VEVOR C110 TPMS RV Tire Pressure Monitoring System

Émbaran produk

spésifikasi

• model: C110
• Voltage: DC 12V
• kakuatan: 0.03W
• Test The Tire Pressure Range (Bar): 0.5-6
• Beurat bersih: 0.1 Kg

Parentah Pamakéan Produk

Fitur

1. Monitor the pressure and temperature of your tyres
2. Mode sare calakan pikeun hemat daya

Struktur

The product consists of a wrench, nut, sensor, and host.

Parameter Setting Reference

1. Before using the product, charge the display for 3-4 hours with the cigarette plug charger.
2. Setélan parameter standar pabrik:
   • Hl pressure alarm data: 3.0 Bar (0.6-6.0 Bar range)
   • Low-pressure alarm data: 2.0 Bar (0.5-5.9 Bar range)
   • Hl temperature alarm data: 68 (rentang 50-99)
   • Catetan: 1 Bar = 14.5 Psi

Instruksi Operasi

1. When the ACC is ON, the display will enter self-test mode for 2 seconds.
2. When the speed reaches 20 kilometers per hour, the sensor will activate and start detecting and sending pressure and temperature data.
3. Alarming instructions:
   • a) Over-pressure or leakage will trigger a warning.
   • b) High temperature will trigger an alarm with corresponding icons and sounds.
   • c) A low sensor battery will trigger a warning with icons and sounds.

BUBUKA

• Kami terus komitmen pikeun nyayogikeun anjeun alat harga anu kompetitif.
• Simpen Satengah", "Satengah Harga" atanapi ungkapan anu sami anu dianggo ku kami ngan ukur ngagambarkeun perkiraan tabungan anjeun tiasa nyandak kauntungan tina mésér alat-alat anu tangtu sareng kami dibandingkeun sareng merek-merek top utama, sareng henteu hartosna nutupan sadaya kategori alat anu ditawarkeun ku kami.
• Ieu instruksi aslina. Mangga baca sakabeh parentah manual taliti saméméh operasi. VEVOR cadangan interpretasi jelas ngeunaan manual pamaké urang.
• Penampilan produk bakal tunduk kana produk anu anjeun tampi. Punten ngahampura kami henteu nginpokeun ka anjeun deui upami aya apdet téknologi atanapi parangkat lunak dina produk kami.

Daptar PARAMETER

Modél	C110
Voltage	DC 12V
Kakuatan	0.03W
Test The Tire Pressure Range (Bar)	0.5-6
Beurat Net (Kg)	0.1

DAFTAR BAGIAN

OPERASI

FITUR

1. Monitor the pressure and temperature of your tyres
2. Mode sare calakan pikeun hemat daya
3. Tyre leaking warning
4. Visual and audible warning for abnormal tyre pressure and temperature
5. Displays up to 4 tyre temperatures and pressures at a glance
6. Can be set to Fixed Bar or PSI
7. Can be set to °C or °F temperature

Struktur

1. Unit tekanan
2. Unit suhu
3. Data tekanan
4. Data suhu
5. Sensor battery indicator
6. Tanda peringatan
7. Masukan voltage
8. SET”Button
9. (+) Tombol
10. port USB

PARAMETER SETTING RUJUKAN

1. Before using this product, please press any button on the display to turn it on, and charge the display for 3-4 hours with the cigarette plug charger.
2. Setélan parameter standar pabrik
   

   Setélan standar pabrik	rentang setelan parameter
   Hl pressure alarm data: 3.0Bar	0.6-6.0 Bar
   low-pressure alarm data:2.0Bar	0.5-5.9 Bar
   Hl temperature alarm data: 68℃	50-99 ℃

3. 1Bar=14.5Psi

PITUDUH OPERASI

1. When the ACC is ON, the display will get into self-test mode for 2 seconds. After 2 seconds, all icons will be displayed on the LCD screen and ready to receive the new data. When the ACC is OFF, the display will be OFF.
2. When the speed is up to 20 kilometers per hour, the sensor will be activated, and start to detect and send the Pressure and temperature data.
3. Alarming instruction
   • a) When tyre pressure is over the set range or the tyre is leaking, the corresponding tyre position icon, pressure data, and the alarm icon (!) will flash together, and the built-in buzzer will chirp as: Bi Bi ·.
   • Catetan: Press any button can stop the buzzer, but all corresponding icons still flash, buzzer will chirp once per minute.
   • b) When tyre temperature is over the set data, the according tyre position icontemperature data, and high temperature alarm icon (!) will flash together, and the built-in buzzer will chirp as: Bi Bi.
   • c) When the sensor battery is low, the icon * of the corresponding tyre position, the sensor’s low battery icon will flash together, and the built-in buzzer will chirp as: Bi Bi.
   • Catetan: To stop the buzzer, press the set buzzer.
   • Catetan: all icons will still flash, buzzer will “Chirp” once per minute.

