WAKECAP WC-NODE-A Anchor Node Instruction Manual

WAKECAP WC-NODE-A Anchor Node

Riwayat révisi

Panjelasan Produk

The WakeCap Anchor Node (WC-NODE-A) is a fixed wireless mesh router designed for deployment on construction and industrial sites. It enables network coverage extension and improves positioning accuracy of helmet and asset nodes within the 2.4 GHz WakeCap mesh. Anchors are strategically installed based on project size, coverage, and density requirements.

Spésifikasi teknis

Kasus pamakéan has

• Extending mesh network coverage across large or complex worksites
• Backbone for positioning accuracy of helmet and asset nodes
• Infrastructure-level network reliability
• NFC tap-to-identify

Prosedur pangropéa

Preventive Guidelines

• Inspect housing regularly for cracks, water ingress, or corrosion.
• Verify gasket integrity during inspections.
• Avoid exposure to solvents, oils, or high-pressure water jets.
• Confirm NFC readability and dashboard reporting during site audits.

Ngagantian batré
Battery Type: 3.6V 19Ah ER34615 Lithium D-cell (non-rechargeable)
Estimated Life: 10–12 years depending on reporting interval

Léngkah ngagantian:

1. Move device to a designated safe maintenance area.
2. Unscrew the four stainless steel M4 hex screws on the enclosure (torque 1.5 Nm).
3. Remove enclosure cap and carefully disconnect PCB JST battery connector.
4. Remove depleted D-cell.
5. Insert new D-cell in correct polarity orientation.
6. Reconnect JST cable to PCB battery connector.
7. Ensure gasket is properly seated before resealing the enclosure.
8. Tighten M4 screws to 1.5 Nm torque.
9. Verify boot-up by tapping the device with NFC to read status.
   Notes: Use ESD-safe tools and dispose of lithium batteries properly.

Parentah beberesih

• Use soft cloth with mild soap and water.
• Do not use solvents, alcohol-based cleaners, or abrasive pads.
• Ensure humidity membrane is kept clear of debris.

Pembaruan firmware
Firmware is not user-updatable. If required, updates are deployed remotely via the mesh.
For update verification, contact WakeCap support.

Pitunjuk Ngungkulan

Kasalametan & minuhan

• Ingress Protection: pending
• Compliance: pending
• Battery Safety: Use only ER34615 D-cell. Do not short-circuit, recharge, or expose to fire.

Pernyataan Peringatan FCC

Alat ieu geus diuji sarta kapanggih matuh wates pikeun alat digital Kelas B, nurutkeun bagian 15 tina Aturan FCC. Watesan ieu dirarancang pikeun nyayogikeun panyalindungan anu wajar tina gangguan anu ngabahayakeun dina pamasangan padumukan. Alat ieu ngahasilkeun, ngagunakeun sareng tiasa mancarkeun énergi frekuensi radio sareng, upami henteu dipasang sareng dianggo saluyu sareng petunjuk, tiasa nyababkeun gangguan anu ngabahayakeun kana komunikasi radio. Nanging, teu aya jaminan yén gangguan moal lumangsung dina pamasangan khusus. Upami alat ieu nyababkeun gangguan anu ngabahayakeun kana panarimaan radio atanapi televisi, anu tiasa dipastikeun ku cara mareuman sareng ngaktipkeun alat, pangguna didorong pikeun nyobian ngabenerkeun gangguan ku salah sahiji atanapi langkung tina ukuran ieu:

• Reorient atawa mindahkeun anteneu panarima.
• Ningkatkeun separation antara alat jeung panarima.
• Sambungkeun alat-alat kana stop kontak dina sirkuit béda ti nu disambungkeun ka panarima.
• Taroskeun ka dealer atanapi teknisi radio/TV anu berpengalaman pikeun pitulung.

Awas: Sakur perobihan atanapi modifikasi kana alat ieu anu henteu disatujuan sacara eksplisit ku produsén tiasa ngabatalkeun wewenang anjeun pikeun ngoperasikeun alat ieu.
Alat ieu saluyu sareng bagian 15 tina Aturan FCC. Operasi tunduk kana dua kaayaan di handap ieu: (1) Alat ieu teu tiasa nyababkeun gangguan anu ngabahayakeun, sareng (2) alat ieu kedah nampi gangguan anu ditampi, kalebet gangguan anu tiasa nyababkeun operasi anu teu dipikahoyong.
Alatna parantos dievaluasi pikeun nyumponan sarat paparan RF umum.