: no sound, red blinking once per second
- Night Mode or Lockout: no sound, red-yellow blinking once per second
- Alarm: no sound, continuous red
- Card Registration: no sound, green blinking once per second
- Initialization: no sound, no light indication
- Data Reading/Loading, Firmware Update: no sound, continuous red
- Access Granted: a short beep, continuously green; 5 seconds before door time expires – a short beep once per second.
- Access Denied: continuous beep, continuously red.
LED dina tombol touch ngan nunjukkeun pencét na.
Operasi Controller
Controllers dikirimkeun dina kaayaan standar pabrik, nu LED beureum blinks sakali per detik.
Pikeun beroperasi controller, éta kudu ngonpigurasi ngagunakeun software konfigurasi dina alat mobile. Sakali setélan dieusian, sarta lamun inputs gembleng, controller asup kana mode "Siaga".
Controller ngatur hiji titik petikan tunggal nu bisa beroperasi dina opat modus: "Siaga", "Alarm", "Lockout", sarta "Free Passage". Modeu "Free Passage" ngagaduhan prioritas pangluhurna (pikeun example, salila seuneu a), dituturkeun ku "Lockout", "Alarm", jeung "Standby".
Modeu sayaga
Modeu sayaga nyaéta mode operasi standar controller. Dina modeu ieu, controller masihan atanapi nampik aksés ka identifiers kadaptar.
Passage kalawan Presentasi Identifier
Pikeun ngaliwatan panto, pamaké nampilkeun identifier contactless ka nu maca. Mun identifier kadaptar sarta aksés ayeuna diwenangkeun, panto dibuka (controller ngaktifkeun mékanisme kaluaran).
Passage kalawan Identifier jeung PIN Code
After presenting a registered identifier, the controller checks if a PIN code is required. If needed, it waits for PIN code entry. Once the correct PIN code is entered, the passage point opens (the output mechanism is activated).
Passage via Tombol Permintaan Kaluar (Buka Panto Jauh)
Kaluar ngaliwatan panto ku titik petikan single-sided atawa ngidinan petikan nganjang kahontal ngagunakeun tombol pamundut kaluar. Mencét sareng ngaleupaskeun tombol ngabuka titik petikan (ngaktipkeun mékanisme kaluaran).
Aksés Ditolak kana Presentasi Identifier
Aksés tiasa ditolak kusabab alesan ieu:
- The controller is in its factory default (unloaded) state
- The card is not registered in the controller
- The card’s validity period has expired
- Access is currently prohibited due to time and/or day of the week
- An identifier registered as lost or blocked is presented
- The controller is in “Alarm” mode
- The controller is in “Lockout” mode
- The temporary card’s validity period has not yet begun
- The passage counter for a temporary card (visitor card) has been exhausted
Modeu alarem
The passage point enters “Alarm” mode when unauthorized access occurs (e.g., door breach), when the controller case is opened, when an identifier registered as lost is presented, or when the door remains open too long (exceeding the door open time), and if the identifier pickup function is enabled.
Dina modeu "Alarm", controller ngaktifkeun kaluaran ditunjuk pikeun ALARM atanapi SIREN. Kaluaran alarem tetep aktip dugi ka alarem diberesihan, sareng kaluaran sirineu waktosna.
Lamun titik petikan dina modeu "Alarm", petikan diblokir. Panto tiasa dibuka ku mencét tombol pamundut kaluar.
Modeu "Alarm" tiasa ditumpurkeun ku nampilkeun identifier sareng atribut "Alarm Clear" atanapi ku ngaluarkeun paréntah tina komputer.
Mode Passage Gratis
Dina sababaraha kaayaan, sapertos nalika kahuruan, gempa, atanapi kaayaan darurat sanés, panginten kedah muka panto pikeun jalan gratis. Dina kasus kawas, controller ngarojong mode "Free Passage".
Titik petikan asup kana mode "Free Passage" ku paréntah ti operator dina komputer.
Bari dina modeu "Free Passage", konci tetep kabuka, sarta controller log sagala dibere identifiers na entri kode salaku "Akses dibales" paduli jadwal. Modeu ieu dianggo pikeun ngawas ayana tanaga nalika kaayaan darurat.
To ensure proper operation in “Free Passage” mode when using mechanically actuated locking devices, it is essential to monitor the door sensor. Mechanical locks are released with a current pulse and remain open until the door is closed. When the door is closed, the lock re-engages.
The controller in “Free Passage” mode checks the door contact and sends an unlock pulse after each door closure.
If the controller is used without a door contact (e.g., a microswitch), using an “impulse” output type for unlocking is not recommended. In such cases, “Free Passage” mode will not function correctly – the door cannot be opened without presenting an identifier.
Modeu konci
The controller enters “Lockout” mode when a situation arises that requires all users to be denied access. In this mode, passage is allowed only for identifiers with the “Security Service” attribute.
Doors cannot be opened by pressing the exit request button.