STATUS alarem

Leaking or low tyre pressure alarm

• Contona: L.R. tyre leaking or low tyre pressure alarm. The corresponding tyre position icon, pressure data, and the alarm icon (!) will flash together.

High tyre pressure alarm

• Atur rentang: 1.7~3. 4Bar Contona: L.R. tyre high-pressure alarm. The corresponding tyre position icon , pressure data, and the alarm icons (!) will flash together.

High tyre temperature alarm

• Setélan standar pabrik: 70°C. E.g.: L. R. tyre high temperature alarm. Temperature data and high high-temperature alarm icon (!) will flash together.

Sensor batré low

• Sensor battery normal life: 3-5 years. E.g.: L.R. Tyre high temperature alarm. The tyre position icon sensor low battery icon bakal flash babarengan.

Sensor not work

• Contona: L.R. tire sensor does not work for the corresponding tyre position icon , pressure data, and the temperature will disappear together

WORK PARAMETER SETTING OPERATION

1. Lebetkeun sareng kaluar modeu setelan:
   • Press the “ SET ” button and hold on for 3 seconds, release the button after hearing 1 long chirp, the monitoring system will enter the setting mode. Press the “ SET ” button short time to recycle among the following settings: Bar-Psi, C >F, pressure Hl, pressure LO, alarm temperature HI. Press the (+) button to adjust the corresponding data. After finishing all settings, press the “ SET ” button and hold on for 3 seconds.
   • After hearing l short chirp, the system saves all set parameters and quits the setting mode.
   • (Catetan: After entering the setting mode, if there is no operation within 3 minutes, the system will quit the mode and back to normal working mode automatically)
2. Tyre pressure HI setting:
   • Press and hold the “ SET ” button for 3 seconds, release the button after hearing 1 long chirp, will enter the setting mode.
   • Then press the (+) button one by one to get into tyre pressure HI setting mode. The pressure HI data flash, press the (+) button to adjust the data, then press the “ SET ” button and hold on for 3 seconds, release the button after hearing a short chirp, the system saves the set data and quit the mode.
   • (Catetan: the set pressure HI data must be higher than the set pressure LO data. Pressure HI adjustable range: 0.6-6.0 Bar. Factory default setting: 3.0Bar)
3. Tyre pressure LO setting: Press and hold on the (+) button for 3 seconds.
   • Release the button after hearing a long chirp; the system enters the setting mode. Then press the “ SET ” button one by one to enter into tyre pressure LO setting status. The pressure LO data will flash press the (+) button to adjust the data, then press the “ SET ” button and hold for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
   • (Catetan: the set pressure LO data must be lower than the set pressure HI data. Pressure LO adjustable range: 0.5-5.9 Bar, Factory default setting: 2.0Bar)
4. Release the button after hearing the long chirp, and the system enters the setting mode.
   • Then press the (+) button one by one to get into alarm temperature HI setting status, the icon will flash, press the RIGHT button to adjust the data, then press the button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
   • (Catetan: temperature HI adjustable range: 50 ℃ – 99 ℃ Factory default setting: 68 ℃ )
5. Setélan unit tekanan: Press and hold on the (+) button for 3 seconds, release the button after hearing a long chirp. The system enters pressure unit setting mode. The Bar icon will flash, press the (+) button to adjust the unit, then press the set button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode. (Factory default setting: Bar)
6. Setélan suhu: Press and hold the (+) button for 3 seconds, release the button after hearing a long chirp, and the system enters the setting mode. Then press the (+) button one by one to get into the temperature unit setting status. The C icon will flash. Press the button to adjust the data, then press the button and hold on for 3 seconds, release the button after hearing l short chirp, the system saves the set data and quit the mode.
7. Tyre pressure code matching Long press the (+) button for 3 seconds and release it after hearing a long “Bi” to enter the tyre pressure code matching mode, the left front wheel icon and “_.” fash press the “ SET ” button to select the tyre to be matched, and the corresponding tyre after selection “_.” will flashing, at this time, inflate the corresponding tyre (The external sensor is directly screwed to the valve), after receiving the signal “_.” changes to the pressure value to indicate that the matching is successful, then short press the (+) button to jump to the next tyre. Follow the previous step to match other tyres. After matching, press and hold the (+) button for 3 seconds, save and exit. After a “Bi” (Entering the tyre matching mode without any action, the matching mode will automatically exit after 3 minutes)
   • (Catetan: The sensor and receiver have been matched before leaving the factory, and the sensor or receiver needs to be re-matched to change the sensor or receiver.)

INTERNAL SENSOR INSTALLATION

1. Jack up the car and remove the tire.
2. Remove the original valve.
3. Tighten up screw
4. Install the tire from the left side of the valve clockwise direction, avoiding the tire bead from hitting the valve and sensor.
5. Sénsor ngumpul
6. Tighten the valve by wrench and screw it (Torque value must be ≥ 4Nm)
7. Saimbang ban.
8. Mount the tire in its position.

Pamasangan sensor éksternal

1. Buka konci tutup klep.
2. Screw dina kacang.
3. Screw in the sensor.
4. Lock the sensor with an anti-theft wrench.

Movement / Replacement of battery

1. Peel off the non-slip gasket
2. Unscrew the sensor with a wrench

Émbaran FCC

Alat ieu saluyu sareng Bagian 15 Aturan FCC. Operasi tunduk kana dua kaayaan di handap ieu.

1. Produk ieu tiasa nyababkeun gangguan anu ngabahayakeun.
2. Produk ieu kedah nampi sagala gangguan anu ditampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.

PERHATOSAN: Parobahan atawa modifikasi teu dinyatakeun disatujuan ku pihak jawab minuhan bisa batal wewenang pamaké pikeun beroperasi alat!
PERHATOSAN: Parobahan atawa modifikasi kana produk ieu teu dinyatakeun disatujuan ku pihak nu. Tanggung jawab pikeun patuh tiasa ngabatalkeun wewenang pangguna pikeun ngoperasikeun produk.
Catetan: Produk ieu geus diuji sarta kapanggih sasuai jeung wates pikeun alat digital Kelas B nurutkeun Bagian 15 tina Aturan FCC. Watesan ieu dirarancang pikeun nyayogikeun panyalindungan anu wajar tina gangguan anu ngabahayakeun dina pamasangan padumukan.
Produk ieu ngahasilkeun, ngagunakeun, sareng tiasa mancarkeun énergi frekuensi radio, sareng upami henteu dipasang sareng dianggo saluyu sareng petunjuk, tiasa nyababkeun gangguan anu ngabahayakeun kana komunikasi radio. Nanging, teu aya jaminan yén gangguan moal lumangsung dina pamasangan khusus. Upami produk ieu nyababkeun gangguan anu ngabahayakeun kana panarimaan radio atanapi televisi, anu tiasa dipastikeun ku cara mareuman sareng ngahurungkeun produk, pangguna didorong nyobian ngabenerkeun gangguan ku hiji atanapi sababaraha ukuran di handap ieu.

• Reorient atawa mindahkeun anteneu panarima.
• Ningkatkeun jarak antara produk sareng panarima.
• Sambungkeun produk ka stop kontak dina sirkuit béda ti nu panarima disambungkeun.
• Taroskeun ka dealer atanapi teknisi radio/TV anu berpengalaman pikeun pitulung.

PEMBUANGAN BENER

• Produk ieu tunduk kana katangtuan European Directive 2012/19/EU. Lambang némbongkeun bin wheelie meuntas ngaliwatan nunjukkeun yén produk merlukeun kempelan ingkar misah di Uni Éropa.
• This applies to the product and all marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling of electrical and electronic device accessories

PALAYANAN PALANGGAN

• Produsén: Shanghaimuxinmuyeyouxiagongsi
• alamat: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.
• Diimpor ka AUS: SIHAO PTY LTD. 1 ROKEVA STEETEASTWOOD NSW 2122 Australia
• Diimpor ka AS: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
• YH consulting kawates.
• C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
• E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.

Sertipikat Garansi

• Rojongan Téknis sareng Sertipikat E-Garansi www.vevor.com/support

Patarosan anu sering ditaroskeun

How do I stop the buzzer alarm?

To stop the buzzer, press the set buzzer; please note that all icons will still flash, and the buzzer will chirp once per minute.

Dokumén / Sumberdaya

VEVOR C110 TPMS RV Tire Pressure Monitoring System [pdf] Instruksi Manual C110, C110 TPMS RV Tire Pressure Monitoring System, TPMS RV Tire Pressure Monitoring System, Tire Pressure Monitoring System, Pressure Monitoring System, Monitoring System

Rujukan

• Manual pamaké