Titik petikan asup kana mode "Lockout" ku paréntah ti operator komputer.
Pasipatan Identifier (Kartu)
Kode (Kode Kartu Éléktronik)
Unggal kartu boga kode unik na ditugaskeun salila manufaktur.
Kodeu PIN
Kodeu tambahan pikeun kartu. Éta kedah diwangun ngan ukur genep digit desimal. Éta tiasa dianggo sareng pamiarsa anu gaduh keypad terpadu.
Saatos kartu dibere ka nu maca, keypad terpadu dipaké pikeun ngasupkeun kodeu PIN ku mencét tombol "#". Lamun kodeu PIN bener diasupkeun, controller nu muka konci panto jeung masihan aksés. Upami teu kitu, sinyal peringatan dikaluarkeun, kajadian "Kode PIN Lepat" asup, sareng pantona tetep dikonci.
Validitas
Tanggal béakna validitas kartu urang.
Alarm Hapus
Nalika kartu kalayan atribut jelas alarem dibere ka nu maca hiji panto dina kaayaan alarem, log controller acara "Alarm diberesihan" na ngareset panto ka modeu sayaga. Lamun kartu tanpa hak mupus alarm dibere, panto tetep dina kaayaan kiwari sarta acara "Akses nampik. Alarm State "Log.
Service Kaamanan
Atribut ieu masihan hak pikeun ngaliwat panto anu dikonci. Lamun panto aya dina mode "Lockout", presenting kartu biasa bakal hasil dina "Akses ditolak. Lockout State "acara. Sanajan kitu, lamun kartu jeung atribut "Service Kaamanan" dibere, controller masihan aksés jeung log hiji "Akses dibikeun. Lockout State "acara.
VIP
Atribut ieu ngamungkinkeun aksés saratna (iwal lamun panto dina modeu lockout). Kartu VIP tiasa gaduh jadwal anu ditugaskeun; anti-duplikasi jeung validitas watesan teu berlaku. Éta ogé tiasa gaduh kode PIN.
Lamun panto aya dina modeu "Lockout", hiji identifier kalawan atribut VIP moal dibere aksés.
Anti-duplikasi ditumpurkeun
Ieu ngandung harti yén aksés geus dibikeun paduli arah petikan saméméhna, tapi masih tunduk kana jadwal ditugaskeun sarta atribut kartu séjénna.
Pilihan Pamakéan sareng Modeu Operasi Kaluaran
Kaluaran relay controller bisa diprogram salaku konci (kalawan setelan inversion pilihan). Kaluaran OUT tiasa diprogram salaku sirineu atanapi alarem. Salaku tambahan, unggal kaluaran ditugaskeun mode operasi: ngamimitian-eureun (kaluaran tetep aktip nalika kaayaan tetep, contona, dina modeu "Alarm"), impuls (kaluaran aktip pikeun durasi set), pemicu (kaluaran toggles dina acara kahiji sareng mareuman dina salajengna, jsb.), atanapi kontinyu (kaluaran diaktipkeun atanapi dinonaktipkeun ku paréntah individu).
Operasi komunikator
U-PROX IP401 controller beroperasi sacara otomatis. Sakali data dimuat ti server, controller nu ngolah aturan aksés pikeun kartu dibere sarta ngirimkeun bewara acara ka server sistem kontrol aksés.
The controller’s communicator operates in notification mode, meaning that when an event (e.g., passage, zone breach) occurs, data is transmitted to the AC server. When connected to a computer network, the controller ensures protection against unauthorized access by encrypting data packets with a 256-bit key and verifying the device’s unique serial number, as well as monitoring the communication channel through periodic test signals.
The U-PROX IP401 can be connected to a computer network via a wireless connection (Wi-Fi). It supports operation within a local network (see Figure 3) as well as over the Internet (see Figure 4), allowing for the construction of distributed access control systems of any scale.
Local Network Operation Algorithm
- After the controller is powered on, it connects to the pre-configured Wi-Fi and obtains an IP address dynamically.
- It periodically updates the IP address status (maintaining the reserved IP address);
- It checks the availability of the AC server (by IP or DNS name);
- It sends periodic test signals;
- It transmits event notifications.
- It waits for commands.
Internet (Wired Local Network) Operation Algorithm
- After the controller is powered on, it connects to the pre-configured Wi-Fi and obtains an IP address dynamically.
- It periodically updates the IP address status (maintaining the reserved IP address);
- It checks for Internet connectivity (availability of the router’s IP address);
- It checks the availability of the AC server (by IP or DNS name);
- It sends periodic test signals;
- It transmits event notifications;
- It waits for commands.
Prosedur Operasi Alat
Controller ieu disimpen dina wadah plastik leutik kalayan permukaan kaca.
Prosedur Sambungan
- At the installation site, mark and drill the necessary holes:
1. Screw in the mounting screw on the bottom of the controller;
2. Remove the top cover;
3. Using the back plate of the controller as a template, mark and drill two holes with a 5 mm diameter and a depth of 30 mm. - Run the cable from the power supply unit;
- Run the cable from the output device (e.g., lock);
- Install the reader and run its cable;
- Run the cables from the sensors/buttons;
- Connect the wires from the power supply, lock, reader, and controller inputs according to the sections below (using a junction box is recommended);
- Lay the installation cables in the wall;
- Install and secure the back plate of the controller, connect the communication cable connector, attach the top cover, and fasten with a screw;
- Using the mobile app, configure the network parameters of the controller;
- alat geus siap pikeun operasi.
Rekomendasi instalasi
Disarankeun pikeun masang controller dina témbok deukeut panto ku kituna sadaya pamaké bisa kalayan gampang mencet tombol pamundut kaluar.
Kakuatan sareng kabel-kabel sanésna henteu kedah langkung caket ti 0.1 m tina casing alat.
Sambungan Pamaca
The controller works with a reader that connects via the RS232 interface (only U-PROX readers) or via the RS485 interface using the OSDP protocol (U-PROX SE series or other OSDP2.2-compatible readers).
The reader connection type is configured via the U-PROX Config mobile app.
Angka 7. Sambungan pamaca séri U-PROX SE via OSDP
Konsumsi ayeuna unggal maca éksternal disambungkeun ka terminal "+ 12V" teu kudu ngaleuwihan 100 mA. Pikeun pamiarsa jarak jauh kalayan konsumsi di luhur 100 mA, kakuatan kedah disayogikeun tina sumber anu misah.
Sénsor Panto
Controller ngagunakeun kontak panto pikeun nangtukeun naha panto dibuka atawa ditutup. Upami kontak panto henteu aya, pangontrol moal tiasa ngadeteksi aksés anu teu sah atanapi kaayaan dimana panto tetep kabuka panjang teuing (contona, nalika sababaraha jalma ngalangkungan titik éntri anu sami).
Panto dina sistem kontrol aksés disarankeun pikeun dilengkepan panto ngadeukeutan.
Kaluar Tombol Request
Doors are opened by pressing and releasing the exit request button.
Additionally, the exit request button can be used for remote door opening (e.g., by a receptionist or security guard).
Ngagunakeun tombol dina konci listrik pikeun muka panto bakal memicu kajadian DOOR BREACH.
Alat Kaluaran (Relay)
Controller gaduh hiji relay solid-state pikeun ngontrol alat kaluaran sapertos konci listrik atanapi kancing.
Relay geus normal ditutup (NC) jeung normal muka kontak (NO) jeung bisa nanganan alat consuming nepi ka 1 A dina 30 V.
Voltage pakait atawa surges nalika sakabéh outputs anu switched atawa mareuman sakaligus teu kudu ngabalukarkeun controller mun malfungsi. Upami teu kitu, sumber kakuatan anu misah kedah dianggo pikeun kaluaran.
Konci listrik
Kamampuhan pikeun ngaprogram modeu operasi standar sareng tibalik, kitu ogé pikeun nyetél waktos aktivasina pikeun konci dina jarak anu lega (ti 1 dugi ka 255 detik), ngamungkinkeun pangontrol ngoperasikeun ampir sagala jinis konci listrik atanapi kancing.
Kasus khusus nyaéta nalika waktosna disetel ka 0. Dina hal ieu, pulsa 200 ms dikirim ka relay.
angka 10 nembongkeun example tina nyambungkeun alat kaluaran: kahiji diaktipkeun ku nerapkeun voltage (NO), jeung kadua ku motong circuit (NC).
Nalika nganggo kontak relay pikeun ngadalikeun beban induktif (pikeun example, konci éléktromagnétik),amplitud voltage pulsa bisa lumangsung. Pikeun nyegah karuksakan kontak relay, hiji dioda flyback kudu dipasang sakuliah beban induktif dina polaritasna sabalikna.
Catet yén konci éléktromagnétik murah teu toleran vol berkepanjangantage aplikasi. Pikeun alat ieu, waktu aktivasina relay kudu diprogram pikeun nyegah overheating coil.
Kaluaran Alarm
Kaluaran alarem controller nyaéta kaluaran transistor open-collector. Nalika diaktipkeun, kontak OUT disambungkeun ka GND.
Kaluaran alarem tiasa dianggo pikeun nyambung ka sistem alarem éksternal atanapi alat kaluaran kalayan konsumsi ayeuna henteu langkung ti 60 mA.
If a door contact (normally closed) is connected, the alarm output will activate when the door contact is interrupted, except during the designated “door open” interval. The alarm output is activated for a programmed duration, from 0 to 254 seconds. <p style=”font-weight:
Dokumén / Sumberdaya
 |
U-PROX IP401 Awan Aksés Controller [pdf] Instruksi Manual IP401 Awan Aksés Controller, IP401, Awan Aksés Controller, Aksés Controller |